Acoustic Layered Pendant Lamp

No — the bulb is not included. The pendant uses a standard E26 (North America) or E27 (Europe and worldwide) screw base, so any bulb up to 15 W from your local hardware store will fit. We recommend a warm-white LED in the 2700–4000 K range. The gap between the layered fins makes a globe or ST64 Edison filament bulb visible from below — a warm, textural detail worth considering.

The Oval (D480 × H580 mm) suits high-ceilinged rooms (3 m / 10 ft+) and narrow dining tables — its vertical mass fills ceiling height without overwhelming a small footprint. The Round (D400 × H400 mm) is square in proportion and works over round or square tables for 2–4 people; the bulb is fully visible through the cage. The Disc (D660 × H380 mm) is the widest of the three — it anchors a 6–8 seat dining table or a kitchen island without dropping too low. All three can be mixed in a multi-pendant run if you want varied heights.

Yes. PET acoustic felt absorbs mid- and high-frequency sound waves rather than reflecting them. Positioning pendants at ceiling level targets the primary echo zone in open-plan dining rooms, offices with hard floors, and loft apartments with bare concrete. The effect is noticeable but not equivalent to full acoustic wall treatment — for more coverage, pair with additional wall or ceiling panels.

Graphite works in almost any palette — it reads near-black in low light and dark charcoal in daylight. Sky Blue and Sage Green suit biophilic, Japandi, or Scandinavian interiors. Burgundy and Walnut pull warm tones from exposed wood, brick, and terracotta. Amber is the boldest choice — a single Disc in Amber over a neutral oak table makes it the focal point of the room. All six colorways are available in all three shapes, so a multi-pendant run can be color-matched.

Dimming depends on the bulb, not the fixture. Choose any Triac-dimmable E26 or E27 LED bulb and pair with a compatible leading- or trailing-edge (Triac) wall dimmer. A non-dimmable bulb on a dimmer circuit will flicker or hum. Check the bulb packaging for dimmer compatibility before purchasing.

PET felt fins: use a soft brush vacuum attachment on low suction, or roll with a lint roller. Do not wet-clean, steam, or use any solvent-based product — moisture deforms the felt fibers. Aluminum hardware: wipe with a lightly damp cloth and dry immediately to prevent water marks.

Yes. This is a hardwired pendant that connects directly to the ceiling junction box. In the US, EU, and Australia, ceiling wiring work must be carried out by a licensed electrician. The canopy, ceiling plate, and hardware are included; the electrician handles the final wiring connections at the box.