Wood Pebble Table Lamp
VKT-26531-4
- In stock, ready to ship
This wooden pebble-stack table lamp pairs three solid-wood forms — a teardrop base, a flat disc, and a small sphere — with a pleated linen umbrella shade. Pick the small size for a nightstand or the large for a console or desk in a room of 54–86 sq ft. The integrated LED has three lighting modes you cycle through with a button on the cord.
Stacked wood forms
Teardrop base, flat disc, and small sphere in solid wood, stacked into a pebble-cairn silhouette.
Pleated linen shade
Soft umbrella-shape linen shade diffuses light into a wide, warm pool over the surface.
3-mode button switch
Press the in-line button on the cord to cycle through three lighting modes for different moods.
Integrated LED, no bulb to install
An LED is built into the fixture, so there is no separate bulb to buy or replace. Press the in-line cord button to cycle through three lighting modes; the last mode is remembered the next time you switch on.
Natural wood & linen, as shown
Ships in the natural wood and oatmeal linen finish pictured. Each wood form is solid timber, so grain pattern and tone vary slightly piece to piece. For project quantities, email us before ordering.
Official dimension sheet for each size. Click any diagram to enlarge.
Click any diagram to view full size ↗
| Dimensions | Small: ∅ 9.8″ shade x H 11.4″ (25 x 29 cm) Large: ∅ 12.6″ shade x H 14.2″ (32 x 36 cm) |
| Base diameter | Small: ∅ 3.5″ (9 cm) · Large: ∅ 5.1″ (13 cm) |
| Material | Solid Wood, Linen |
| Color | Natural wood, oatmeal linen |
| Light source | Integrated LED · 3 lighting modes · button-cycled |
| Voltage | 120V (AC 110–240V global) |
| Coverage | 54–86 sq ft (5–8 m²) |
| Switch | In-line cord button switch |
| Cord | Approx. 6 ft plug-in cord |
| Mount | Free-standing, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Place on a flat, stable surface; the wood base is solid and gives the lamp a low center of gravity.
- Plug into a standard outlet — no hardwiring or bulb installation needed.
- Press the in-line button to switch on; press again to cycle through the three lighting modes.
- Indoor dry locations only — not rated for bathrooms, porches, or outdoor use.
- Wipe the wood with a dry, soft cloth; avoid soaking or wet-wiping the linen shade.
- Keep liquids away from the wood; solid timber can stain or warp if water sits on the surface.
Which size should I pick?
Small (∅ 9.8″ shade x H 11.4″) suits a nightstand or compact bedside table. Large (∅ 12.6″ shade x H 14.2″) suits a console, desk, or wider sideboard. Both share the same wood-pebble base and pleated linen shade design.
How does the lighting work?
The LED is built into the fixture, so there is no separate bulb. Press the in-line button on the cord to turn the lamp on; each additional press cycles through three lighting modes. The lamp remembers the last mode the next time you switch on.
Is it dimmable?
The button cycles between fixed lighting modes rather than a continuous dimmer. We don't recommend pairing it with a wall dimmer, since the built-in driver is not designed for external dimming.
What does the wood look like?
Each lamp uses solid wood for the three stacked forms, so grain pattern and tone vary slightly piece to piece. The photo is representative rather than an exact match.
What is the warranty?
The lamp carries a 2-year warranty against manufacturing defects. Email support with your order number if anything arrives damaged or fails in normal use.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
Which size should I choose?+
Small (∅ 9.8″ shade × H 11.4″) fits nightstands and compact bedside tables. Large (∅ 12.6″ shade × H 14.2″) suits consoles, desks, or wider sideboards. Both have the same stacked wood-pebble design and pleated linen shade.
How does the lighting work?+
The integrated LED requires no bulb installation. Press the in-line cord button to turn on and cycle through three lighting modes. The lamp remembers your last mode when switched on again.
What does the wood look like?+
Each lamp uses solid wood for the three stacked forms, so grain pattern and tone vary slightly piece to piece. The product photo is representative, not an exact match. Every lamp is unique.
How do I clean and maintain it?+
Wipe the wood with a dry, soft cloth. Avoid soaking or wet-wiping the linen shade. Keep liquids away from the wood; solid timber can stain or warp if water sits on the surface.
How is it installed?+
No hardwiring needed. Place on a flat, stable surface—the solid wood base provides a low center of gravity. Plug into a standard outlet and press the in-line button to switch on. Approx. 6 ft cord.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
