Printed Fabric Petal Pendant Lamp
VKP1-2673-01
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- إرجاع لمدة 60 يومًا على العناصر المؤهلة
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- مدفوعات آمنة ومأمونة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- في المخزون، وعلى استعداد للشحن
A petal-form fabric pendant suspended from a retractable spring tube — the shade panels are cut from printed fabric and assembled into a layered bloom silhouette, with a scalloped lower hem and a solid wood bead drop at the centre. The spring tube suspension is the practical differentiator: it stretches and compresses to let you raise or lower the pendant by hand at any time, without tools or rewiring, to suit the activity below. A 3000K E27 LED bulb is included.
E27 LED bulb included — 3000K warm white
A 3000K warm-white E27 LED bulb ships with every pendant. Hang it, wire it, screw in the bulb, and it is ready. Any standard E27 bulb also fits the socket.
Hardwired ceiling install · Retractable spring tube
This pendant hardwires to a ceiling junction box. The black spring tube extends up to 1.5 m and compresses back toward the ceiling — pull the shade down to lower it, push up to raise it. A licensed electrician is recommended for the initial wiring. Always turn off power at the breaker before installation.
Petal Fabric Shade
Printed fabric panels assembled into a layered bloom form — scalloped lower hem and a solid wood bead drop at the centre bottom.
1.5 m Retractable Spring Tube
Pull down to lower, push up to raise — adjust the hanging height by hand at any time without tools or rewiring.
Solid Wood + Hardware
Solid wood bead drop and hardware fittings — warm natural accents that complement the printed fabric shade.
3000K Bulb Included
A warm-white E27 LED at 3000K ships in the box — no separate bulb purchase needed.
Soft Diffused Glow
The fabric shade diffuses light warmly downward — the printed pattern reads as a subtle texture when lit from within.
3 Sizes
Ø40 · Ø50 · Ø60 cm — suited to rooms of 10–18 m² (110–195 sq ft).
Small — Ø40 cm
15.7″ wide. Over a 2-person table, bedside, or reading nook. Shade height: CONFIRM BEFORE PUBLISHING.
Medium — Ø50 cm
19.7″ wide. Versatile solo pendant over a 2–4 person table or compact island. Shade height: CONFIRM BEFORE PUBLISHING.
Large — Ø60 cm
23.6″ wide. Over a 4–6 person table or bedroom focal point. Shade height: CONFIRM BEFORE PUBLISHING.
Spring tube reach
The black spring tube extends up to 1.5 m from the ceiling canopy. For dining tables, pull the shade so the bottom sits 70–80 cm (28–32″) above the tabletop. Push up to raise for ambient lighting.
E27 Medium Screw Base · 3000K LED bulb included
The included 3000K warm-white LED is ready to use out of the box. To dim, swap for a Triac-dimmable E27 LED and pair with a Triac wall dimmer switch.
Dimensions — tap to enlarge
| Material | Printed fabric shade · Solid wood bead drop · Metal hardware |
| Finish | Cream printed fabric + natural wood + matte black hardware |
| Sizes | Ø40 cm · Ø50 cm · Ø60 cm — shade heights CONFIRM BEFORE PUBLISHING |
| Light source | E27 medium screw base · 3000K LED bulb included |
| Suspension | Retractable black spring tube · extends up to 1.5 m |
| Canopy | Matte black (all sizes) |
| Installation | Hardwired ceiling pendant (junction box required) |
| Voltage | AC 110–240 V · 50/60 Hz |
| IP rating | IP20 — indoor dry locations only |
| Dimmable | Yes — replace included bulb with Triac-dimmable E27 LED + compatible dimmer |
| Recommended room size | 10–18 m² (110–195 sq ft) |
| Best for | Dining room, bedroom, living room — traditional, French country, cottagecore interiors |
- Switch off power at the breaker before installation. A licensed electrician is recommended — the electrical cord runs inside the spring tube and connects to the ceiling junction box at the top.
- Once installed and powered, adjust hanging height by hand: pull the shade downward to extend the spring, or push upward to compress it. The spring holds its position through tension — no locking needed.
- For dining tables, pull the shade so the bottom sits 70–80 cm (28–32″) above the tabletop. Raise for ambient lighting when the table is not in use.
- Screw the included E27 3000K LED bulb into the socket. To dim, replace with a Triac-dimmable E27 LED and pair with a Triac wall dimmer.
- Dust the fabric shade with a soft brush or low-suction vacuum. Spot-clean with a barely damp cloth — do not soak. Wipe the wood bead drop and hardware with a dry microfiber cloth.
How does the retractable spring tube work?
The pendant hangs from a coiled black spring tube. Pull the shade downward to lower it; push upward to raise it. The spring holds position through tension with no locking mechanism. The tube extends up to 1.5 m and compresses to roughly 30 cm when fully raised. All height adjustments are done by hand after the initial hardwired installation.
Does it need an electrician to install?
Yes — this is a hardwired pendant. The electrical cord runs inside the spring tube and connects to your ceiling junction box. A licensed electrician is recommended for the initial installation. All height adjustments afterwards require no tools and no further electrical work.
Is a bulb included?
Yes — a 3000K warm-white E27 LED bulb ships with every pendant. Any standard E27 base also fits.
Which size should I choose?
The Ø40 cm suits a 2-person table or bedside. The Ø50 cm is the most versatile for a 2–4 person table. The Ø60 cm works over a 4–6 person table or as a bedroom focal point. The retractable spring lets you fine-tune height after installation.
Is it dimmable?
The included bulb is non-dimmable. Swap it for a Triac-dimmable E27 LED and pair with a Triac wall dimmer to add dimming.
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
