Embroidered Floral Fabric Pendant Light
VKP-26621-01
- Standaard verzending naar de Verenigde Staten
- Levenslange garantie op alle producten
- 60 dagen retour- en omruilbeleid
- 24/7 Aftersales-ondersteuning, 24 uur per dag, 7 dagen per week
- Gepersonaliseerde aanpassing beschikbaar
- Inclusief lampen, de meeste verlichting dimbaar
- Veilige en beveiligde betalingen
- Compatibel met Noord-Amerika, Saoedi-Arabië, Europa en Australië-certificering
- Op voorraad, klaar voor verzending
Embroidered Floral Fabric Pendant Light — Rose Embroidery with Pearl Trim, 3 Sizes
A pleated fabric dome shade — available in Dia 40, 50, or 60 cm — hangs from a dark wood-finish rod and canopy. The off-white fabric ground carries hand-embroidered pink roses and green leaves placed across the panels, with a row of small pearl beads stitched along the scalloped lower hem. The single E27 socket inside the dome casts diffused downward light through the fabric, producing a warm, even glow across a bedroom nightstand, dining table, or kitchen breakfast nook. The pleated construction holds the shade's bell profile without an inner wire cage visible from below.
Key Features
Rose Embroidery on Fabric
Pink rose and green leaf motifs embroidered directly onto the off-white fabric panels — not printed or applied.
Pearl Bead Hem Trim
A continuous row of small pearl beads lines the scalloped lower edge, visible from below when the light is on.
3 Sizes Available
Dia 40 cm (15.7"), 50 cm (19.7"), or 60 cm (23.6") — same design scaled for different table and room sizes.
Dark Wood Rod & Canopy
The hanging rod and ceiling canopy use a dark walnut-tone wood finish — no visible metal hardware from below.
Pleated Bell Profile
Vertical pleats run the full height of the shade, forming a structured dome that holds shape without sagging.
E27 Standard Socket
Single E27 base — compatible with standard LED bulbs. Bulb not included.
About the Embroidered Fabric Shade
The embroidery is applied panel by panel before the shade is assembled. Slight variation in the position of rose motifs between individual units is a normal result of hand-embroidery, not a quality defect. The pearl bead trim is hand-stitched along the hem and may show minor spacing irregularities consistent with handwork.
Bulb Not Included
This pendant uses a single E27 socket. For warm ambient light through the fabric shade, use a 6–10W LED at 2700–3000K. Avoid incandescent or halogen bulbs above 25W — the heat output is too close to the fabric material.
Size Options
| Size | Diameter | Best For | Socket |
|---|---|---|---|
| Small | Φ40 cm / 15.7" | Bedside table, reading nook, hallway | E27 × 1 |
| Medium | Φ50 cm / 19.7" | Dining table (2–4 persons), bedroom center | E27 × 1 |
| Large | Φ60 cm / 23.6" | Dining table (4–6 persons), living room accent | E27 × 1 |
Specifications
| Product Type | Pendant Light |
| Available Diameters | Φ40 cm (15.7") · Φ50 cm (19.7") · Φ60 cm (23.6") |
| Shade Material | Woven fabric with hand embroidery |
| Embroidery | Pink rose and green leaf motifs |
| Trim | Pearl bead row along scalloped lower hem |
| Rod / Canopy | Dark wood-finish (walnut tone) |
| Socket | E27 × 1 |
| Max Wattage | 40W |
| Bulb | Not included |
| Wiring | Hardwired |
| Voltage | AC 110–240V |
| Color | Off-white with pink/green embroidery (as shown) |
| Certification | Compatible with North America, Europe, Australia, Saudi Arabia |
| Use | Dry indoor locations only |
Installation Notes
- Hardwired ceiling installation — a licensed electrician is recommended.
- Compatible with a standard wall switch (not included). This pendant is not rated for Triac dimmer switches.
- E27 socket — insert bulb and twist clockwise to lock. Bulb not included.
- Hanging cord length is adjustable at the ceiling canopy before final installation.
- For indoor dry locations only. Not suitable for bathrooms, covered porches, or laundry rooms.
FAQ
Which size works over a standard dining table?
For a 4-person dining table (around 36–42" wide), the Φ50 cm (19.7") shade is a good match — the shade diameter stays within the table edge visually. For a 6-person table (48" or wider), the Φ60 cm (23.6") gives better coverage. The Φ40 cm works best as a single pendant over a small breakfast table or as a bedside pendant. Hang the bottom of the shade at 28–32" (70–80 cm) above the tabletop for even ambient light across the surface.
Will the pearl beads and embroidery hold up over time?
The embroidery thread is sewn through the fabric base and does not peel or flake. The pearl bead trim is hand-stitched with thread along the hem — avoid pulling on individual beads during installation or cleaning. For dusting, use a soft-bristle brush or low-pressure compressed air; do not wipe with a damp cloth, as moisture can loosen the embroidery backing or cause the fabric to spot.
What style of room does this pendant suit?
The combination of embroidered florals, pearl trim, and a dark wood rod reads well in cottagecore, farmhouse, and vintage-inspired bedrooms and dining rooms. It also works in transitional spaces where one decorative fabric element is introduced against neutral walls and furniture. It is not a fit for industrial, minimalist, or Scandinavian interiors.
Can I use this pendant in a bedroom as the primary light source?
Yes, in a standard bedroom (10–12 ft / 3–3.6 m square). Use the Φ50 or Φ60 cm size with a 10W warm white LED (E27, 2700–3000K, 800+ lumens) for general ambient light. For task lighting at a desk or vanity, supplement with a separate table lamp — a single pendant over the room center does not direct light to specific work areas.
Is this pendant certified for use in the United States?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia, and operates on AC 110–240V worldwide.
Mocht er sprake zijn van een probleem met de productkwaliteit of transportschade, dan bieden wij een gratis retour- en omruilservice aan. Zo garanderen wij een zorgeloze ervaring voor onze klanten.
Vakkerlight biedt een innovatieve 3D-lichtontwerpservice die uw verlichtingservaring naar een nieuw niveau tilt. Of u nu ontwerpt voor een woning, kantoor of commerciële ruimte, met deze service kunt u verlichtingsarmaturen visualiseren en afstemmen op uw specifieke behoeften in een realistische 3D-omgeving. Met deze service biedt Vakkerlight:
- Gepersonaliseerde verlichtingsoplossingen : U kunt samenwerken met hun ontwerpteam om op maat gemaakte verlichtingsopstellingen te creëren die precies passen bij de afmetingen en stijl van uw ruimte.
- Gedetailleerde visualisatie : Met de 3D-service kunt u zien hoe verschillende verlichtingsopties in uw kamer eruitzien. Zo kunt u vol vertrouwen uw keuzes maken voordat u met de installatie begint.
- Verbeterde klantenondersteuning : de ontwerpexperts van Vakkerlight begeleiden u door het proces en bieden suggesties en oplossingen op basis van uw voorkeuren en ruimtevereisten.
Dankzij deze service hoeft u niet langer te gokken op het gebied van verlichtingsontwerp, zodat u altijd de perfecte verlichtingsarmaturen voor uw huis of bedrijf kiest.
Voor meer informatie kunt u de officiële Vakkerlight 3D Lighting Design Service-pagina bezoeken.
Voor toegang tot 3D Max-bestanden of gedetailleerde productparameters kunt u contact opnemen met ons supportteam via info@Vakkerlight.com . Zij helpen u graag verder.
Welkom op de 3D-servicespagina van Vakkerlight! We zijn er trots op dat we uitgebreide ontwerpondersteuning bieden voor al uw verlichtingsbehoeften. Heeft u 3D-tekeningen, CAD-plannen of ruimtelijk ontwerp nodig? Ons ervaren supportteam staat voor u klaar.
