Little Eliah Cone Table Lamp
202205090943-1
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
The Little Eliah Cone Table Lamp is a postmodern color-block table lamp — a slim metal stem rises from a contrasting base to a crisp white cone shade with a vibrant painted interior, completed by a small decorative ball on the base. Available in 2 bold color combinations (Red + Green or Blue + Yellow). Single E26 (US/CA) or E27 (EU/AU) socket with inline on/off switch and a 59" cord with plug — no hardwiring needed. For bedside tables, nightstands, console tables, home office desks, dressing rooms, children's rooms, boutique retail displays, and Memphis, postmodern, eclectic, mid-century revival, or playful modern minimalist interiors.
Little Eliah Cone Table Lamp · color-block stem and base · cone shade with vibrant interior
▶ Watch — Little Eliah Cone Table Lamp in styled interior settings ▶ Watch — Color detail and shade interior close-upWhite Cone, Vibrant Inside
Matte-white exterior, surprise color interior — bold from below, neutral from above.
Color-Block Stem + Base
Contrasting stem and base with a tiny decorative ball — postmodern joy in a tabletop.
Plug-In Tabletop
No hardwiring — plug into any standard outlet and use the inline switch.
🔍 ∅16.5" × H21.6" dimensions reference · tap to enlarge
Sized for accent tables, nightstands, and console tops
At ∅16.5" wide × 21.6" tall, the Little Eliah Cone Table Lamp suits accent and bedside tables 18-30 inches wide. Place 2-4 inches in from the table edge to avoid accidental knocks. The shade is a wide cone — leave at least 4 inches of clearance from walls so the shade does not touch wallpaper or art. For pairs flanking a bed, position the bottom of the shade roughly 24-30 inches above the mattress (about eye-level when sitting up reading).
Indoor dry location only
The Little Eliah Cone Table Lamp is rated for indoor dry locations. Powder-coated metal and the plug-in cord are not designed for damp or wet environments. Do not place on a bathroom vanity counter close to a sink or shower, on a covered porch, screened patio, or outdoor area. Keep at least 3 ft from steam sources (kettles, dishwashers, showers, humidifiers).
Pair the right bulb — Warm LED for the cone-interior glow
E26 (US/CA) or E27 (EU/AU) base, single socket. Recommended: Warm White 2700K LED, A19 or globe shape, 5-9W (40-60W equivalent). The painted shade interior reflects warm tones downward — Warm White brings out the interior color richly. Avoid cool white (5000K+) which washes out the painted interior. Max 60W incandescent equivalent / 9W LED per socket.
Cord routing and stability
The 59-inch cord exits the back of the base. Route the cord toward the wall outlet behind or beside the table — do not run it across walkways where it can be tripped over. The base is weighted but the lamp is fairly tall (21.6"), so place it on a stable flat surface away from high-traffic edges. For households with young children or pets, consider securing the lamp with a removable furniture-grade tether or museum putty under the base.
| Materials | Powder-coated steel · aluminum alloy · powder-coated metal cone shade |
| Light source | LED or Edison bulb (sold separately) |
| Base type | E26 (US/CA) · E27 (EU/AU), single socket |
| Recommended bulb | Warm White 2700K LED · A19 or globe shape · 5-9W |
| Max wattage | 60W incandescent / 9W LED |
| Voltage | AC 110-240V |
| Color combinations | Red + Green · Blue + Yellow (pick one at order) |
| Shade finish | Matte white exterior · painted vibrant interior (matches color combo) |
| Dimensions | ∅16.5" × H21.6" (∅42 × H55 cm) |
| Cord | 59" (150 cm) cord with plug |
| Mounting | Tabletop · plug-in (no hardwiring) |
| Control | Inline on/off switch on cord |
| Environment | Indoor · dry locations only · keep 3 ft from steam sources |
| Certification | Compliant with North America, EU, Australia, Saudi Arabia standards |
- Plug-in — no electrician needed; use a standard wall outlet.
- Place 2-4" from table edge on a stable flat surface 18-30" wide.
- Warm White 2700K LED 5-9W (max 60W incandescent equivalent).
- Route cord along the wall side; secure with putty if kids or pets are present.
Red + Green or Blue + Yellow — which color combination should I pick?
Red + Green: warm bold contrast. Best with terracotta, walnut wood floors, jewel-tone upholstery, traditional carpets, eclectic mixed interiors, holiday rooms, libraries. Reads dramatic and cozy. Blue + Yellow: bright Mediterranean contrast. Best with cool grey walls, marble surfaces, navy upholstery, coastal rooms, Scandinavian Memphis interiors. Reads cheerful and graphic. Both ship with a matte-white cone exterior — the surprise color is on the interior of the shade, visible only when looking up from below or seeing the warm glow on a table surface.
Where should I place the Little Eliah Cone Table Lamp?
Designed for tabletops — bedside table or nightstand (flanking a bed in a pair, eye-level cone bottom 24-30" above mattress), console table (entry hall accent), home office desk (offset from your laptop), dressing-room vanity, children's room (out of reach of toddlers due to height), boutique retail display, restaurant or hotel reception accent. Needs at least 18-30 inches of table width and 4 inches of clearance from walls. Single accent or pairs flanking a focal point both work well.
What bulb does the Little Eliah Cone Table Lamp use, and is it dimmable?
E26 (US/CA) or E27 (EU/AU) base, single socket. Recommended: Warm White 2700K LED, A19 or globe (G25) shape, 5-9W (40-60W incandescent equivalent). Warm White reflects warmly off the painted shade interior, intensifying the color glow on the tabletop. Avoid cool white (5000K+) — it washes out the painted shade interior. Max wattage: 60W incandescent equivalent / 9W LED. Bulb sold separately. Dimming: the inline on/off switch on the cord is not a dimmer — for dimming, plug into a smart outlet or replace with a dimmable LED + smart bulb controller.
Does the Little Eliah Cone Table Lamp need to be hardwired?
No — the Little Eliah Cone Table Lamp is a plug-in tabletop fixture. The 59" cord ends in a standard wall plug (Type B for US/CA, Type C/F for EU). Simply plug into any wall outlet and use the inline on/off switch on the cord. No electrician needed. Voltage is 110-240V universal. For tabletops far from outlets, use a quality extension cord with grounding (do not exceed 25 ft total cord length to avoid voltage drop). The cord exits the back of the base — route it discreetly along the wall side.
Can I place the Little Eliah Cone Table Lamp in a bathroom or outdoors?
No. The Little Eliah Cone Table Lamp is rated for indoor dry locations only. Powder-coated metal and the plug-in cord are not designed for damp or wet environments. Do not place on a bathroom vanity counter close to a sink or shower, on a covered porch, screened patio, by an open window in the rain, or in any outdoor area. Keep at least 3 ft from steam sources (kettles, dishwashers, showers, humidifiers). For damp or outdoor spaces, choose a UL-rated wet- or damp-location table lamp.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
