Elongated Alabaster Cluster Pendant Lamp
VKC-26518-01
- In stock, ready to ship
Complete the collection
$750.00
An elongated alabaster cluster pendant for tall stairwells, double-height foyers, and architectural entryways. Each 2.4″ × 9.8″ cylindrical column is hand-carved from natural alabaster on a black metal canopy with E26/E27 sockets — swap LED, Edison, or filament bulbs to tune the look. 3 to 15-light spiral drops, from 59″ up to 197″ — sized for rooms 55 to 300 sq ft.
Hand-carved alabaster columns
2.4″ × 9.8″ cylinders hand-carved from natural alabaster. Veining and translucency vary by piece.
3 to 15-light · up to 197″
System's longest drop. Sized for tall stairwells, double-height foyers, and 20+ ft entryways.
E26/E27 swappable bulbs
Standard medium base — change LED, Edison filament, or candle bulbs to tune the lighting look.
Light count
3, 5, 7, 9, 11, 13, or 15 columns. Match to room area below.
Drop length
59″ to 197″; shortenable on-site, longer on request.
Default configuration
Pictured: 15-column spiral, black metal canopy, 197″ drop. Other counts and lengths made to order.
Custom finish & drop
Canopy finishes: black (default), matte brass, brushed nickel, satin gold. Email us your ceiling height and stair run for a free layout mockup.
| Lights | Canopy Ø | Max drop | Room size |
|---|---|---|---|
| 3-light | 7.9″ | 59″ | 55–110 sq ft (5–10 m²) |
| 5-light | 11.8″ | 79″ | 85–130 sq ft (8–12 m²) |
| 7-light | 15.7″ | 98″ | 110–165 sq ft (10–15 m²) |
| 9-light | 19.7″ | 118″ | 130–215 sq ft (12–20 m²) |
| 11-light | 19.7″ | 138″ | 165–270 sq ft (15–25 m²) |
| 13-light | 23.6″ | 157″ | 215–300 sq ft (20–28 m²) |
| 15-light | 23.6″ | 197″ | 270–325 sq ft (25–30 m²) |
Click any diagram to enlarge.
| Material | Natural alabaster · brass socket · black metal canopy |
| Shade dimension | 2.4″ × 9.8″ (Ø 6 × H 25 cm) per column |
| Light source | E26/E27 medium base — LED, Edison, or candle bulb (one per column) |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired, round canopy |
| Moisture rating | IP20 — indoor, dry/damp locations only |
| Canopy finish | Black (default); matte brass, brushed nickel, satin gold on request |
| Shade finish | Natural white alabaster, hand-carved (veining varies) |
| Control | Compatible with common dimmers (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired ceiling install — a licensed electrician is recommended.
- Cables shorten on-site; for drops beyond the standard max, request extended cable when ordering.
- Sloped ceiling compatible up to 15°; steeper pitches ship with a free sloped-ceiling adapter — send pitch angle when ordering.
- For tall stairwells over 20 ft, the 13 or 15-light is sized to fall through the full well so columns read at every floor.
- We recommend a 4–6W E26/E27 LED in 2700K warm white per column to preserve the alabaster's natural color.
- Alabaster is a natural stone — small surface variations and color veining are inherent and not defects.
Which size fits my room? How do I match light count to room area?
Use the Sizes table above. Quick guide: dining room or open stair landing (55–130 sq ft) → 3 or 5-light; foyer or single-story stairwell (110–215 sq ft) → 7 or 9-light; double-height foyer or two-story stairwell (215+ sq ft) → 11, 13, or 15-light. Email us your ceiling height for a free layout.
Does this work with E26 bulbs in the US, or do I need E27?
E26 (North America) and E27 (EU/global) share the same physical thread — only voltage rating differs. The fixture is AC 110–240V universal, so a standard US E26 LED works as-is.
What bulb gives the best look?
Each column takes one E26/E27 bulb. A 4–6W LED in 2700K warm white preserves the alabaster's natural color (recommended for most rooms). Edison filament gives a vintage glow but reduces the alabaster's translucent effect. Avoid cool-white above 3000K — it washes out the stone tone.
How do I install this on a sloped or vaulted ceiling?
Standard canopies fit flat ceilings or pitches up to 15°. For steeper slopes — common over open stairwells — a sloped-ceiling adapter ships free. Send the pitch angle at order.
What's the warranty, and what happens if a bulb fails?
2-year warranty on fixture, canopy, and wiring. E26/E27 bulbs are standard replaceable parts from any hardware store. Email support replies within one business day at hello@vakkerlight.com.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
