Winged Sail Pendant Lamp
VKP7-26528-01
- In stock, ready to ship
This sculptural pendant light spans 29.5″ (75 cm) across a winged, sail-form fiberglass shade that curves like fabric caught in air. Its integrated 9W LED casts a soft warm glow for a dining table, kitchen island, or entryway of 54–108 sq ft. The matte-white shade reads as a quiet centerpiece in modern and minimalist rooms.
Winged sail form
A single curved fiberglass shade, 29.5″ wide and 21.7″ tall, with sweeping pointed tips.
Warm 9W LED
Integrated warm-white LED lights 54–108 sq ft (5–10 m²) for ambient and table use.
Adjustable cables
Three clear suspension cables set the drop height and keep the silhouette floating and airy.
Matte white, as shown
Ships in the white fiberglass finish pictured. Need a custom drop length for a project? Email us before ordering and we’ll confirm options and lead time.
Click any diagram to enlarge.
Click to enlarge ↗
| Dimensions | 29.5″W × 21.7″H (75 × 55 cm) |
| Material | Fiberglass, Metal |
| Color | White |
| Light source | Integrated LED · 9W · warm white |
| Voltage | 120V (AC 110–240V global) |
| Coverage | 54–108 sq ft (5–10 m²) |
| Suspension | Three adjustable cables |
| Mount | Ceiling canopy, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- Shorten the three suspension cables on site to set your drop height before final tightening.
- Center over a dining table or island, hung roughly 30–36″ above the surface.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- The fiberglass shade is molded; slight surface and edge variation between pieces is normal.
- LED is integrated; it is replaceable at authorized service rather than swapped at home.
Is this sculptural pendant light bright enough for a dining room?
The integrated 9W LED gives warm ambient and over-table light for 54–108 sq ft (5–10 m²). For a primary work kitchen, pair it with recessed or under-cabinet lighting.
What size space and table does the 29.5″ width suit?
At 29.5″ (75 cm) wide it centers well over a 4–6 seat table or a standard island. Leave at least 6″ of clearance on each side of the surface below.
Can I order a different finish or drop length?
This pendant ships in a single matte-white finish with adjustable cables you trim on site. For a fixed longer drop, email us before ordering to confirm options and lead time.
Can it mount on a sloped ceiling?
Yes. The three independent suspension cables adjust separately, so you can level the shade under a sloped or vaulted ceiling. Mount the canopy to a standard junction box.
What is the warranty and what happens if the LED fails?
The fixture carries a 2-year warranty. The LED is rated for about 30,000 hours and is replaceable at authorized service. Email support with your order number.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size dining table or island does this pendant fit?+
At 29.5″ (75 cm) wide, it centers well over a 4–6 seat table or standard island. Leave at least 6″ of clearance on each side of the surface below for safe, balanced appearance.
How bright is the 9W LED for dining or kitchen use?+
The integrated warm 9W LED provides ambient and over-table light for 54–108 sq ft (5–10 m²). For primary kitchen work lighting, pair it with recessed or under-cabinet fixtures.
Can I adjust the drop length or order a different finish?+
The three suspension cables trim on site for custom drop height. For a fixed longer drop or finish changes, email before ordering to confirm options and lead time in our atelier.
Will this work on a sloped or vaulted ceiling?+
Yes. The three independent suspension cables adjust separately, allowing you to level the shade under sloped ceilings. Mount the canopy to a standard junction box.
How do I clean the fiberglass shade?+
Dust gently with a soft, dry cloth. Slight surface and edge variation between molded fiberglass pieces is normal and part of the hand-built character.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
