Torch Cone Wall Sconce
VKW9-26531-01
- In stock, ready to ship
This torch-cone wall sconce flares open at the top and tapers to a slim point at the bottom, washing warm light up the wall and across the ceiling. It measures 9.1″ (23 cm) in diameter and 19.7″ (50 cm) tall, sized for a hallway, stairwell, entry, or bedside in rooms of 54–108 sq ft. Pick gold, chrome, or black to match your room.
Torch-cone form
Flared top tapers to a slim point at the bottom — a graphic vertical silhouette against any wall.
Up-wash light
Open top throws light upward and out, giving soft ambient glow without glare.
Three finishes
Pick gold for warm rooms, chrome for cool modern spaces, or black for a graphic minimalist look.
E14 bulb sold separately
Uses one standard E14 (small Edison screw) bulb up to 9W LED, warm-white recommended. Bulb is not included so you can match the color temperature you prefer.
Copper body, three finishes
Same copper-and-steel build and dimensions across all three SKUs — only the surface finish changes. Sold individually; order matching pairs for symmetric hallway or bedside layouts. For project quantities, email us.
Official dimension sheet (shared across all three finishes). Click to enlarge.
Click to view full size ↗
| Dimensions |
D 9.1″ x H 19.7″ (23 x 50 cm), Depth: 20cm |
| Material | Copper, Carbon Steel |
| Color | Gold, Chrome, or Black (select above) |
| Light source | 1 × E14 socket · up to 9W LED · bulb sold separately |
| Voltage | 120V (AC 110–240V global) |
| Coverage | 54–108 sq ft (5–10 m²) |
| Mount | Hardwired wall junction box, indoor dry locations |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard wall junction box; we recommend a licensed electrician.
- Mount roughly 60–66″ above the floor for hallway and stairwell use, or just above eye level beside a bed.
- Install one E14 bulb up to 9W LED, warm-white recommended. Do not exceed the listed wattage.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- The open top throws light upward; keep a few inches clear above the cone for the best effect.
- Wipe the finish with a dry, soft microfiber cloth; avoid abrasive cleaners that can scratch the surface.
Which finish should I pick for my room?
Gold suits warm rooms with cream walls, oak, or terracotta tones. Chrome works in cool modern spaces with gray or white walls. Black reads graphic and minimalist against light walls. All three share the same dimensions and bulb fitting.
What bulb does this sconce need and is it included?
The sconce uses one standard E14 (small Edison screw) bulb up to 9W LED, and the bulb is not included. We recommend a warm-white LED of around 400 lumens for soft ambient up-wash.
How high should I mount it?
For hallways and stairwells we suggest 60–66″ (152–168 cm) from the floor. Beside a bed, mount just above eye level when sitting up. Keep at least a few inches clear above the open top so the up-wash reads cleanly.
Is it dimmable?
The fixture itself has no built-in dimmer. Pair it with a dimmable E14 LED bulb and a compatible wall dimmer if you want dimming; confirm the dimmer is rated for LED loads.
What is the warranty?
The sconce carries a 2-year warranty against manufacturing defects. Email support with your order number if anything arrives damaged or fails in normal use.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size room is this sconce designed for?+
The Torch Cone is sized for rooms of 54–108 sq ft (5–10 m²)—hallways, stairwells, entries, and bedside spaces. At 9.1″ wide and 19.7″ tall, it creates a vertical silhouette without overwhelming smaller wall areas.
How high should I mount it on the wall?+
For hallways and stairwells, mount 60–66″ above the floor. Beside a bed, install just above eye level when sitting. Keep a few inches clear above the open top so light washes upward without obstruction.
Which finish should I choose?+
Gold suits warm rooms with cream, oak, or terracotta tones. Chrome works in cool modern spaces with gray or white walls. Black reads graphic and minimalist against light walls. All three finishes share identical dimensions and bulb fitting.
What bulb does it use and is one included?+
It uses one E14 (small Edison screw) bulb up to 9W LED, sold separately. We recommend a warm-white LED around 400 lumens for soft ambient up-wash. You choose the color temperature when you buy the bulb.
Can I install this myself or do I need an electrician?+
The sconce hardwires to a standard wall junction box. We recommend hiring a licensed electrician for safe installation. The open top must have a few inches of clearance above for optimal light distribution.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
