Flora Pleated Fabric Semi-Flush Mount
VKC5-26621-01
- In stock, ready to ship
Flora Pleated Fabric Semi-Flush Mount — Scalloped Shade, Metal Base, 3 Sizes
A scalloped fabric shade — pleated in vertical panels that gather into a petal-like silhouette — mounts close to the ceiling on a metal base with a dark brown finish. The beige fabric diffuses E27 bulb light upward and outward, spreading ambient light across the ceiling rather than casting a direct downward beam. Available in three diameters (40, 50, and 60 cm / 15.7, 19.7, and 23.6 inches), the Flora works as a semi-flush ceiling light in bedrooms, dining rooms, and living rooms where clearance between ceiling and fixture matters.
Key Features
Pleated Fabric Shade
Vertical pleats gather into a scalloped petal outline; diffuses light through the fabric wall.
Semi-Flush Mount
Sits close to the ceiling — suitable for rooms with 8–9 ft ceilings where pendant drop isn't ideal.
Metal Base
Dark brown-finished metal canopy and bottom finial; no painted plastic components.
3 Sizes Available
Ø40 × H23 / Ø50 × H29 / Ø60 × H34 cm — select by room size and ceiling clearance requirement.
E27 Socket
Standard E27 base; accepts a wide range of bulb shapes. Bulb not included.
Upward + Ambient Light
Fabric walls diffuse light in all directions; no harsh downward-only beam from this fixture.
About the Fabric Shade
The pleated fabric panels are hand-stitched onto the frame. Minor variation in pleat spacing and shade roundness is normal for this construction method. Do not use steam or an iron directly on the fabric — a soft brush or compressed air removes dust without distorting the pleats.
Size Guide
| Size | Diameter | Height | Recommended Room |
|---|---|---|---|
| Small | Ø40 cm / 15.7 in | H 23 cm / 9.1 in | Bedroom, home office, hallway (up to ~120 sq ft) |
| Medium | Ø50 cm / 19.7 in | H 29 cm / 11.4 in | Master bedroom, dining room (120–200 sq ft) |
| Large | Ø60 cm / 23.6 in | H 34 cm / 13.4 in | Living room, open dining area (200–300 sq ft) |
🔍 Tap any image to enlarge
× × ×
Choosing a Size
A common guideline: add the room's length and width in feet, and the result in inches is a reasonable shade diameter. For example, a 12 × 14 ft bedroom (26 ft total) suggests a 24–26-inch / 60–65 cm shade as a ceiling fixture.
Bulb
E27 · 1 bulb · Bulb not included
Standard E27 medium base. The fabric shade fully encloses the bulb, so bulb shape is not visible from below. A round or globe-form bulb fits the interior geometry cleanly.
Specifications
| Product Type | Semi-Flush Mount Ceiling Light |
| Available Sizes | Ø40 × H23 cm / 15.7 × 9.1 in · Ø50 × H29 cm / 19.7 × 11.4 in · Ø60 × H34 cm / 23.6 × 13.4 in |
| Shade Material | Pleated fabric (beige) |
| Base / Canopy | Metal, dark brown finish |
| Color | Beige shade / dark brown metal base (as shown) |
| Socket | E27 × 1 |
| Bulb | Not included |
| Wiring | Hardwired |
| Voltage | AC 110–240V |
| Use | Indoor, dry locations only |
| Certification | Compatible with North America, Europe, Saudi Arabia, Australia |
Installation Notes
- Hardwired ceiling installation — a licensed electrician is recommended.
- Compatible with standard wall switch (not included). Dimming possible with a dimmable E27 LED bulb and compatible wall dimmer; no built-in dimmer on this fixture.
- E27 socket — twist-lock bulb replacement, no tools required. Bulb not included.
- For indoor, dry locations only. Not suitable for bathrooms or damp areas.
- Sloped ceiling compatibility depends on canopy hardware; contact us before ordering if your ceiling pitch exceeds 15°.
FAQ
How much clearance does this fixture need below the ceiling?
Which size should I pick for my bedroom or dining room?
Can I use a dimmable bulb with this fixture?
How do I clean the pleated fabric shade?
Is the Flora certified for use in North America and Europe?
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What ceiling height does this fixture work with?+
The Flora semi-flush mount sits close to the ceiling—ideal for rooms with 8–9 ft ceilings. As a semi-flush design, it requires minimal clearance between the canopy and ceiling, making it suitable where pendant drop isn't practical.
Which size should I choose for my room?+
Add your room's length and width in feet; the total in inches suggests a good shade diameter. Ø40 cm / 15.7″ × H 23 cm / 9.1″ for bedrooms up to ~120 sq ft; Ø50 cm / 19.7″ × H 29 cm / 11.4″ for 120–200 sq ft; Ø60 cm / 23.6″ × H 34 cm / 13.4″ for 200–300 sq ft living areas.
How do I clean the pleated fabric shade?+
Use a soft brush or compressed air to remove dust without distorting the pleats. Do not use steam or an iron directly on the fabric. Minor variation in pleat spacing is normal due to hand-stitching.
What bulb does this fixture use, and can I dim it?+
Standard E27 socket; bulb not included. Dimming is possible with a dimmable E27 LED bulb and a compatible wall dimmer. Bulb replacement is tool-free—simply twist-lock the new bulb into place.
Can this fixture be customized or made to order?+
The Flora is hand-built in our Vakkerlight atelier as a made-to-order piece. Contact us about custom sizing or other modifications beyond the three standard diameters.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
