Pivot Hardwired Swing-Arm Wall Lamp
VKW7-26831-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
The Pivot Hardwired Swing-Arm Wall Lamp is a double-jointed articulated task light in baked-enamel aviation aluminum, with smooth, electroplated pivot joints and a switch built right into the lamp head. This version wires directly into a wall junction box rather than plugging into an outlet, for a clean, cord-free installation.
Double-jointed swing arm
An articulated, double-jointed arm lets you angle and extend the lamp head to where you need it.
Aviation aluminum, baked enamel
Cast in aviation-grade aluminum with a baked-enamel finish on the shade, and smooth, electroplated joints.
Built-in switch, hardwired
The switch is built into the lamp head, and the fixture wires directly into a wall junction box.
Standard Arm
Upper arm 34 cm, lower arm 25 cm; overall reach approx. 25–31 cm tall when extended. Shown in our Red and Yellow reference photos.
Extended Arm
Upper arm 45 cm, lower arm 36 cm; overall reach approx. 36–42 cm tall when extended. Shown in our Blue reference photo.
The source material shows a "Standard Arm" dimension diagram for the Red and Yellow photos, and a separate, larger "Extended Arm" diagram for the Blue photo — but doesn't explicitly confirm whether both arm lengths are offered in all three colors, or whether each color ships in only the size shown. Please confirm the actual size/color combinations available with your supplier before publishing.
Add product dimension image here.
| Standard Arm | |
| Upper Arm | 34 cm / 13.4″ |
| Lower Arm | 25 cm / 9.8″ |
| Height Range | 25–31 cm / 9.8″–12.2″ |
| Extended Arm | |
| Upper Arm | 45 cm / 17.7″ |
| Lower Arm | 36 cm / 14.2″ |
| Height Range | 36–42 cm / 14.2″–16.5″ |
| Shared | |
| Shade Width | 20 cm / 7.9″ |
| Wall Plate | Φ12 cm / Φ4.7″ |
| Product Name | Pivot Hardwired Swing-Arm Wall Lamp |
| Product Type | Wall Lamp (Articulated, Hardwired) |
| Material | Aviation-Grade Aluminum, Baked Enamel Finish |
| Color Options | Blue, Yellow, Red |
| Size Options | Standard Arm, Extended Arm — see note above on color/size combinations |
| Bulb Socket | E27 |
| Wattage | 12W (bulb inclusion not confirmed — see caveat below) |
| Switch | Built into the lamp head |
| Wiring | Hardwired |
| Mounting | Wall Mounted, articulated swing arm |
| Suitable Spaces | Bedside, study |
| Environment | Indoor |
This hardwired version was requested as a variant of our plug-in Pivot Swing-Arm Wall Lamp — the original supplier photos and dimension diagrams only showed a plug-in cord and plug, with no hardwired configuration pictured or confirmed. Please verify with your supplier that a genuine hardwired version exists (including its wiring/junction-box requirements and any certification) before publishing this page. The source listing also gives bulb socket (E27) and wattage (12W) but doesn't state whether a bulb is included, nor does it give a color temperature. These have been left out rather than guessed.
- Requires a wall junction box; wire directly into your home's electrical system per local electrical code.
- This fixture must be installed by a licensed electrician.
- Mount to a secure wall surface using hardware suitable for the fixture weight.
- Wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth; avoid abrasive scrubbers or harsh chemical cleaners.
- Allow the bulb to cool before handling, and switch off power at the breaker before cleaning or relamping.
- Intended for indoor, dry use.
What colors and sizes are available?
Three colors — Blue, Yellow, and Red — and two arm lengths, Standard and Extended. Please contact us to confirm which arm lengths are available in which colors.
Does it come with a bulb, and what socket does it use?
It uses a standard E27 socket rated for a 12W bulb. Bulb inclusion wasn't confirmed in the listing we received — please contact us before ordering.
Is it hardwired or plug-in?
It's hardwired — the fixture wires directly into a wall junction box rather than plugging into an outlet, and the switch is built into the lamp head. Installation should be done by a licensed electrician.
How is it mounted?
It mounts to the wall via a round base plate, with a double-jointed articulated arm that swings and extends. We recommend secure wall-anchor hardware suited to the fixture weight.
How do I clean it?
Switch off power at the breaker first, then wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth. Avoid abrasive scrubbers or harsh chemical cleaners.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
