Travertine Double-Gourd Table Lamp
VKT1-2669-04
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- En stock
A sculptural table lamp built from a solid travertine double-gourd body topped with a wide cream linen coolie shade. The stone is natural — pitted, lightly veined, warm beige — and reads as quietly handsome stoneware against any wall. Compact at ∅ 11.8″ × H 12.6″ (∅ 30 × H 32 cm), with a single E27 socket and an in-line cord switch. Sized for a bedside, console, sideboard, or living-room side table.
Travertine double-gourd
A solid travertine body in a soft hourglass silhouette — natural stone with characteristic pits and veining.
Wide linen shade
A cream linen coolie shade sits wider than the body and diffuses an even, warm glow downward.
E27 + cord switch
Standard E27 socket on a plug-in cord with an in-line on/off switch — no installation needed.
Each piece of travertine is one of a kind
Travertine is a natural sedimentary stone with characteristic pitting (small voids) and soft veining. The pattern, depth of pits, and exact warm-beige tone vary from piece to piece — every lamp shares the same silhouette and material family, but no two are identical. These are signatures of the stone, not defects. The photo is representative; the lamp you receive will sit in the same family but show its own pattern.
Never use water, soap, or liquid cleaners
Travertine is porous and absorbs moisture, which can leave permanent staining, darken sections, or settle into the natural pits and discolor them. Dust the body regularly with a soft, dry brush (a clean paintbrush works well) or a dry microfiber cloth. For the linen shade, a soft lint roller lifts dust and pet hair without damaging the weave. Email us if a stain develops in normal use.
E27 bulb sold separately
The socket takes one standard E27 (Edison screw) bulb up to 40W — LED or Edison filament both work. The bulb is not included so you can match your color tone; warm-white at 2700–3000K, around 600–800 lumens, pairs best with the cream linen shade and warm stone.
Natural travertine body, warm-metal accents
A single tone shown — natural beige-cream travertine paired with a cream linen shade and warm-metal (brass-toned) accents at the finial and base ring. For project quantities or a custom shade fabric, email us before ordering.
Official dimension sheet. Click to enlarge.
Click to view full size ↗
| Dimensions | ∅ 11.8″ × H 12.6″ (∅ 30 × H 32 cm) |
| Material | Travertine (body), Metal hardware (finial, base ring), Linen (shade) |
| Color | Natural travertine beige-cream, cream linen shade, warm-metal accents |
| Light source | 1 × E27 socket · up to 40W · bulb sold separately |
| Switch | In-line cord on/off |
| Cord | Approx. 6 ft plug-in cord |
| Voltage | 120V (AC 110–240V global) |
| Placement | Free-standing, indoor dry locations |
| Suitable for | Bedside, console, sideboard, living-room side table, study |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface — solid travertine is heavy, so confirm the surface is rated for stone furniture weight (think: a small stoneware vase).
- Lift by the body, not by the shade — the shade is fabric over a wire frame and not load-bearing.
- Install one E27 bulb up to 40W, warm-white 2700–3000K LED recommended. Do not exceed the rated wattage.
- Plug into a standard outlet and use the in-line cord switch on the cable to turn on and off.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the travertine body with a soft, dry brush; dust the linen shade with a lint roller. Avoid water and liquid cleaners on the stone — see Care above.
Will the travertine look exactly like the photos?
No — and that's the nature of the material. Travertine is a natural sedimentary stone, and the depth of pitting, the vein pattern, and the exact warm-beige tone shift from piece to piece. Every lamp shares the same double-gourd silhouette and falls in the same color family, but no two are identical. If a perfectly uniform look matters, this stone may not be the right fit — email us with any questions before ordering.
What bulb does it use and is it included?
One standard E27 (Edison screw) bulb up to 40W. The bulb is not included. We recommend a warm-white LED at 2700–3000K, around 600–800 lumens, to match the warm tone of the stone and shade. A clear-glass Edison filament also looks at home with the linen shade.
How do I clean the lamp?
Never use water, soap, or liquid cleaners on the travertine. The stone is porous and absorbs moisture, which can leave permanent staining and discolor the natural pits. Dust the body regularly with a soft, dry brush — a clean paintbrush works well — or a dry microfiber cloth. For the linen shade, a soft lint roller lifts dust and pet hair without damaging the weave. Wipe the metal accents with a dry microfiber.
How heavy is it, and where can I place it?
Solid travertine is heavy — expect the lamp to be on the substantial side for its size, similar in weight to a small stoneware vase. Place it on a flat, stable surface (bedside, console, sideboard, side table, study desk) that's rated for stone furniture weight. Avoid floating shelves with low load ratings, and lift by the body rather than the shade. For project orders, request the exact weight before specifying installation.
What is the warranty?
The lamp carries a 2-year warranty against manufacturing defects in the wiring, socket, and switch. Email support with your order number if anything arrives damaged or fails in normal use. Natural stone variation (pits, veining, color shifts) is part of the material and not covered as a defect.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
Vakkerlight offers an innovative 3D Lighting Design Service that brings a new level of customization to your lighting experience. Whether you're designing for a home, office, or commercial space, this service allows you to visualize and tailor lighting fixtures to your specific needs in a realistic 3D environment. With this service, Vakkerlight provides:
- Personalized Lighting Solutions: You can work with their design team to create custom lighting arrangements that suit the exact dimensions and style of your space.
- Detailed Visualization: The 3D service enables you to see how different lighting options will look in your room, giving you confidence in your selections before installation.
- Enhanced Customer Support: Vakkerlight’s design experts guide you through the process, offering suggestions and solutions based on your preferences and space requirements.
This service helps take the guesswork out of lighting design, ensuring that you select the perfect lighting fixtures for your home or business.
For more information, you can visit the official Vakkerlight 3D Lighting Design Service page.
For access to 3D Max files or detailed product parameters, kindly reach out to our support team at info@Vakkerlight.com. They will be more than happy to assist you.
