Dual Disc Travertine Wall Sconce
VKW9-26521-01
- Standaard verzending naar de Verenigde Staten
- Levenslange garantie op alle producten
- 60 dagen retour- en omruilbeleid
- 24/7 Aftersales-ondersteuning, 24 uur per dag, 7 dagen per week
- Gepersonaliseerde aanpassing beschikbaar
- Veilige en beveiligde betalingen
- Compatibel met Noord-Amerika, Saoedi-Arabië, Europa en Australië-certificering
- Op voorraad, klaar voor verzending
A dual disc travertine wall sconce — two ⌀11″ natural-travertine discs on a slim black iron stem, each backlit so a warm halo glows around the stone. The vertical composition draws the eye up a wall. Available in 31.5″ and 39.4″ heights, E27 base, bulb included. For stairwells, hallways, bedsides, and entryway accent walls.
Two backlit stone discs
A pair of ⌀11″ travertine discs glow with a soft halo around each edge — light washes the wall behind, not your eyes.
Natural travertine
Hand-cut stone with open pores and color banding — every disc reads slightly differently.
Tall vertical stem
A slim black iron stem links the discs in a 31.5″ or 39.4″ column. E27 base, bulb included.
Height
31.5″ or 39.4″ overall — the disc diameter stays ⌀11″; the stem between them lengthens.
Orientation
Mounts vertically as shown; the central wall plate keeps the stem flush.
About natural travertine
Each disc is hand-cut from natural travertine. Open pores, surface pitting, and color banding vary piece to piece — these are core characteristics of the stone, not defects or damage. The two discs on one sconce will not match exactly, and that is expected with natural stone.
| Size | Disc Ø | Overall height | Metric (Ø × H) |
|---|---|---|---|
| Standard | 11″ | 31.5″ | 28 × 80 cm |
| Tall | 11″ | 39.4″ | 28 × 100 cm |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Travertine, Iron |
| Body finish | Matte black iron stem and wall plate |
| Shade finish | Natural travertine |
| Sizes | Standard 31.5″ · Tall 39.4″ (disc ⌀11″) — see Sizes table |
| Light source | E27 base × 1 — bulb included; 2700K warm-white E27 LED recommended; dimmable |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, vertical orientation |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. The central wall plate covers a standard junction box; mount the stem vertical and check with a level.
- The discs sit slightly off the wall so light can wash behind them as a halo — keep the back faces clear of the wall per the included spacers.
- The E27 bulb is included and replaceable; a 2700K warm-white E27 LED gives the warmest halo.
- Dimmable with a compatible wall dimmer (not included).
- Travertine is a porous natural stone — open pores, surface pitting, and color banding are core characteristics of the material, not flaws or damage. The two discs will not match exactly.
- Indoor dry locations only (IP20). Keep clear of direct water — travertine is porous and absorbs moisture.
How does the light work — do the stone discs light up?
The discs are backlit: the bulb sits behind the stone and throws a soft halo of light around each disc onto the wall, rather than shining through the solid travertine. The effect is an ambient glow that outlines the two discs — indirect and easy on the eyes, good for hallways and bedsides.
Which height should I choose?
Both have ⌀11″ discs; only the stem length differs. The 31.5″ standard suits most walls, bedsides, and hallways. The 39.4″ tall version suits stairwells, double-height entries, or a tall blank wall where you want the vertical line to carry. Email us your wall height if you're unsure.
The two discs don't match — is that a defect?
No — each disc is hand-cut from natural travertine, so the two on one sconce will differ in vein pattern, pore distribution, and tone. Open pores and color banding are core characteristics of the stone, not flaws. The mismatch is the signature of a natural-stone fixture.
What bulb does it use, is it included, and is it dimmable?
One E27 bulb (standard medium base), included. A 2700K warm-white E27 LED gives the warmest halo. It's replaceable. Dimmable when paired with a dimmable bulb and a compatible wall dimmer (sold separately).
Can I install it in a bathroom, and what's the warranty?
Only away from water — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. Travertine is porous and absorbs moisture. 2-year warranty on the fixture and wiring; E27 bulbs are standard replaceable parts. Email support for help — we reply within one business day.
Mocht er sprake zijn van een probleem met de productkwaliteit of transportschade, dan bieden wij een gratis retour- en omruilservice aan. Zo garanderen wij een zorgeloze ervaring voor onze klanten.
Vakkerlight biedt een innovatieve 3D-lichtontwerpservice die uw verlichtingservaring naar een nieuw niveau tilt. Of u nu ontwerpt voor een woning, kantoor of commerciële ruimte, met deze service kunt u verlichtingsarmaturen visualiseren en afstemmen op uw specifieke behoeften in een realistische 3D-omgeving. Met deze service biedt Vakkerlight:
- Gepersonaliseerde verlichtingsoplossingen : U kunt samenwerken met hun ontwerpteam om op maat gemaakte verlichtingsopstellingen te creëren die precies passen bij de afmetingen en stijl van uw ruimte.
- Gedetailleerde visualisatie : Met de 3D-service kunt u zien hoe verschillende verlichtingsopties in uw kamer eruitzien. Zo kunt u vol vertrouwen uw keuzes maken voordat u met de installatie begint.
- Verbeterde klantenondersteuning : de ontwerpexperts van Vakkerlight begeleiden u door het proces en bieden suggesties en oplossingen op basis van uw voorkeuren en ruimtevereisten.
Dankzij deze service hoeft u niet langer te gokken op het gebied van verlichtingsontwerp, zodat u altijd de perfecte verlichtingsarmaturen voor uw huis of bedrijf kiest.
Voor meer informatie kunt u de officiële Vakkerlight 3D Lighting Design Service-pagina bezoeken.
Voor toegang tot 3D Max-bestanden of gedetailleerde productparameters kunt u contact opnemen met ons supportteam via info@Vakkerlight.com . Zij helpen u graag verder.
