Louver Floor Lamp
VKF7-2669-04
- In stock, ready to ship
A mid-century floor lamp with a hand-riveted louvered steel shade that washes light upward and filters it softly down through the slats — ambient and glare-free at once. The white shade sits on a slim carbon-steel stem wrapped in hand-stitched leather, finished with a brass collar, over a weighted disc base. At 65″ tall it reads as a quiet sculptural piece beside a sofa, in a study, or in a bedroom reading corner.
Up & down light
The open shade throws light at the ceiling while the slats release a soft glow below — layered, low-glare ambient light.
Louvered steel shade
Concentric strips of white-painted steel, hand-riveted into a fanned cone that diffuses the bulbs evenly.
Leather-wrapped stem
Carbon-steel pole wrapped in hand-stitched leather with a brass neck collar and twin pull-chain switches.
Standard screw-base LED — bulbs replaceable
Uses two E27 screw-base LED bulbs (not included). Warm-white suits a cozy room; pair dimmable bulbs with a compatible plug-in dimmer to set the level. Runs on universal AC 110–240V; just confirm the bulb base for your region.
One finish: white shade · black stem · brass collar · 🔍 tap to enlarge
| Style | Mid-century / modern / minimalist |
| Material | Carbon steel + metal hardware + hand-stitched leather |
| Finish | Dust-free baked enamel (powder-coat) |
| Shade width | 18.9″ (480 mm) |
| Height | 65″ (1650 mm) |
| Bulbs | 2 × E27 screw-base LED, not included |
| Switch | Twin pull-chain switches |
| Voltage | AC 110–240V (universal) |
| Certification | North America Listed · CE · SAA · SASO · KC |
| Best for | Living room, study / home office, bedroom |
- Thread the stem sections into the weighted base, then seat the louvered shade onto the neck collar.
- Fit two E27 LED bulbs before standing the lamp upright; operate each light with its own pull-chain.
- Place it in a corner or beside a sofa where the upward light can reach the ceiling for the best ambient effect.
- Dust the shade slats with a soft dry brush; wipe the leather and base with a barely-damp cloth.
What bulbs does this mid-century floor lamp use?
Two E27 screw-base LED bulbs (not included), one per pull-chain. Warm-white looks best in living and bedroom spaces; for adjustable brightness use dimmable bulbs with a compatible dimmer. It runs on universal AC 110–240V; just confirm the bulb base for your region.
How does the louvered shade light a room?
The open top sends light up to the ceiling for soft ambient fill, while the slatted sides release a gentle downward glow — layered, low-glare light rather than one harsh beam.
How tall is it and where does it fit?
It stands 65″ (1650 mm) tall with an 18.9″ (480 mm) shade. It suits a living room beside a sofa, a study or home office, or a bedroom reading corner, and works well in a corner.
Is assembly required?
Light assembly only: join the stem to the weighted base, seat the shade on the neck collar, and fit the two bulbs. No special tools are needed and it takes a few minutes.
What is the stem made of, and how do I care for it?
A carbon-steel pole wrapped in hand-stitched leather with a brass neck collar, on a baked-enamel disc base. Dust the slats with a soft brush and wipe the leather with a barely-damp cloth. Questions? Email support@vakkerlight.com.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What bulbs does this floor lamp use?+
Two E27 screw-base LED bulbs (not included), one per pull-chain. Warm-white is best for cozy rooms; pair dimmable bulbs with a compatible dimmer to adjust brightness.
How does the louvered shade work?+
Light travels upward through the open top to wash the ceiling, while the hand-riveted steel slats filter a soft glow downward—layered, low-glare ambient light without harsh shadows.
Is assembly required?+
Minimal: thread the stem into the weighted base, seat the shade on the neck collar, and fit the two bulbs. No tools needed; takes just a few minutes.
How tall is it and where should I place it?+
65″ tall with an 18.9″ shade diameter. It suits a living room beside a sofa, a study or home office, or a bedroom reading corner; place it where upward light can reach the ceiling.
How do I clean and maintain the stem and shade?+
Dust the louvered slats with a soft dry brush. Wipe the leather-wrapped stem and base with a barely-damp cloth. Avoid harsh solvents on the hand-stitched leather.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
