Cone Swing Arm Wall Sconce
VKW07-26611-03
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
Cone Swing-Arm Wall Sconce — Articulated Directional Illumination
A swing-arm wall sconce with a small cone shade and a discreet pull-cord switch—finished in glossy painted iron across the shade, arm, and slim baseplate. The articulated arm extends in two segments (30 + 20 cm), so the cone can sit close against the wall or reach about 20″ (50 cm) into the room as a directional reading light beside a bed, sofa, or armchair. ∅ 25 cm shade, hardwired to a standard junction box behind a 6 × 25 cm rectangular baseplate. Available in two colors: Pomegranate Red or Tangerine Orange. One E27 socket; bulb sold separately.
Two-Segment Swing Arm
30 + 20 cm articulated arm—fold flat against the wall or swing out to about 50 cm reach.
Cone Shade + Pull Cord
Compact cone with a thin pull-cord switch hanging from the side—no wall switch required.
Painted Iron, Two Colors
Glossy enamel finish across shade, arm, and baseplate in Pomegranate Red or Tangerine Orange.
Available in two distinct finishes: Pomegranate Red (deep wine/burgundy tone) and Tangerine Orange (vibrant warm citrus). Swatches are digital approximations; actual painted iron may shift slightly with room lighting.
E27 Bulb Sold Separately
The cone shade conceals one standard E27 socket. The bulb is not included so you can match your preferred color temperature. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens for a reading-light feel, in a standard A-shape bulb up to 40W equivalent.
Two-Segment Articulated Arm Mechanics
The arm is built from two segments: a 30 cm inner section hinged at the baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, holding its position through calibrated friction. Adjust gently by hand without forcing past the natural travel range.
Integrated Pull-Cord Switch
A thin braided pull-cord hangs from the side of the cone shade. A short tug toggles power directly at the fixture, making it ideal beside a bed, in a reading corner, or in spaces lacking convenient wall switch wiring.
Enamel Painted Iron Finish & Custom Orders
Each sconce is welded from iron tubing and sheet, then finished in durable glossy enamel paint. For project quantities or a bespoke color request, please contact our team before ordering.
| Component | Metric Dimensions | Imperial Dimensions |
|---|---|---|
| Cone Shade | Dia 25cm × H 19cm | ∅ 9.8″ × H 7.5″ |
| Wall Baseplate | W 6cm × L 25cm | W 2.4″ × L 9.8″ |
| Articulated Arm | L 30cm + 20cm (~50cm reach) | L 11.8″ + 7.9″ (~19.7″ reach) |
| Shade Dimensions | ∅ 9.8″ × H 7.5″ (∅ 25 × H 19 cm) |
| Baseplate | W 2.4″ × L 9.8″ (W 6 × L 25 cm) |
| Arm | L 11.8″ + 7.9″ (L 30 + 20 cm) · Two-segment articulated · ~50 cm max reach |
| Colors | Pomegranate Red · Tangerine Orange |
| Material | Welded iron tubing and sheet · Glossy enamel paint |
| Light Source | 1 × E27 socket · Bulb sold separately · Max 40W equivalent |
| Switch | Pull-cord on shade · No wall switch required |
| Voltage | AC 110–240V (120V compatible) |
| Mounting | Hardwired to standard wall junction box · Indoor dry locations |
| Suitable Spaces | Bedside, reading nook, hallway, beside sofa or armchair, guest room |
| Certification | Compatible with North America, CE, SAA, SASO, KC Certification |
- Hardwired to a standard wall junction box behind the baseplate—we recommend a licensed electrician for installation.
- Plan mount height so the pull-cord hangs within easy reach when seated or standing (typically 130–150 cm from floor).
- Allow clearance for the swing arm: approx. 50 cm outward reach plus the cone's 25 cm diameter.
- Unpack carefully—lift the sconce by the baseplate or arm hinge, avoiding pulling by the shade or pull-cord.
- Install one E27 bulb up to 40W equivalent—a warm-white LED at 2700–3000K, 400–600 lumens suits reading use.
- Indoor dry locations only—not rated for bathrooms with steam exposure, covered porches, or outdoor use.
- Adjust the two arm segments by hand; joints hold position through friction without forcing past natural travel range.
- Wipe the painted finish with a soft, dry cloth. The pull-cord can be wiped with a slightly damp cloth and dried promptly.
How does the swing arm work?
The arm has two segments: a 30 cm inner section hinged at the wall baseplate, and a 20 cm outer section hinged where the cone attaches. Each joint pivots independently, allowing you to fold the arm flat against the wall, swing it out fully to ~50 cm reach, or position it at any angle. The hinges maintain position by calibrated friction.
What bulb does it use and is it included?
The fixture uses one standard E27 socket. The bulb is sold separately so you can select your desired warmth. We recommend a warm-white LED at 2700–3000K, around 400–600 lumens, in a standard A-shape or globe filament bulb up to 40W equivalent.
How does the pull-cord switch work?
A thin braided cord hangs from the side of the cone shade. A short tug turns the lamp on; another tug turns it off. It operates independently of any wall switch, ideal for bedside or reading chair installations without nearby pre-wired switches.
What colors are available and how do they differ?
This fixture is offered in two distinct enamel finishes: Pomegranate Red (a deep burgundy, wine-toned red that pairs beautifully with warm wood, terracotta, and leather) and Tangerine Orange (a vibrant, warm citrus tone that provides an energetic accent).
Can the sconce be installed in a bathroom or outdoors?
No. The fixture is rated strictly for indoor dry locations. It is not suitable for bathrooms with shower steam, covered outdoor porches, or damp exterior walls.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
