Travertine Stripe Wall Sconce
VKW9-25108-01
- Standaard verzending naar de Verenigde Staten
- Levenslange garantie op alle producten
- 60 dagen retour- en omruilbeleid
- 24/7 Aftersales-ondersteuning, 24 uur per dag, 7 dagen per week
- Gepersonaliseerde aanpassing beschikbaar
- Inclusief lampen, de meeste verlichting dimbaar
- Veilige en beveiligde betalingen
- Compatibel met Noord-Amerika, Saoedi-Arabië, Europa en Australië-certificering
- Op voorraad, klaar voor verzending
Travertine Stripe Wall Sconce — vertical stone bar, warm up & down wash, two models.
A slim vertical bar of yellow travertine — ∅ 5 cm, just wide enough to hold two G9 sockets at its top and bottom ends — mounts flush to the wall and washes warm light upward and downward simultaneously. The stone surface catches and scatters the light outward along its length, the pores and fossil inclusions visible in the glow. The result is a wall composition that is architectural at distance and geological up close. Available in Model A and Model B (differing in stone orientation and vein pattern) and in three heights: 60, 80, and 120 cm.
Yellow Travertine — formed by nature, unrepeatable by craft
Each Travertine Stripe bar is cut from yellow travertine — a sedimentary limestone formed over millennia. The pore distribution, amber veins, fossil inclusions, and tonal variation of every piece differ. Product photographs are reference examples only. Your sconce will be its own singular geological object.
Tap to enlarge — travertine surface reference. Your piece will differ.
Vertical Travertine Bar
∅ 5 cm slim stone profile — a quiet geological line on the wall.
Up & Down G9 Wash
G9 at both top and bottom — warm light fans upward and downward across the wall.
3 Heights · 2 Models
60 / 80 / 120 cm × Model A and Model B — 6 configurations total.
Model A and B share the same dimensions. They differ in travertine cut and vein direction. Tap each image to enlarge.
∅ 1.9″ × H 23.6″
∅ 1.9″ × H 31.5″
∅ 1.9″ × H 47.2″
∅ 1.9″ × H 23.6″
∅ 1.9″ × H 31.5″
∅ 1.9″ × H 47.2″
G9 — 2 sockets (top + bottom), bulbs not included
Each sconce has two G9 sockets — one at the top of the stone bar and one at the bottom — each directing light outward from the stone's end face. A warm-white G9 LED at 2700–3000 K is strongly recommended — the warm amber tone enhances the travertine's fossil character and creates a rich upward-and-downward wall wash. A frosted G9 capsule LED at ~5W per socket is appropriate for the slim ∅ 5 cm bar form. Two bulbs are required per sconce.
Guide to G9 LED bulb selection →
| Materials | Yellow Travertine, Metal |
| Sizes (all models) | ∅ 5 × H 60 cm / ∅ 1.9″ × H 23.6″ ∅ 5 × H 80 cm / ∅ 1.9″ × H 31.5″ ∅ 5 × H 120 cm / ∅ 1.9″ × H 47.2″ |
| Models | Model A · Model B (different travertine cut and vein direction) |
| Bulb base | G9 — 2 sockets per sconce (top + bottom) |
| Light source | G9 LED or halogen capsule (not included) — 2 bulbs required |
| Light direction | Up & Down — warm wash from both ends of the stone bar |
| Voltage | AC 110–240V |
| Wiring | Hardwired |
| Control | Wall switch (not included) · Pull chain switch |
| Mounting | Wall — flush-mounted vertical |
| Environment | Indoor only |
| Body finish | Yellow Travertine (natural stone — each piece unique) |
| Shade finish | White (G9 capsule) |
| Stone variation | Natural — pore, vein, and colour differ between pieces |
| Certification | North America · EU · AU · Saudi Arabia |
What is the difference between Model A and Model B?
Both models are the same size and have the same G9 socket arrangement. The difference is the travertine block’s cut orientation — Model A and Model B represent different slicing directions through the stone, resulting in different vein patterns on the visible face of the bar. Because travertine is a natural material, the exact vein character of each individual piece will differ within each model regardless. If you are installing multiple sconces in a corridor or symmetrically, choosing the same model for all positions creates a more unified composition.
Which height should I choose?
The 60 cm version is proportioned for a standard-height wall installation — typically with the sconce’s vertical midpoint at approximately 140–160 cm from the floor, which places the light wash in a comfortable visual zone. The 80 cm version works well on taller walls or where the stone should read as a more significant vertical element — corridors, hallways, and above console tables. The 120 cm version is for architectural feature walls, double-height spaces, and positions where the sconce should anchor the full height of the wall surface between floor and ceiling.
Does the sconce light up both upward and downward simultaneously?
Yes — both G9 sockets are on the same circuit and light simultaneously when the switch is on. The upper G9 fans light upward along the wall above the stone; the lower G9 fans light downward along the wall below. This creates a warm bidirectional wash that traces the stone’s full height on the wall surface and is particularly effective in corridors where the dual wash creates a soft, even ambient illumination without a ceiling fixture.
Is the Travertine Stripe Sconce certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Mocht er sprake zijn van een probleem met de productkwaliteit of transportschade, dan bieden wij een gratis retour- en omruilservice aan. Zo garanderen wij een zorgeloze ervaring voor onze klanten.
Vakkerlight biedt een innovatieve 3D-lichtontwerpservice die uw verlichtingservaring naar een nieuw niveau tilt. Of u nu ontwerpt voor een woning, kantoor of commerciële ruimte, met deze service kunt u verlichtingsarmaturen visualiseren en afstemmen op uw specifieke behoeften in een realistische 3D-omgeving. Met deze service biedt Vakkerlight:
- Gepersonaliseerde verlichtingsoplossingen : U kunt samenwerken met hun ontwerpteam om op maat gemaakte verlichtingsopstellingen te creëren die precies passen bij de afmetingen en stijl van uw ruimte.
- Gedetailleerde visualisatie : Met de 3D-service kunt u zien hoe verschillende verlichtingsopties in uw kamer eruitzien. Zo kunt u vol vertrouwen uw keuzes maken voordat u met de installatie begint.
- Verbeterde klantenondersteuning : de ontwerpexperts van Vakkerlight begeleiden u door het proces en bieden suggesties en oplossingen op basis van uw voorkeuren en ruimtevereisten.
Dankzij deze service hoeft u niet langer te gokken op het gebied van verlichtingsontwerp, zodat u altijd de perfecte verlichtingsarmaturen voor uw huis of bedrijf kiest.
Voor meer informatie kunt u de officiële Vakkerlight 3D Lighting Design Service-pagina bezoeken.
Voor toegang tot 3D Max-bestanden of gedetailleerde productparameters kunt u contact opnemen met ons supportteam via info@Vakkerlight.com . Zij helpen u graag verder.
Welkom op de 3D-servicespagina van Vakkerlight! We zijn er trots op dat we uitgebreide ontwerpondersteuning bieden voor al uw verlichtingsbehoeften. Heeft u 3D-tekeningen, CAD-plannen of ruimtelijk ontwerp nodig? Ons ervaren supportteam staat voor u klaar.
