Tiered Alabaster Wall Sconce
VKW4-26612-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Available in Region-Specific Electrical Options
- In magazzino, pronto per la spedizione
A sculptural wall sconce — five horizontal alabaster panels, staggered like a slow geometric ladder, lit from within by a warm-white LED bulb. The natural stone glows softly between the stainless-steel supports; the form reads as a quiet wall sculpture, lit or unlit. 10.2″ × 13.8″ × 8.7″ projection (26 × 35 × 22 cm). For foyers, gallery walls, stairwells, and statement bedrooms.
Five tiered panels
Hand-shaped horizontal alabaster panels stagger out from the wall in a quiet geometric rhythm.
Natural stone glow
A warm-white LED bulb behind the panels lights the natural alabaster on both faces.
Stainless-steel support
Slim stainless-steel armature holds the panels in place; the support disappears against the glow.
| Material | Alabaster, Stainless Steel |
| Panels | Five hand-shaped horizontal alabaster panels, staggered |
| Support | Stainless-steel armature |
| Light source | One E27 medium-base bulb · max 40W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Size (W × H × Proj.) | 10.2″ × 13.8″ × 8.7″ (26 × 35 × 22 cm) |
| Power | AC 110–240V; hardwired over a standard junction box |
| Control | Wall switch on/off |
| Use | IP20 indoor and dry locations only |
Natural alabaster — each piece is one of a kind
Each panel is hand-shaped from natural alabaster, with its own veining, color shifts, and small inclusions. No two sconces will look identical — variation from photos is expected, not a defect. Email us for photos of in-stock pieces before ordering.
Deep projection — measure before ordering
This sconce projects 8.7″ (22 cm) from the wall, which is deeper than a typical sconce. Plan for clearance in hallways, beside doorways, and around traffic paths — install where it can sit unobstructed.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended.
- Use one E27 medium-base bulb, max 40W (or LED equivalent). Use LED only — incandescent and halogen bulbs run hot enough to discolor natural alabaster over time. Bulb not included.
- Controlled by a standard wall switch (on/off). Not designed for external dimmer compatibility — pair with a standard switched circuit.
- Indoor and dry locations only (IP20). Safe in damp vanity areas away from shower spray; not rated for wet zones. Confirm your local code before bathroom installation.
- Handle the alabaster panels gently during install — natural stone can chip if knocked. Once mounted, the sconce is stable; the risk is during unpacking and hanging.
- Dust the panels with a soft, dry cloth. No water or solvents on the stone; the stainless-steel armature can be wiped with a barely-damp microfiber.
Is the alabaster real natural stone?
Yes — each panel is hand-shaped from a single piece of natural alabaster. The stone's translucency lets a warm-white LED bulb glow through both faces. Veining, color, and small inclusions are unique to each piece.
Where does it fit best?
Foyers, gallery walls, stairwells, statement bedrooms, dining-room accents. Best on a flat unbroken wall where the staggered panels read against open background. The 8.7″ projection means it isn't a low-profile sconce — give it space.
What bulb does it take, and how bright is it?
One E27 medium-base bulb, max 40W (or LED equivalent), not included. Use a warm-white LED only — incandescent and halogen run hot enough to discolor natural alabaster over time. The light is soft and ambient through the stone — accent and mood light, not whole-room lighting. Pair with ceiling or table lights for general illumination.
Is it dimmable?
The sconce is controlled by a standard wall switch (on/off). It's not designed for external dimmer compatibility — using a dimmer on the wall circuit may cause flicker or shorten the LED life. Use a standard switched circuit.
What's the warranty?
2-year warranty on wiring, socket, and finish. Natural stone veining and inclusions are not defects; chips from drops or knocks during install or use, and alabaster discoloration from using an over-spec or non-LED bulb, are not covered. Email support with photos within 7 days of delivery for any transit damage.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
