Lotus Petal Fabric Pendant Light
VKP4-2672-01
- Standaard verzending naar de Verenigde Staten
- Levenslange garantie op alle producten
- 60 dagen retour- en omruilbeleid
- 24/7 Aftersales-ondersteuning, 24 uur per dag, 7 dagen per week
- Gepersonaliseerde aanpassing beschikbaar
- Inclusief lampen, de meeste verlichting dimbaar
- Veilige en beveiligde betalingen
- Compatibel met Noord-Amerika, Saoedi-Arabië, Europa en Australië-certificering
- Op voorraad, klaar voor verzending
A dome of petal-shaped panels stitched from natural plant fiber and outlined in matte black iron — the silhouette of a lotus in full bloom, translated into a pendant shade. Each panel is a slightly curved leaf of woven fiber; together they form a closed half-sphere that diffuses light evenly downward through the fabric. The black iron seams between panels give the form its structure and its graphic quality. Available in Ø50, Ø60, and Ø80 cm. A 3000K E27 LED bulb is included.
E27 LED bulb included — 3000K warm white
A 3000K warm-white E27 LED bulb is included with every pendant — ready to hang and switch on straight away. If you prefer a different color temperature, any standard E27 bulb fits the socket.
Hardwired ceiling install
This pendant hardwires to a ceiling junction box. The suspension cord is adjustable — bundle or trim excess during installation. A licensed electrician is recommended. Always turn off power at the breaker before installation.
Natural Plant Fiber Panels
Each petal panel is woven from natural plant fiber — a fine, linen-like material that diffuses light warmly and evenly through the closed dome.
Lotus Dome Form
The closed half-sphere silhouette — inspired by the lotus — directs light downward evenly, with no hot spot or bare-bulb glare from below.
Matte Black Iron Seams
Slim iron ribs trace the outline of each petal — the contrast of black metal against natural fiber gives the shade its architectural quality.
3000K Bulb Included
A warm-white E27 LED at 3000K ships in the box — hang it, wire it, screw in the bulb, done.
Adjustable Cord
Suspension cord adjusts to your ceiling height — bundle or trim during installation for a clean finish.
3 Sizes
Ø50 · Ø60 · Ø80 cm — suited to rooms from 15 to 20 m² (160–215 sq ft) per the supplier's recommendation.
Small — Ø50 × H18 cm
19.7″ × 7.1″. Over a 2–4 person dining table, a bedside, or as part of a staggered cluster of two or three.
Medium — Ø60 × H22 cm
23.6″ × 8.7″. A confident solo pendant over a 4-person table or kitchen island — the most versatile of the three.
Large — Ø80 × H29 cm
31.5″ × 11.4″. A statement pendant over a 4–6 person table, a generous island, or an open-plan living area.
Hanging height guide
For dining tables, hang the bottom of the shade 70–80 cm (28–32″) above the tabletop. The adjustable cord accommodates most ceiling heights — confirm the maximum cord length with us if your ceiling exceeds 3 m (10 ft).
E27 Medium Screw Base · 3000K LED bulb included
The included 3000K warm-white LED is ready to use out of the box. The closed dome diffuses light evenly through the fiber panels — the warmer the bulb, the softer the glow. To dim, swap the included bulb for a Triac-dimmable E27 LED and pair with a Triac-compatible wall dimmer switch.
🔍 Dimensions — tap to enlarge
| Material | Natural plant fiber panels · Matte black iron frame seams |
| Finish | Natural off-white — one colorway |
| Sizes | Small: Ø50 × H18 cm (19.7″ × 7.1″) Medium: Ø60 × H22 cm (23.6″ × 8.7″) Large: Ø80 × H29 cm (31.5″ × 11.4″) |
| Light source | E27 medium screw base · 3000K LED bulb included |
| Cord | Adjustable length — trim or bundle to fit ceiling height |
| Installation | Hardwired ceiling pendant (junction box required) |
| Voltage | AC 110–240 V · 50/60 Hz |
| IP rating | IP20 — indoor dry locations only |
| Dimmable | Yes — replace included bulb with a Triac-dimmable E27 LED and use a compatible dimmer switch |
| Recommended room size | 15–20 m² (160–215 sq ft) |
| Best for | Dining room, bedroom, living room, tea room — Japandi, bohemian, and natural-material interiors |
- Switch off power at the breaker before installation. A licensed electrician is recommended for hardwired ceiling connection to the junction box.
- Adjust the cord to your preferred hanging height before securing the canopy. For dining tables, position the bottom of the dome 70–80 cm (28–32″) above the tabletop.
- Screw the included E27 3000K LED bulb into the socket and restore power. To use a different bulb, any standard E27 base fits the socket.
- To dim: replace the included bulb with a Triac-dimmable E27 LED and pair with a Triac-compatible wall dimmer switch.
- Dust the fiber panels gently with a soft brush or low-suction vacuum with a brush attachment. Spot-clean with a barely damp cloth if needed — avoid soaking the natural fiber. Wipe the iron frame seams with a dry microfiber cloth.
Is a bulb included?
Yes — a 3000K warm-white E27 LED bulb ships in the box. Hang the pendant, wire it to the junction box, screw in the bulb, and it is ready to use. If you prefer a different color temperature, any standard E27 base will fit the socket.
Which size should I choose?
The Ø50 cm (small) works over a 2–4 person dining table, above a bedside table, or as one pendant in a staggered pair or trio. The Ø60 cm (medium) is the most versatile single pendant — suited to a 4-person table or a compact kitchen island. The Ø80 cm (large) is best over a 4–6 person table or in a larger room where you want the pendant to read as a focal point. The supplier recommends these three sizes for rooms of 15–20 m² (160–215 sq ft).
What does the light look like through the fiber panels?
The natural plant fiber diffuses light softly and evenly — the glow through the dome is warm and consistent with no visible hot spots or bulb shadow. The iron seams cast thin dark lines across the shade, adding a subtle geometric pattern when lit. The 3000K included bulb gives a warm amber-white tone that flatters the natural fiber color.
How is this different from the Raffia Petal Pendant?
The Raffia Petal Pendant has open, overlapping petals with an exposed bare bulb at the center — light radiates outward and upward through the gaps. This Lotus Petal Pendant is a fully closed dome that diffuses light downward through the fabric panels, with no visible bulb from below. The lotus pendant gives a softer, more even pool of light; the raffia petal pendant is more dramatic and sculptural. Both use natural plant fibers edged in matte black iron.
Is it dimmable?
The included bulb is a standard (non-dimmable) E27 LED. To add dimming, swap it for a Triac-dimmable E27 LED bulb and pair with a Triac-compatible wall dimmer switch — available at any hardware store.
What interior styles does this suit?
The lotus petal form and natural off-white fiber fit naturally into Japandi, bohemian, wabi-sabi, and Asian-inspired interiors. The matte black iron seams give it enough graphic structure to work in contemporary and minimalist rooms as well. It pairs well with warm wood tones, linen textiles, rattan furniture, and stone or ceramic surfaces.
Mocht er sprake zijn van een probleem met de productkwaliteit of transportschade, dan bieden wij een gratis retour- en omruilservice aan. Zo garanderen wij een zorgeloze ervaring voor onze klanten.
Vakkerlight biedt een innovatieve 3D-lichtontwerpservice die uw verlichtingservaring naar een nieuw niveau tilt. Of u nu ontwerpt voor een woning, kantoor of commerciële ruimte, met deze service kunt u verlichtingsarmaturen visualiseren en afstemmen op uw specifieke behoeften in een realistische 3D-omgeving. Met deze service biedt Vakkerlight:
- Gepersonaliseerde verlichtingsoplossingen : U kunt samenwerken met hun ontwerpteam om op maat gemaakte verlichtingsopstellingen te creëren die precies passen bij de afmetingen en stijl van uw ruimte.
- Gedetailleerde visualisatie : Met de 3D-service kunt u zien hoe verschillende verlichtingsopties in uw kamer eruitzien. Zo kunt u vol vertrouwen uw keuzes maken voordat u met de installatie begint.
- Verbeterde klantenondersteuning : de ontwerpexperts van Vakkerlight begeleiden u door het proces en bieden suggesties en oplossingen op basis van uw voorkeuren en ruimtevereisten.
Dankzij deze service hoeft u niet langer te gokken op het gebied van verlichtingsontwerp, zodat u altijd de perfecte verlichtingsarmaturen voor uw huis of bedrijf kiest.
Voor meer informatie kunt u de officiële Vakkerlight 3D Lighting Design Service-pagina bezoeken.
Voor toegang tot 3D Max-bestanden of gedetailleerde productparameters kunt u contact opnemen met ons supportteam via info@Vakkerlight.com . Zij helpen u graag verder.
Welkom op de 3D-servicespagina van Vakkerlight! We zijn er trots op dat we uitgebreide ontwerpondersteuning bieden voor al uw verlichtingsbehoeften. Heeft u 3D-tekeningen, CAD-plannen of ruimtelijk ontwerp nodig? Ons ervaren supportteam staat voor u klaar.
