Acoustic Layered Pendant Lamp
VKP06-26628-02
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
Stacked aluminum fins wrapped in PET acoustic felt — a pendant that handles both tasks at once: diffusing warm light through the gaps between each layer, and absorbing mid-frequency echo at ceiling height. Three silhouettes cover different room proportions and ceiling heights: a tall Oval for high ceilings and narrow tables, a square Round cage where the bulb is fully visible, and a wide Disc that anchors larger dining tables. All three share the same six colorways, the same 15 W fixture rating, and the same E26/E27 socket so you choose the bulb. Bulb not included.
Bulb not included — use any E26 or E27
The pendant uses a standard E26 (North America) or E27 (Europe / worldwide) socket. We recommend a warm-white LED (2700–4000 K) up to the fixture's 15 W rating. An Edison filament globe shows beautifully through the layered fins. Choose a dimmable bulb if you want brightness control.
Hardwired ceiling install
This pendant hardwires to a ceiling junction box — it is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation.
Aluminum + PET construction
Rigid aluminum fins hold each PET acoustic layer at a fixed angle. The felt absorbs mid- and high-frequency reverb; the aluminum keeps the silhouette precise under the weight of larger sizes.
E26 / E27 socket
Standard screw base — works with any LED, warm-white, or Edison filament bulb. The layered fin gaps make a visible filament bulb a natural design choice.
3 shapes · 6 colors
Oval, Round, and Disc — each in Graphite, Sky Blue, Sage Green, Burgundy, Walnut, and Amber. Same colorway across all three silhouettes for a matched multi-pendant setup.
Oval
D480 × H580 mm
18.9″ × 22.8″
15 W
Tall silhouette — high ceilings, narrow tables, stairwell clusters.
Round
D400 × H400 mm
15.7″ × 15.7″
15 W
Square proportions — bulb fully visible; suits round dining tables and bedside clusters.
Disc
D660 × H380 mm
26″ × 15″
15 W
Wide, low profile — anchors large dining tables, kitchen islands, and open-plan living areas.
Default configuration
Select shape and color at checkout. Bulb not included — use any E26 (US) or E27 (worldwide) base up to 15 W. Email us for trade or bulk pricing.
E26 (North America) · E27 (Europe & worldwide) · Max 15 W
Standard screw base, compatible with any LED, warm-white, or Edison filament bulb. The layered fin gaps are wide enough to make a globe or ST64 Edison bulb visible from below — a warm, textural detail. Do not exceed the 15 W fixture rating. For dimming, use a Triac-dimmable LED and a compatible dimmer switch.
🔍 Dimensions — tap to enlarge
| Light source | E26 / E27 bulb (LED or Edison filament) — not included · max 15 W |
| Recommended bulb | Warm white LED, 2700–4000 K, Ra ≥ 90 equivalent · dimmable LED for brightness control |
| Shapes & sizes | Oval — D480 × H580 mm (18.9″ × 22.8″) Round — D400 × H400 mm (15.7″ × 15.7″) Disc — D660 × H380 mm (26.0″ × 15.0″) |
| Fixture wattage | 15 W (all three shapes) |
| Material | Aluminum frame + PET sound-absorbing acoustic felt fins |
| Colors | Graphite · Sky Blue · Sage Green · Burgundy · Walnut · Amber |
| Mounting | Hardwired ceiling pendant |
| Input voltage | AC 220–240 V |
| IP rating | IP20 — indoor, dry locations only |
| Dimmable | Yes — with a dimmable LED bulb and compatible dimmer switch |
| Best for | Dining room · kitchen island · open-plan office · loft apartment · acoustic treatment pendant · high-ceiling living area |
- Switch off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections.
- Screw your chosen E26 or E27 bulb into the socket. Do not exceed the 15 W fixture rating printed on the socket label.
- Hang height guide: bottom of shade 70–80 cm (28–32″) above the table surface for dining use. Oval suits narrow tables and high ceilings (≥3 m / 10 ft); Round suits 2–4 seat tables; Disc suits 4–8 seat tables and islands.
- For multi-pendant runs over a long table (≥200 cm), hang two Round or Oval units 60–80 cm apart on a shared canopy bar.
- To dim: use a Triac-dimmable LED bulb with a compatible leading- or trailing-edge dimmer switch. A non-dimmable bulb on a dimmer circuit will flicker or hum.
- PET felt fins: remove dust with a soft brush vacuum attachment on low suction or a lint roller. Do not wet-clean, steam, or use solvent cleaners — these deform the felt fibers. Aluminum hardware: wipe with a slightly damp cloth; dry immediately.
Does the bulb come included?
No — the bulb is not included. The pendant uses a standard E26 (North America) or E27 (Europe and worldwide) screw base, so any bulb up to 15 W from your local hardware store will fit. We recommend a warm-white LED in the 2700–4000 K range. The gap between the layered fins makes a globe or ST64 Edison filament bulb visible from below — a warm, textural detail worth considering.
Which shape should I choose?
The Oval (D480 × H580 mm) suits high-ceilinged rooms (3 m / 10 ft+) and narrow dining tables — its vertical mass fills ceiling height without overwhelming a small footprint. The Round (D400 × H400 mm) is square in proportion and works over round or square tables for 2–4 people; the bulb is fully visible through the cage. The Disc (D660 × H380 mm) is the widest of the three — it anchors a 6–8 seat dining table or a kitchen island without dropping too low. All three can be mixed in a multi-pendant run if you want varied heights.
Does the PET felt reduce room noise?
Yes. PET acoustic felt absorbs mid- and high-frequency sound waves rather than reflecting them. Positioning pendants at ceiling level targets the primary echo zone in open-plan dining rooms, offices with hard floors, and loft apartments with bare concrete. The effect is noticeable but not equivalent to full acoustic wall treatment — for more coverage, pair with additional wall or ceiling panels.
Which color works in my space?
Graphite works in almost any palette — it reads near-black in low light and dark charcoal in daylight. Sky Blue and Sage Green suit biophilic, Japandi, or Scandinavian interiors. Burgundy and Walnut pull warm tones from exposed wood, brick, and terracotta. Amber is the boldest choice — a single Disc in Amber over a neutral oak table makes it the focal point of the room. All six colorways are available in all three shapes, so a multi-pendant run can be color-matched.
Is it dimmable?
Dimming depends on the bulb, not the fixture. Choose any Triac-dimmable E26 or E27 LED bulb and pair with a compatible leading- or trailing-edge (Triac) wall dimmer. A non-dimmable bulb on a dimmer circuit will flicker or hum. Check the bulb packaging for dimmer compatibility before purchasing.
How do I clean the pendant?
PET felt fins: use a soft brush vacuum attachment on low suction, or roll with a lint roller. Do not wet-clean, steam, or use any solvent-based product — moisture deforms the felt fibers. Aluminum hardware: wipe with a lightly damp cloth and dry immediately to prevent water marks.
Do I need an electrician to install it?
Yes. This is a hardwired pendant that connects directly to the ceiling junction box. In the US, EU, and Australia, ceiling wiring work must be carried out by a licensed electrician. The canopy, ceiling plate, and hardware are included; the electrician handles the final wiring connections at the box.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
