Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp
Sash Pleated Fabric Pendant Lamp

Sash Pleated Fabric Pendant Lamp

VKP1-26921-01

Preço normal$352.00
/
Envio calculado na finalização da compra.


  • Em estoque
  • Inventory no caminho
Envio grátis (EUA)Feito por encomenda · 4–6 semanas
Devoluções em 60 diasSem instalar, embalagem original
Medidas por encomendaCabo, altura e espelho à medida
Apoio de design gratuitoEnvie uma foto, receba um plano
Detalhes de envio e devoluções ↓

The Sash Pleated Fabric Pendant wraps a vertically pleated fabric shade around a slim black ring band that cinches the silhouette partway down, dividing it into an upper section and a flared lower skirt, hung from a round black ceiling canopy on an adjustable cord. It's offered in three style profiles — a shorter single-taper flare, a taller drum-neck-and-skirt profile, and the tallest profile with a subtly stepped edge at the base — across eight size and style combinations, all made to order.


Pleated shade w/ ring-band accent

Fine vertical pleats run the length of the fabric shade, cinched partway down by a slim black ring band that divides it into an upper section and a flared skirt.

Three style profiles

Style A keeps a short, single-taper flare below the band; Style B adds a taller drum neck above a wide skirt; Style C is the tallest, with a subtly stepped edge at the base.

Eight made-to-order sizes

Style A is offered in two diameters; Styles B and C in three each, for eight size and style combinations in total, all built to order.


Style A — 50 cm

Φ50 x H34 cm shade, a short single-taper flare below the ring band. Recommended for 8–12 m² rooms.

Style A — 60 cm

Φ60 x H40 cm shade, a short single-taper flare below the ring band. Recommended room size wasn't stated in the source.

Style B — 50 cm

Φ50 x H62 cm shade, a taller drum neck flowing into a wide conical skirt. Recommended for 8–12 m² rooms.

Style B — 60 cm

Φ60 x H74 cm shade, a taller drum neck flowing into a wide conical skirt. Recommended room size wasn't stated in the source.

Style B — 70 cm

Φ70 x H86 cm shade, a taller drum neck flowing into a wide conical skirt. Recommended room size wasn't stated in the source.

Style C — 50 cm

Φ50 x H69 cm shade, the tallest profile, with a subtly stepped flare at the base. Recommended room size wasn't stated in the source.

Style C — 60 cm

Φ60 x H83 cm shade, the tallest profile, with a subtly stepped flare at the base. Recommended for 10–15 m² rooms.

Style C — 70 cm

Φ70 x H97 cm shade, the tallest profile, with a subtly stepped flare at the base. Recommended room size wasn't stated in the source.


Add product dimension image here.

Style A — 50 cm Dia 50cm x H 34cm / ∅ 19.7″ x H 13.4″
Style A — 60 cm Dia 60cm x H 40cm / ∅ 23.6″ x H 15.7″
Style B — 50 cm Dia 50cm x H 62cm / ∅ 19.7″ x H 24.4″
Style B — 60 cm Dia 60cm x H 74cm / ∅ 23.6″ x H 29.1″
Style B — 70 cm Dia 70cm x H 86cm / ∅ 27.6″ x H 33.9″
Style C — 50 cm Dia 50cm x H 69cm / ∅ 19.7″ x H 27.2″
Style C — 60 cm Dia 60cm x H 83cm / ∅ 23.6″ x H 32.7″
Style C — 70 cm Dia 70cm x H 97cm / ∅ 27.6″ x H 38.2″
Suspension Cord Adjustable; default drop length and canopy size weren't stated in the source

Product Name Sash Pleated Fabric Pendant
Product Type Fabric Pendant, Pleated Shade with Ring-Band Accent, 3 style profiles, 8 size combinations
Material Fabric Shade (pleated), Metal Ring Band & Ceiling Canopy (observed from reference photos; not stated in the source text)
Finish Matte Black Metal / Cream Fabric, as shown; not offered in alternate finishes or colors in the source listing
Style & Size Options Style A (Φ50, Φ60 cm), Style B (Φ50, Φ60, Φ70 cm), Style C (Φ50, Φ60, Φ70 cm) — 8 combinations total, made to order
Shade Size Φ50–70 cm depending on style/size selection (see Dimensions)
Light Source LED, 3000K warm white; exact socket/base type wasn't stated in the source listing
Included Bulb Not specified — bulb inclusion wasn't stated in the source listing
Recommended Room Size 8–12 m² (Style A/B at 50 cm); 10–15 m² (Style C at 60 cm); not stated for other size/style combinations
Suspension Adjustable cord; default drop length wasn't stated in the source listing
Mounting Ceiling Pendant, Round Canopy
Environment Indoor
Suitable Spaces Dining table, bedside, entryway, living room

  • Mount to a secure ceiling junction box using hardware suitable for the fixture weight; installation should follow local electrical requirements.
  • The suspension cord can be shortened or lengthened by an installer to suit ceiling height; default drop length wasn't stated in the source listing — please confirm with us before ordering.
  • The exact socket/base type and bulb inclusion weren't specified in the source listing — please confirm both with us before ordering. LED, 3000K warm white is the recommended light source.
  • Dust the pleated fabric shade gently with a soft brush or lint roller, working along the pleats; spot-clean with a dry cloth only, and avoid water or solvents, which can mark the fabric or flatten the pleating.
  • Wipe the black ring band and ceiling canopy with a soft, dry cloth to preserve their finish.
  • Intended for indoor, dry use.


What is the Sash Pendant made from?

A vertically pleated fabric shade cinched by a slim black metal ring band partway down its height, hung from a round black ceiling canopy on an adjustable cord.

What style and size options are available?

Three style profiles — A, B, and C — across eight size and style combinations: Style A in Φ50 or Φ60 cm, and Styles B and C each in Φ50, Φ60, or Φ70 cm. All are made to order.

What's the difference between Style A, B, and C?

Style A has a short, single-taper flare below the ring band. Style B adds a taller drum neck above a wide conical skirt. Style C is the tallest profile, with a subtly stepped, layered edge at the base.

Is this available in other colors or finishes?

It's offered in the one look shown — a cream pleated fabric shade with a matte black ring band and canopy. Alternate colors or finishes weren't offered in the source listing.

What light source does it use?

LED, 3000K warm white is the recommended light source. The exact socket/base type and whether a bulb is included weren't specified in the source listing — please confirm both with us before ordering.

How do I clean it and install it?

Dust the pleated fabric shade with a soft brush or lint roller and spot-clean with a dry cloth only; wipe the ring band and canopy with a soft, dry cloth. The suspension cord is adjustable, though its default drop length wasn't stated in the source listing — please confirm with us before ordering.

Se for um problema de qualidade do produto ou dano no transporte, forneceremos serviços de devolução e troca gratuitos, garantindo uma experiência sem complicações para os nossos clientes. Leia a Política Completa de Devoluções e Reembolso; se a sua encomenda chegar danificada, consulte o que fazer quando recebe um artigo danificado (comunicar dentro de 72 horas) e o nosso guia de envio e rastreamento.

Design com confiança: Serviço de Design de Iluminação 3D da Vakkerlight

Elimine o improviso no design de iluminação. Quer para espaços residenciais ou comerciais, o nosso Serviço de Design de Iluminação 3D permite-lhe visualizar e personalizar luminárias num ambiente 3D realista antes de comprar.

  • Soluções personalizadas: arranjos sob medida para o seu espaço exato.
  • 3D fiel à realidade: veja como as suas luminárias ficarão antes da instalação.
  • Apoio especializado: orientação personalizada dos nossos especialistas em design.

Recursos e apoio: visite a página do Serviço de Design de Iluminação 3D para saber mais. Precisa de ficheiros 3D Max ou parâmetros detalhados do produto? Envie um email para info@vakkerlight.com e a nossa equipa ficará feliz em ajudar.

Folhas de corte do produto (Google Drive) →

Bem-vindo à página de Serviços 3D da Vakkerlight! Orgulhamo-nos em oferecer suporte de design abrangente para atender a todas as suas necessidades de iluminação. Se necessitar de desenhos 3D, planos CAD ou serviços de design de espaço, a nossa equipa de suporte experiente está aqui para ajudar.

Este site está protegido pela Política de privacidade da hCaptcha e da hCaptcha e aplicam-se os Termos de serviço das mesmas.

Before you order

Shipping, returns & support

Shipping

Free standard shipping to the U.S., Canada, Australia, the U.K., France and Germany · made to order, ≈ 4–6 weeks · expedited ≈ 1–3 weeks.

Shipping policy →
60-day returns

Uninstalled items in original packaging, within 60 days of delivery. No restocking fee.

Return policy →
Free design support

Not sure about size, drop height or layout? Send a room photo and your ceiling height — our team replies with a placement plan and 3D / CAD files on request, free of charge.

Get design help →
Changes & damage

Cancel free within 48 hours. Damaged on arrival? Report within 72 hours — replaced, repaired or refunded.

How it works →

Questions? Mon–Fri 9 AM–6 PM EST · +1 (800) 715-2593 · info@vakkerlight.com

Também pode gostar de


Visto recentemente

For the trade

Vakkerlight Trade

Designers, architects, hotels and restaurants: project pricing, multi-unit quotes and a dedicated contact from drawing to delivery.

  • Trade pricing across the catalog
  • 3D / CAD files on request
  • Custom lengths & finishes
  • Project lead-time planning
Apply for a trade account

Made to order

Need a different size, cable or canopy?

Send us your ceiling height and a photo of the room. We'll draw a drop plan and confirm the build before anything goes into production.

  • Drop & cable length
  • Canopy size & sloped-ceiling canopy
  • Light count & dimming
  • Voltage for your country
Start a custom request