Fabric Cone Black Fringe Pendant Lamp
VKP9-2676-01
- In stock, ready to ship
A faceted fabric cone topped with structured off-white panels, finished at the base with a generous ring of black fringe. The fabric top is cut into multiple flat facets that meet at folded seams — the seam lines create a geometric, almost origami-like profile when viewed from the side. The black fringe below is in direct tonal contrast to the off-white fabric above — the two-tone combination gives this pendant a stronger graphic presence than most natural-fiber shades. Black cord and canopy keep the hardware recessive. Three sizes, one 3000K E27 bulb included.
1 × E27 3000K LED bulb included
A 3000K warm white E27 LED bulb ships with every pendant. The E27 socket accepts any standard medium screw base replacement. For dimming, swap in a Triac-dimmable E27 LED and a compatible dimmer switch.
Hardwired ceiling install · adjustable cord
Hardwires to a ceiling junction box — not plug-in. Cord length is adjustable at the canopy during installation. A licensed electrician is recommended. Turn off power at the breaker before installation.
Faceted fabric cone
Multiple flat fabric panels joined at folded seams — the faceted geometry creates a structured, angular cone profile that reads more contemporary than a smooth curved shade.
Black fringe contrast
A dense ring of black fringe at the base edge — in direct tonal contrast to the off-white fabric cone above. The black-and-white combination gives this pendant a stronger graphic statement than single-tone fiber shades.
Black hardware · 3 sizes
Black cord and canopy — recessive against most ceiling colors. Three sizes: Ø40×H20 cm, Ø50×H25 cm, Ø60×H30 cm, each maintaining the same cone-to-fringe proportion.
Small — Ø40 × H20 cm
Diameter: 40 cm (15.7″) · Height: 20 cm (7.9″) · Cord: adjustable · Black canopy
Suits: 10–13 m² · bedside · reading nook · 2-seat dining. Pairs well as a duo.
| Size | Diameter × Height | Room | Best for |
|---|---|---|---|
| Small | Ø40 × H20 cm 15.7″ × 7.9″ |
~10–13 m² | Bedside, reading nook, 2-seat dining, pair |
| Medium | Ø50 × H25 cm 19.7″ × 9.8″ |
~13–16 m² | 2–4 seat dining, bedroom, living room |
| Large | Ø60 × H30 cm 23.6″ × 11.8″ |
~16–18 m² | 4–6 seat dining, open-plan living, statement |
All three sizes share the same faceted cone + black fringe proportion. Height grows with diameter. Cord length is adjustable at the black canopy. For dining, hang bottom of shade 70–80 cm above the table surface.
Ø40×H20 · Ø50×H25 · Ø60×H30 cm
🔍 Tap to enlarge
| Light source | E27 medium screw base · 1 × 3000K LED bulb included · replaceable |
| Sizes | Ø40×H20 cm · Ø50×H25 cm · Ø60×H30 cm |
| Canopy | Black finish · confirm diameter with supplier |
| Cord | Black · adjustable at canopy · confirm max length with supplier |
| Color | Off-white structured fabric (cone) + black fringe (base) — single colorway |
| Material | Structured fabric (cone) · fringe (base) · metal hardware |
| Room coverage | 10–18 m² — varies by size |
| Mounting | Hardwired ceiling pendant |
| IP rating | IP20 — indoor, dry locations only |
| Dimmable | Yes — with Triac-dimmable E27 LED and compatible dimmer |
| Best for | Dining room · bedroom · living room · Contemporary · Eclectic · Maximalist · Dark-palette · Transitional interiors |
Default configuration
Select size at checkout. One 3000K E27 LED bulb included. Single colorway: off-white + black. Email us for trade pricing.
- Turn off power at the breaker. A licensed electrician is recommended for hardwired ceiling connections. Adjust cord at the black canopy to set drop height — for dining, bottom of shade 70–80 cm above the table surface.
- Screw the included 3000K E27 bulb into the socket. Do not exceed the socket's rated wattage. Replace with any E27 medium base bulb of your choice.
- For dimming: the included bulb may not be dimmable — check packaging. Replace with a Triac-dimmable E27 LED and pair with a compatible dimmer switch.
- Fabric cone: dust with a soft brush or low-suction vacuum. Do not wet-clean or steam — moisture can warp the structured fabric facets. Keep away from cooking steam and high-humidity zones.
- Black fringe: lint roller or soft brush to remove dust. Do not wet-clean. Separate tangled strands by hand. Fringe will sway gently in airflow — normal. Keep away from direct fan drafts if a static hang is preferred.
- Black canopy and cord: dry cloth only.
Does a bulb come included?
Yes — one 3000K warm white E27 LED bulb ships in the box, ready to install. The E27 socket accepts any standard medium screw base replacement when needed.
Which size should I choose?
The Small (Ø40 cm) suits a bedside, reading nook, or 2-seat table — it pairs well as a duo. The Medium (Ø50 cm) anchors a 2–4 seat dining table or bedroom. The Large (Ø60 cm) is the statement size for a 4–6 seat dining room or open-plan living area. All three maintain the same cone-to-fringe proportion, so the graphic black-and-white contrast reads consistently across sizes.
What is the "faceted" fabric cone?
The cone shade is made from multiple flat fabric panels joined at folded seams — rather than a smooth curved cone, the surface is made up of flat facets with visible seam lines between them. From the side, this gives the shade a geometric, origami-like profile. From below, it reads as a structured cone with the seam pattern visible when lit from inside. The faceted construction also means the shade holds its shape more rigidly than a draped fabric shade.
Is it dimmable?
The included bulb may not be dimmable — check its packaging. For reliable dimming, replace with a Triac-dimmable E27 LED and a compatible leading- or trailing-edge dimmer switch.
What interior styles does this suit?
The black-and-white two-tone combination is more graphic than most natural-fiber pendants — it suits contemporary, eclectic, maximalist, and dark-palette interiors where a strong visual statement is wanted. The off-white fabric cone also reads in transitional and French-country rooms when paired with other black accent elements. It does not suit purely warm-natural, Japandi-minimalist, or all-neutral rooms where the black fringe contrast would read as too bold.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size should I choose for a dining table?+
Small (15.7″ diameter) suits 2-seat dining; Medium (19.7″) works for 2–4 seats; Large (23.6″) fits 4–6 seat tables. Hang the shade 70–80 cm above the table surface.
Can I use this pendant in a bedroom or reading nook?+
Yes. The Small size (15.7″ × 7.9″) is ideal for bedside and reading nooks. All three sizes work in bedrooms and living rooms up to 18 m².
Is this pendant dimmable?+
The pendant accepts any E27 bulb. For dimming, use a Triac-dimmable E27 LED paired with a compatible dimmer switch—a build-to-order option from our atelier.
How do I install this pendant?+
It hardwires to a ceiling junction box with an adjustable black cord. A licensed electrician is recommended. Turn off power at the breaker before installation.
Can the cord length be adjusted?+
Yes. Cord length is adjustable at the black canopy during installation, allowing you to customize the drop height for your space.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
