Scorza Ceramic Table Lamp
VKT07-26526-04
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- En stock
The Scorza is a sculptural ceramic table lamp with an upright column wrapped in deep vertical ridges, like torn bark or layered paper. A white glaze runs with gold-brown drips and soft green washes down the ribs, so each piece is a small study in kiln-fired color. An off-white fabric drum shade keeps the top calm. At 15″ wide and 24″ tall, it's an artful accent for a console, sideboard, or side table.
Vertical ridged column
Deep, torn-bark ridges run the height of the column for a tactile, sculptural surface.
Drip-and-wash glaze
White glaze with gold-brown drips and green washes flows down the ribs; each piece varies.
Single E27 light
One E27 socket — set the brightness and color with the bulb you choose.
Ridged ceramic column
15″ wide × 24″ tall. White glaze with gold-brown drip and green wash; each piece varies.
Drum shade
An off-white fabric drum shade gives a calm top that lets the ridged, glazed column stand out.
Default configuration
Pictured: white-glaze ridged ceramic column with gold-brown drip and green wash, gold-tone stem, and an off-white fabric drum shade. Takes one E27 bulb.
Bulb base
This lamp uses one E27 (large Edison screw) socket on 110–240V. US E26 bulbs thread into E27 and work on 120V, so standard US bulbs fit. Warm white (2700K) brings out the gold-brown glaze. Questions? Email us.
| Model | Width × Height | Body | Light |
|---|---|---|---|
| Scorza ceramic lamp | 15″ × 24″ | Ridged white, gold-brown & green glaze | 1 × E27 · LED-ready |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Ceramic, Fabric |
| Body finish | White glaze with gold-brown drip and green wash, vertical ridged texture |
| Shade finish | Off-white fabric drum shade |
| Light source | One E27 socket (large Edison screw) · LED-ready |
| Size | 15″ W × 24″ H (38 × 61 cm) |
| Voltage | AC 110–240V (universal) |
| Power | Table lamp with inline cord switch; plug-in |
| Suggested bulb | E27/E26 LED, warm white (2700K) recommended |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Plug-in table lamp — no hardwiring needed; seat the shade and plug it in.
- Place it on a sturdy, level surface; support the ceramic column from the bottom when moving.
- Use an E27 or E26 bulb rated for 110–240V; warm white (2700K) brings out the gold-brown glaze.
- Use an LED bulb so the fabric shade and ceramic body stay cool in use.
- Dust the ridged surface with a soft, dry brush, following the grooves; avoid wet wiping that can sit in the ridges.
- The glaze is poured and runs by hand, so the drip pattern and color vary piece to piece; the photograph shows a representative sample.
What bulb does the Scorza use, and will US bulbs fit?
It takes one E27 bulb — the large Edison screw. US E26 bulbs thread into E27 and run on 120V, so standard US bulbs work fine. A warm-white (2700K) LED brings out the gold-brown and green tones in the glaze.
Will the glaze pattern look exactly like the photo?
Close, but not identical. The glaze is poured and allowed to run down the ridges by hand, so the drip lines, gold-brown pooling, and green washes vary from piece to piece. That variation is part of the kiln-fired character — the photograph shows a representative sample.
How big is it, and where does it fit?
It's 15″ wide and 24″ tall — a tall, slim column lamp. It suits a console, a sideboard, or a side table, and its height makes it a good reading-height light beside a sofa or chair.
How do I clean the ridged base?
Dust it with a soft, dry brush, following the vertical grooves. Avoid soaking or harsh cleaners; the deep ridges can hold moisture and grit. A barely damp cloth on the smooth glazed areas is fine — keep the cord and socket area dry.
What is the warranty and support?
2-year warranty on the wiring and fittings; the ceramic is covered against manufacturing defects, with natural glaze and drip variation excluded. Bulbs are consumable and not covered, but they're inexpensive E27/E26 replacements. Email support replies within one business day.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
