Woven Drum Globe Pendant Lamp
VKP1-26520-02
- In stock, ready to ship
A woven drum and globe pendant light in a mid-century modern profile — a wide woven-fabric drum shade above a soft opal-glass globe, finished with warm wood and metal accents and a pull-chain switch. The 17.7″ × 14.1″ drum spreads ambient light while the globe glows below. Integrated LED. For dining tables, kitchen islands, entryways, and reading corners.
Woven drum + opal globe
A wide woven-fabric drum diffuses ambient light; the opal-glass globe below adds a soft direct glow. Two light qualities in one fixture.
Wood & metal accents
Warm wood and metal hardware with a fabric-wrapped cord and a pull-chain switch — a mid-century detail, on or off at the fixture.
Integrated LED · dimmable
2700K warm white, dimmable on a compatible wall dimmer. AC 110–240V universal.
Custom shade tone
White woven drum with natural wood trim is standard. Oatmeal, charcoal, and natural-linen shade tones are available on request. Email us to confirm shade tone and wood finish before ordering.
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Woven fabric shade · opal glass globe · wood and metal hardware |
| Dimensions | 17.7″ × 14.1″ (Ø 45 × H 36 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired, ceiling-suspended on fabric-wrapped cord |
| Switch | Pull-chain on/off at the fixture |
| Moisture rating | IP20 — indoor, dry locations only (fabric and wood are not damp-rated) |
| Shade finish | White woven fabric with wood trim (oatmeal, charcoal, natural linen on request) |
| Control | Pull-chain switch; dimmable with a compatible wall dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired ceiling install — a licensed electrician is recommended.
- Over a dining table or island: mount the bottom of the globe 30–36″ above the surface. The fabric-wrapped cord is adjustable on installation.
- The pull-chain switches the fixture on and off at the shade; it can still be wired to a wall switch or dimmer for added control.
- Woven / fabric shades vary slightly in weave density, texture, and tone between pieces; this is characteristic of the material and not a defect. Spot-clean only — do not machine wash or soak.
- Real wood grain and tone vary by piece; the photograph shows a representative sample.
- Indoor dry location only (IP20). Do not install in bathrooms with shower exposure, above stoves, or any humid or outdoor location — fabric and wood absorb moisture.
How do I clean the woven fabric shade?
Spot-clean only — dust with a soft dry brush or vacuum on low with a brush attachment. Do not machine wash, soak, or use wet cleaners; water can stain or warp the woven fabric and the wood trim. Each shade varies slightly in weave density and tone, which is characteristic of woven material, not a defect.
How does the pull-chain switch work with a wall switch?
The pull-chain turns the fixture on and off right at the shade — handy where there's no nearby wall switch. You can still wire it to a wall switch or dimmer; leave the pull-chain in the "on" position and control it from the wall. Both work together.
Can I use this over a dining table or kitchen island?
Yes — the 17.7″ drum suits a small-to-medium table or a single island spot. Mount the bottom of the opal globe 30–36″ above the table or counter so the glow sits at eye-pleasing height without blocking sightlines. The fabric-wrapped cord adjusts to your ceiling height.
What's the LED lifespan, and what happens when it fails?
The integrated LED is rated over 30,000 hours — roughly 25 years at 3 hours of daily use. If it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable? Can I install it in a bathroom?
Dimmable when paired with a compatible wall dimmer (not included). Indoor dry locations only (IP20) — the woven fabric and wood absorb moisture, so it's not rated for bathrooms with shower exposure, above stoves, or outdoors. Dining rooms, kitchens away from the stove, entryways, and bedrooms are ideal.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size dining table or kitchen island does this fit?+
The 17.7″ drum suits small-to-medium dining tables and single kitchen island spots. Mount the globe bottom 30–36″ above the table or counter for optimal eye-level glow and task lighting.
Can I customize the shade color or wood finish?+
White woven drum with natural wood trim is standard. Oatmeal, charcoal, and natural-linen shade tones are available made to order. Email us to confirm your shade tone and wood finish before ordering.
How do I clean the woven fabric shade?+
Spot-clean only—dust with a soft dry brush or vacuum on low with a brush attachment. Do not machine wash, soak, or use wet cleaners; water can stain or warp the fabric and wood trim.
Can the pull-chain switch work with a wall dimmer?+
Yes. The pull-chain turns the fixture on and off at the shade. Leave it in the "on" position and control the fixture from a compatible wall dimmer or switch for added convenience—both work together.
What is the ceiling height requirement for installation?+
Hardwired installation is recommended with a licensed electrician. The fabric-wrapped cord is adjustable during installation. Mount the globe bottom 30–36″ above a dining table or island for proper sight line and function.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
