Nomad Magnet Rechargeable Wall Lamp
VKW7-251214-01
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- إرجاع لمدة 60 يومًا على العناصر المؤهلة
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- مدفوعات آمنة ومأمونة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- In stock, ready to ship
A walnut-wood wall sconce that magnetically detaches into a portable handheld light. The lamp body lifts off the wall plate with a gentle pull — use it as a fixed sconce when mounted, or carry it as a wand for late-night hallways, closets, or bedside reading. Battery-powered with USB-C charging and 4-hour runtime. Touch sensor on the wood handle switches between three color temperatures (3000K / 4000K / 6000K) and dims by hold. No wiring, no electrician — mount the plate with screws or adhesive.
⚠ What this lamp is — and what it isn't
Ambient and accent light, not main illumination. The integrated 1W LED produces nightlight-to-low-ambient brightness — bright enough to navigate a dark hallway, find your way to the bathroom, or set evening mood, but not bright enough to read a book by alone.
For reading, pair it with a primary reading lamp. For mood lighting, ambient hallway use, or as a portable emergency light, this is its purpose.
Magnetic detach
Pull the wand off the wall plate at any time — carry it to bed, hallway, or closet. Snaps back into place with a satisfying click.
USB-C rechargeable
4-hour runtime per charge. Charges from any USB port — power bank, laptop, or wall adapter. Cable included.
3 color temperatures + dim
Tap the wood handle to cycle between 3000K warm, 4000K neutral, and 6000K cool. Hold to dim.
Touch control on the wood handle
Single tap = on/off. Double tap = cycle color temperature. Long press = dim from 100% down to 10%.
Mount: screw or adhesive
Wall plate mounts with 2 screws (drywall anchors included) or via 3M VHB adhesive strip (included). Adhesive holds 1+ lb.
| Dimensions | Ø1.0″ × 7.1″ tall (2.5 × 18 cm) · wall plate Ø3.5″ |
| Material | Walnut or light wood handle and wall plate · metal internal frame · frosted acrylic diffuser |
| Light source | Integrated LED — 1W, ~80 lumens |
| Color temperature | 3000K warm · 4000K neutral · 6000K cool — switchable via touch |
| Battery | Built-in rechargeable lithium-ion · ~4-hour runtime per charge |
| Charging | USB-C (cable included) — ~2.5 hours to full charge |
| Mounting | Screws (drywall anchors included) or 3M VHB adhesive (included) |
| Control | Touch sensor on the wood handle — tap, double-tap, hold |
| Body finish | Walnut wood (dark) or Light wood — choose at checkout |
| Certification | Certified for North America, EU, Australia, and Saudi Arabia |
| Warranty | 1 year on battery · 2 years on LED and fixture |
- Screw mount: Hold the wall plate where you want it, mark the two screw points with a pencil, drill pilot holes, install drywall anchors if needed, then screw the plate to the wall. Snap the lamp onto the magnet.
- Adhesive mount: Clean the wall with isopropyl alcohol, peel the backing from the 3M VHB strip on the plate, press firmly for 30 seconds. Wait 2 hours before attaching the lamp.
- Charge for 2.5 hours before first use. Subsequent charges take similar time. Keep charged for emergency-light reliability.
- Indoor dry locations only. Not for bathrooms with direct shower spray or outdoor use.
How long does the battery last and what's the charging time?
~4 hours of runtime at full brightness on a single charge. Dimming extends runtime significantly — at 25% brightness, expect 12+ hours. Charging from empty takes ~2.5 hours via USB-C from any standard USB-A or USB-C port (5V/1A or higher).
Will the adhesive hold over time?
The included 3M VHB adhesive holds 1+ lb of pull weight on clean, smooth surfaces (painted drywall, painted wood, tile). It will not hold on textured wallpaper, rough plaster, or unpainted brick. For long-term peace of mind on a critical mount, use the screw option instead.
Can the battery be replaced when it eventually wears out?
Lithium-ion batteries typically last 500–1000 full charge cycles (~3–5 years of daily use). The battery is not user-replaceable, but we offer a paid battery service after warranty — send the lamp back, we replace the cell and return it. Email info@vakkerlighting.com for details.
Is it bright enough for reading?
No — at 1W (~80 lumens) it's ambient/nightlight level, not task-bright. For comparison: a typical reading lamp is 8–15W LED (~400–800 lumens). Use the Nomad for mood lighting, nightstand accent, hallway navigation, and as a portable backup; pair with a primary reading lamp for reading.
What's the warranty?
1-year warranty on the battery (covers significant capacity loss in normal use); 2-year warranty on the LED, touch sensor, magnetic mount, and finish. Email info@vakkerlighting.com with photos for any warranty claim — replies within one business day.
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
