Halo di Pietra Alabaster Chandelier
VKC12-25726-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Available in Region-Specific Electrical Options
- In magazzino, pronto per la spedizione
Halo di Pietra Chandelier
The Halo di Pietra is a seamless torus of natural Spanish alabaster — 100% imported from Spain — a full ring of solid stone, 8 cm thick in cross-section, with no metal band interrupting it: the entire halo glows. The integrated warm 3000K LED lights the ring from within, so the veining floats across the stone like clouds circling, and on fine cables from a brushed brass canopy the halo appears to hover. Seven ring diameters from Ø 39 to Ø 99 cm hang alone over dining tables and living rooms, and two- and three-ring clusters — staggered from one shared canopy — fill stairwells, foyers, and double-height great rooms. A Triac-dimmable version is also offered.
Halo di Pietra — lit detail · Watch on YouTube ↗
Solid Spanish Alabaster
A seamless stone torus, 100% imported from Spain — the whole ring glows.
Floating Halo Form
Ø 8 cm stone cross-section on near-invisible cables — no metal band.
Single or Cluster
Seven sizes Ø 39–99 cm, plus 2- and 3-ring staggered clusters.
Natural Spanish Stone — Each Piece Is Unique
Every halo is carved from natural alabaster quarried in Spain. Veining and tone vary from ring to ring, so your chandelier will differ from the photos shown — this variation is the character of genuine stone, not a defect.
Default — Warm 3000K
Fixed warm light with a common on/off wall switch. Not dimmable.
Triac Dimmable — Warm 3000K
Dims smoothly from full brightness to a low glow with a Triac wall dimmer.
For the dimmable version, pair with a Triac dimmer switch (shop on Amazon ↗) for the best results. Dimmer not included.
| Configuration | Dimensions | Weight |
|---|---|---|
| Single — Ø 39 | Ø 39 × H 8 cm / Ø 15.4″ | 9 kg / 19.8 lbs |
| Single — Ø 49 | Ø 49 × H 8 cm / Ø 19.3″ | 12 kg / 26.5 lbs |
| Single — Ø 59 | Ø 59 × H 8 cm / Ø 23.2″ | 15 kg / 33 lbs |
| Single — Ø 69 | Ø 69 × H 8 cm / Ø 27.2″ | 18 kg / 39.7 lbs |
| Single — Ø 79 | Ø 79 × H 8 cm / Ø 31.1″ | 20 kg / 44 lbs |
| Single — Ø 89 | Ø 89 × H 8 cm / Ø 35.0″ | 23 kg / 50.7 lbs |
| Single — Ø 99 | Ø 99 × H 8 cm / Ø 38.9″ | 26 kg / 57.3 lbs |
| 2-Ring Cluster | Ø 69 + 79 cm / Ø 27.2″ + 31.1″ | — |
| 3-Ring Cluster | Ø 59 + 69 + 79 cm / Ø 23.2″ + 27.2″ + 31.1″ | — |
| 3-Ring Cluster (Grand) | Ø 79 + 89 + 99 cm / Ø 31.1″ + 35.0″ + 38.9″ | — |
Single Ring
2-Ring Cluster
3-Ring Cluster
🔍 Tap any diagram to enlarge
Staircase, Foyer & Double-Height Projects
The 2- and 3-ring clusters stagger from one shared canopy, each halo at its own height — made for stairwells, entries, and great rooms. Send us your ceiling height and room dimensions, and we will confirm the right cluster and drop lengths within 24 hours.
| Configurations | Single Ø 39 / 49 / 59 / 69 / 79 / 89 / 99 · 2-ring Ø 69+79 · 3-ring Ø 59+69+79 or Ø 79+89+99 |
| Stone cross-section | Ø 8 cm / 3.1″ solid alabaster torus |
| Weight | 9–26 kg by single ring size (see table above) |
| Material | Natural Spanish alabaster (100% imported from Spain), metal |
| Light source | Integrated LED — replaceable; if the LED is ever damaged, contact us for a replacement module |
| Color temperature | Warm light 3000K — choose the Triac-dimmable version for dimming |
| Voltage | AC 110–240V |
| Mounting | Ceiling, hardwired — multi-cable suspension from a brushed brass canopy |
| Hanging cables | 59″ adjustable, can be lengthened as required |
| Finish | Gold canopy and fittings, white alabaster ring |
| Control | Common wall switch (default) or Triac dimmer (dimmable version) — not included |
| Environment | Indoor use |
- Hardwired ceiling installation — a licensed electrician is recommended, and professional installation is strongly advised for the large rings and clusters.
- Solid stone weight runs from 9 kg (Ø 39) to 26 kg (Ø 99) per ring — anchor the canopy to a junction box or ceiling structure rated well above the total load, never drywall alone.
- Cables adjust independently so each halo hangs perfectly level; they can be lengthened as required before shipping for stairwells and tall ceilings.
- Integrated LED — no bulb installation needed. If the LED module is ever damaged, contact us for a replacement.
- For the dimmable version, install a compatible Triac wall dimmer (not included).
- Handle each ring with two people and avoid impact — natural stone can chip.
- For indoor use only. Not suitable for bathrooms or damp locations.
Where does the alabaster come from?
Each halo is carved from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass.
Which size or cluster should I choose?
Over a table, the ring should be roughly half to two-thirds of the table's width: Ø 39–49 suit breakfast nooks and bedrooms, Ø 59–69 round tables for 4–6, and Ø 79–99 dining tables for 6–8 and living rooms. The 2-ring cluster (Ø 69+79) fills entries and living rooms with taller ceilings; the 3-ring clusters are scaled for stairwells and double-height foyers. Send us your dimensions and we will recommend within 24 hours.
Is the Halo di Pietra dimmable?
Two versions are offered. The default is a fixed warm 3000K light on a common on/off wall switch. The Triac-dimmable version dims smoothly when paired with a compatible Triac wall dimmer — see the dimmer link above. Choose the version at checkout; contact us if unsure and we will reply within 24 hours.
Can I replace the LED?
Yes — the LED module is replaceable. Nothing needs changing in normal use, since quality LEDs of this type are rated for tens of thousands of hours; and if the LED is ever damaged, contact us and we will arrange a replacement module — we reply within 24 hours.
Does the halo need special ceiling support?
Yes — each ring is solid stone, from 9 kg (Ø 39) up to 26 kg (Ø 99), and clusters carry two or three rings from one canopy. The canopy must be anchored to a junction box or ceiling structure rated well above the total load, never drywall alone. For large rings and clusters we strongly recommend professional installation.
Can I use it in a bathroom?
No — this fixture is designed for dry indoor locations only and should not be installed in bathrooms, above sinks, or in covered outdoor areas where it could be exposed to moisture.
Why does my chandelier look different from the product photos?
The halo is natural Spanish stone, so veining and tone vary from ring to ring — across a full torus of stone, that drift is the design. No two Halo di Pietra chandeliers are exactly alike; this is the character of real alabaster, not a defect.
Is the Halo di Pietra certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
