Lattice Chandelier
WC200415-10
- In stock, ready to ship
Complete the collection
$239.00
A multi-tier wire-frame chandelier — black metal lines outline 3D polyhedral volumes stacked vertically, with cylindrical 3W LED terminals suspended below the lower tier. Designed for grand-scale architectural spaces: hotel lobbies, two-story atriums, restaurant entrances, gallery halls, and stairwells. Eight size and configuration combinations (20-, 43-, or 46-light arrangements at multiple drops up to 13 ft) to fit ceiling heights from 9 ft to 16+ ft.
⚠ Architectural installation — read before ordering
The Lattice Chandelier is a heavy, complex, large-format fixture. The 46-light configuration weighs ~51 lbs; the largest 43-light drop reaches 13 ft. To ensure safe installation and long-term stability:
- Reinforced ceiling support is mandatory — engineering review recommended for residential ceilings or any drop over 8 ft.
- Licensed electrician with experience in chandelier installation strongly recommended — typical install time is 4–6 hours with two installers.
- Confirm your ceiling height matches the drop height before ordering. The 13 ft drop requires a minimum 14 ft ceiling.
- Pre-installation: a scaffold or lift is typically required, not a step ladder.
Multi-tier polyhedral frame
Black metal lines outline stacked 3D volumes — reads as architectural drawing brought into the room.
3W integrated LED terminals
Each terminal is a sealed cylindrical LED — no bulbs to source. Total output scales with light count (60W / 129W / 138W).
8 size + drop combinations
20, 43, or 46 lights · drops from 43″ up to 13 ft · sized to fit standard rooms or grand atriums.
20-Light · for standard ceilings
| Variant | Diameter | Drop | Weight |
|---|---|---|---|
| Standard Drop | Ø47.2″ (120 cm) | 78.7″ (200 cm) | ~13 lbs (6 kg) |
| Long Drop | Ø47.2″ (120 cm) | 110″ (280 cm) | ~13 lbs (6 kg) |
43-Light · for atriums & tall stairwells
| Variant | Diameter | Drop | Weight |
|---|---|---|---|
| Compact 9.8 ft | Ø35.4″ (90 cm) | 118″ (300 cm) | ~42 lbs (19 kg) |
| Tall 13 ft | Ø35.4″ (90 cm) | 157.5″ (400 cm) | ~42 lbs (19 kg) |
| Wide-Tall 13 ft | Ø59″ (150 cm) | 157.5″ (400 cm) | ~42 lbs (19 kg) |
46-Light · for grand halls & commercial
| Variant | Diameter | Drop | Weight |
|---|---|---|---|
| Compact 3.6 ft | Ø35.4″ (90 cm) | 43.3″ (110 cm) | ~51 lbs (23 kg) |
| Medium 6.6 ft | Ø35.4″ (90 cm) | 78.7″ (200 cm) | ~51 lbs (23 kg) |
| Tall 9.2 ft | Ø35.4″ (90 cm) | 110.2″ (280 cm) | ~51 lbs (23 kg) |
| Material | Powder-coated metal wire frame · plastic LED terminal housings · clear acrylic lenses |
| Light source | Integrated 3W LED per terminal — no bulb replacement (G9 base internal) |
| Total wattage | 20-light: 60W · 43-light: 129W · 46-light: 138W |
| LED lifespan | 30,000+ hours |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired ceiling mount with reinforced canopy (Ø19.7″) |
| Frame finish | Matte black powder-coated |
| Cable length | 118″ (300 cm) on the longest standard variant; longer drops on request |
| Control | Compatible with TRIAC dimmers and standard wall switches (not included) |
| Certification | Certified for North America, EU, Australia, and Saudi Arabia |
| Warranty | 3 years on LED terminals · 2 years on frame and wiring |
- Required: reinforced ceiling support (concrete beam, steel structural member, or engineered residential reinforcement). Drywall alone will not hold the 46-light at 51 lbs over its lifetime.
- Required: licensed electrician + scaffold or lift. Two-installer minimum. Plan 4–6 hours for the install of medium and large configurations.
- The wire frame ships in segments and assembles on-site — a step-by-step installation guide is provided. Do not over-tighten frame joints.
- LED terminals are pre-wired into the frame and individually replaceable from below — failed LED terminals can be swapped without removing the whole chandelier.
- Indoor dry locations only — not suitable for outdoor or high-humidity environments.
Which configuration fits my space?
By ceiling height: 9 ft (residential dining) → 20-light Standard or 46-light Compact 3.6 ft. 11–12 ft (foyer, large dining) → 20-light Long Drop or 46-light Medium. 14+ ft atrium / two-story foyer → 43-light Tall or 46-light Tall. 16+ ft commercial atrium → 43-light Wide-Tall (Ø59″). Email info@vakkerlighting.com with your ceiling height and room photos for a recommendation.
Can I install this myself?
We strongly recommend against DIY for the 43-light and 46-light configurations — they weigh 42–51 lbs and require reinforced mounting, structural assessment, and 4–6 hours of two-person assembly with electrical work. The 20-light at 13 lbs is more manageable for a qualified DIYer with electrical experience, but a licensed electrician is still recommended. Improper installation risks fall hazards.
If an LED terminal fails, can I replace just that one?
Yes. Each cylindrical LED terminal connects to the frame via a sealed quick-disconnect — a failed terminal can be swapped from below without removing the chandelier. We keep replacement terminals in stock for 5 years after your order. Within 3-year LED warranty, replacements are free.
How bright is it total?
20-light: 60W LED ≈ 4,800 lumens (equivalent to ~480W incandescent). 43-light: 129W ≈ 10,300 lumens. 46-light: 138W ≈ 11,000 lumens. Use TRIAC dimmer to scale brightness for the room. At full output, the 46-light is appropriate for spaces of 600+ sq ft with 12+ ft ceilings.
What's the warranty?
3-year warranty on the LED terminals (rated 30,000+ hours, ~27 years at 3 hr/day). 2-year warranty on the wire frame, canopy, mounting hardware, and wiring. Replacement LED terminals available paid-service beyond warranty. Email info@vakkerlighting.com with photos for any claim.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What ceiling height do I need for the Lattice Chandelier?+
Minimum 9 ft for the 20-light models. The 43-light compact requires 9.8 ft; the tallest 43-light drop reaches 13 ft and needs 14+ ft ceiling. The 46-light models fit 9.2–10 ft ceilings. Confirm your exact ceiling height before ordering.
Is this chandelier suitable for a double-height foyer or stairwell?+
Yes. The 43-light configurations (drops up to 13 ft) and 46-light models excel in two-story atriums, grand stairwells, and hotel foyers. Choose your drop height to fit your ceiling and visual scale.
What installation support is required?+
Reinforced ceiling support (concrete beam or steel member) is mandatory—drywall alone cannot hold the weight long-term. A licensed electrician and two installers with a scaffold or lift are required. Plan 4–6 hours for installation.
Can I customize the size or drop height?+
Yes. The eight standard configurations offer drops from 3.6 ft to 13 ft. Vakkerlight's atelier also builds custom sizes and drop lengths on request—contact us for a bespoke quote.
How do I clean the LED lights?+
Each 3W LED terminal is sealed in a cylindrical housing with a clear acrylic lens. Gently dust the frame with a soft cloth; avoid water near electrical connections. No bulb replacement needed—30,000+ hour lifespan.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
