Antique Brass Double Cone Wall Sconce
VKW4-26531-01
- In stock, ready to ship
The Antique Brass Double Cone Wall Sconce is a mid-century wall light with flared white glass shades on a tapered antique brass body. Choose the single-cone uplight (9W LED) or the double-cone up-and-down version (2×9W LED). 15.7″ tall, 5.9″ off the wall — for hallways, stairwells, bedrooms, and entryways of 54–108 sq ft (5–10 m²).
Flared glass shades
White trumpet-shaped glass shades diffuse a soft, warm glow with no harsh glare.
Up & down lighting
The double-cone version casts light up and down for layered wall-wash; the single-cone aims upward.
Integrated LED
9W LED modules (one or two) built in — no bulb to buy, no replacement to plan for.
Default configuration
Antique brass finish, white flared glass shades, integrated LED. Pick the single-cone (9W) or double-cone (2×9W) version at checkout. Hardwired wall mount with round 4″ canopy.
Custom & contract requests
Need matched sconces for a hotel corridor, restaurant, or multi-room project? Email us with your quantity and lead-time needs for a quote.
| Version | Light direction | Power | Best for |
|---|---|---|---|
| Single cone | Uplight (one shade) | 9W LED | Bedrooms, accent walls, headboards |
| Double cone | Up & down (two shades) | 2 × 9W LED (18W total) | Hallways, stairwells, entryways |
Click any diagram to enlarge.
| Material | Metal, Glass |
| Color | Antique brass, white glass |
| Version | Single cone or double cone (choose at checkout) |
| Light source | Integrated LED · 9W (single) or 2 × 9W (double) |
| Voltage | AC 110–240V (universal) |
| Total height | H 40cm / H 15.7″ |
| Shade width | 12cm / 4.7″ |
| Wall projection | 15cm / 5.9″ from wall |
| Room size | ~54–108 sq ft (5–10 m²) per sconce |
| Mounting | Hardwired wall mount |
| Moisture rating | IP20 — indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired install — a licensed electrician is recommended.
- Mounts to a standard US wall junction box with the included round canopy.
- Standard mount: 60–66″ from floor to center in hallways and entries; 30–36″ above the mattress over a bed.
- Install in pairs flanking a doorway, mirror, or bed for symmetrical light.
- LEDs are factory-sealed and replaceable at authorized service if they ever reach end of life.
- Slight variation in the antique brass finish across batches is normal — the finish is hand-applied with a weathered look, not a defect.
Should I pick the single cone or the double cone?
Single cone for accent uplighting and bedside reading. Double cone for layered up-and-down wash — ideal in hallways and stairwells. Double cone gives twice the output (18W vs 9W).
How high should I mount the sconce?
60–66″ from floor to center in hallways and entries (eye level for most adults). Above a bed, 30–36″ above the mattress top works for reading and ambient light.
Does it need a bulb? Can I replace the LED?
No bulb to buy — the LED is built in. If it ever reaches end of life, the module is replaceable at authorized service. The fixture is rated for 30,000+ hours of use.
Will the antique brass finish match my other fixtures?
A warm, hand-applied antique brass — slight tone variation is part of the look. Pairs well with other warm-brass or aged-metal fixtures rather than polished brass or chrome.
Is there a warranty?
A 2-year warranty on wiring, the LED module, and finish. If anything arrives damaged or stops working, email support with photos and your order number.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
Should I choose the single-cone or double-cone version?+
Single cone (9W) directs light upward for accent and bedside reading. Double cone (18W) casts light up and down for layered wall-wash, ideal in hallways and stairwells where you need brightness in both directions.
What height should I mount the sconce?+
In hallways and entries, mount 60–66″ from floor to center (roughly eye level). Above a bed, mount 30–36″ above the mattress top for reading and ambient light. Install pairs flanking doorways or beds for symmetry.
Do I need to buy bulbs or replace the LED?+
No bulb to buy—the LED is integrated and built to last 30,000+ hours. If end-of-life ever occurs, the module is replaceable through authorized service. No maintenance required.
Will the antique brass finish match my other fixtures?+
The hand-applied antique brass has intentional tone variation—a weathered look, not a defect. It pairs well with warm-brass or aged-metal fixtures; polished brass and chrome will appear noticeably different.
Can I customize this sconce or order multiple for a project?+
Yes. For hotel corridors, restaurants, or multi-room projects, email us with your quantity and timeline for a custom quote. Our atelier builds to order and accommodates contract requests.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
