Verella Cast Resin Wall Sconce
VKW7-2657-01
- Standaard verzending naar de Verenigde Staten
- Levenslange garantie op alle producten
- 60 dagen retour- en omruilbeleid
- 24/7 Aftersales-ondersteuning, 24 uur per dag, 7 dagen per week
- Gepersonaliseerde aanpassing beschikbaar
- Inclusief lampen, de meeste verlichting dimbaar
- Veilige en beveiligde betalingen
- Compatibel met Noord-Amerika, Saoedi-Arabië, Europa en Australië-certificering
- Op voorraad, klaar voor verzending
Verella Cast Resin Wall Sconce
A solid block of cast resin — recessed at the center to a thinner panel where the integrated LED can shine through, rounded at the edges into a smooth pillow form that holds the texture of the casting mold. Two slim metal clips secure it to the wall, top and bottom, leaving the resin floating between them. When the LED is on, the recessed center glows from within: a vertical column of warm light pushing through the textured surface, diffused but unmistakable. The 20.5 × 31.5 cm scale fits either side of a mirror, a single statement wall, or a sequence along a hallway. Available in six colorways — two resin tones paired with brushed nickel, two with gunmetal, and two with brushed brass.
Cast Resin Plaque
Solid hand-cast block — ~5 kg of resin per piece, surface texture left as it came out of the mold.
Lit Inner Field
The center is recessed and translucent — the integrated LED glows through a softer, thinner section of the resin.
Six Colorways
Six resin tones — blue, green, gray, orange, tea, amber — each paired with one of three metal finishes.
Cast resin — not natural stone or glass
The plaque is solid hand-cast resin. The textured surface, color depth, and translucency are all engineered into the casting process. This is the correct material for the look — natural alabaster cannot be tinted into colors like blue or green, and glass cannot be cast with this kind of raw textured face. It is heavier and warmer-feeling than acrylic, but it is resin, not stone.
Lamp Body: Available in Matte Sand Gold, Black Antique Bronze, Natural Copper, and Satin Nickel.
Hardwired — connects to standard junction box
The Verella mounts to a standard US wall junction box and wires into your home's 110–240V supply. We recommend a licensed electrician for installation; estimate 20–30 minutes per fixture for an experienced installer.
Six colorways
Blue
Cool blue resin with warm brass hardware — the highest-contrast pairing of the six.
Green
Translucent green resin with darker gunmetal hardware — the most architectural of the six.
Gray
Neutral gray resin with gunmetal hardware — reads as a single dark object during the day.
Orange
Saturated orange resin with warm brass hardware — the boldest of the six, best as a single statement piece.
Tea
Smoky tea-brown resin with cool nickel hardware — warm resin against cool metal, balanced and easy to place.
Amber
Warm amber resin with cool nickel hardware — the most classic combination, suits transitional and modern rooms.
Light
3000K Warm White · 14W Integrated LED
The LED is built in behind the recessed center field and is not user-replaceable. 14W of warm white at 3000K — calibrated to flatter the warm resin tones (orange, tea, amber) and to keep the cooler tones (blue, green, gray) from going clinical.
Dimensions
Specifications
| Plaque material | Hand-cast solid resin (textured face) |
| Hardware material | Iron — brushed nickel, gunmetal, or brushed brass finish |
| Dimensions | W 20.5 × H 31.5 cm / W 8.1″ × H 12.4″ |
| Backplate | W 9 × H 31.5 cm / W 3.5″ × H 12.4″ |
| Wall projection | 9 cm / 3.5″ |
| Weight | 5.35 kg / 11.8 lb |
| Light source | Integrated LED, 14 W, 3000K warm white |
| Bulb replaceable | No — integrated LED |
| Coverage | 3–5 m² / 32–54 sq ft (accent / wall lighting) |
| Wiring | Hardwired — connects to standard US junction box |
| Voltage | 110–240 V (universal) |
| Certification | ETL listed — compatible with North America |
| Colorways | 6 — blue / green / gray / orange / tea / amber |
| Use environment | Indoor, dry locations only |
Installation
- Hardwired install. Mounts to a standard US wall junction box; licensed electrician recommended.
- Turn off power at the breaker before opening the existing junction box. Verify with a voltage tester.
- Connect black to black (line), white to white (neutral), and ground to the green or bare copper wire from the box.
- The fixture weighs 5.35 kg / 11.8 lb. Use the supplied hardware into a junction box anchored to a stud or rated for fixture weight; do not mount into drywall alone.
- For indoor use only. Not suitable for bathrooms, outdoor, or other damp locations.
Downloads
Frequently asked
Is the plaque resin or natural stone?
What happens if the LED burns out?
Do I need an electrician to install it?
How do I choose between the six colorways?
How do I clean the textured resin face?
Is the Verella certified for North America and Europe?
Mocht er sprake zijn van een probleem met de productkwaliteit of transportschade, dan bieden wij een gratis retour- en omruilservice aan. Zo garanderen wij een zorgeloze ervaring voor onze klanten.
Vakkerlight biedt een innovatieve 3D-lichtontwerpservice die uw verlichtingservaring naar een nieuw niveau tilt. Of u nu ontwerpt voor een woning, kantoor of commerciële ruimte, met deze service kunt u verlichtingsarmaturen visualiseren en afstemmen op uw specifieke behoeften in een realistische 3D-omgeving. Met deze service biedt Vakkerlight:
- Gepersonaliseerde verlichtingsoplossingen : U kunt samenwerken met hun ontwerpteam om op maat gemaakte verlichtingsopstellingen te creëren die precies passen bij de afmetingen en stijl van uw ruimte.
- Gedetailleerde visualisatie : Met de 3D-service kunt u zien hoe verschillende verlichtingsopties in uw kamer eruitzien. Zo kunt u vol vertrouwen uw keuzes maken voordat u met de installatie begint.
- Verbeterde klantenondersteuning : de ontwerpexperts van Vakkerlight begeleiden u door het proces en bieden suggesties en oplossingen op basis van uw voorkeuren en ruimtevereisten.
Dankzij deze service hoeft u niet langer te gokken op het gebied van verlichtingsontwerp, zodat u altijd de perfecte verlichtingsarmaturen voor uw huis of bedrijf kiest.
Voor meer informatie kunt u de officiële Vakkerlight 3D Lighting Design Service-pagina bezoeken.
Voor toegang tot 3D Max-bestanden of gedetailleerde productparameters kunt u contact opnemen met ons supportteam via info@Vakkerlight.com . Zij helpen u graag verder.
Welkom op de 3D-servicespagina van Vakkerlight! We zijn er trots op dat we uitgebreide ontwerpondersteuning bieden voor al uw verlichtingsbehoeften. Heeft u 3D-tekeningen, CAD-plannen of ruimtelijk ontwerp nodig? Ons ervaren supportteam staat voor u klaar.
