Alabaster Cascade Tiered Chandelier
VKC-231213-001
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Available in Region-Specific Electrical Options
- In magazzino, pronto per la spedizione
Alabaster Cascade Tiered Chandelier
The Cascade Chandelier surrounds its G9 lamps with two stepped tiers of raw-edged panels in natural Spanish alabaster — 100% imported from Spain — the outer ring hanging long, the inner ring dropping lower, so the light falls through layer after layer of stone like water over a weir. Each panel is pinned at the top with a polished brass fitting, its lower edge left rough from the cut. Seven configurations — six round drums from Ø 57 to Ø 120 cm and a linear L 106 cm version — carry 12 to 32 bulbs, scaling from dining rooms and living rooms to hotel lobbies and grand entries, all on adjustable cables with a 150 cm overall drop.
Spanish Alabaster Panels
Raw-edged stone slats, 100% imported from Spain — each cut unique.
Two Cascading Tiers
The inner ring drops below the outer — light falls stone over stone.
G9 Replaceable Bulbs
12 to 32 compact G9 bases by size — easy to source and change.
Natural Spanish Stone — Each Piece Is Unique
Every panel is cut from natural alabaster quarried in Spain. Veining, tone, and the raw lower edges vary from slat to slat — around the tiers, no two panels match. Your chandelier will differ from the photos shown; this variation is the character of genuine stone, not a defect.
| Configuration | Dimensions | Bulbs | Weight |
|---|---|---|---|
| Round — Ø 57 | Ø 57 cm / 22.4″ · drop H 150 cm | 12 × G9 | ~16 kg / 35.3 lbs |
| Round — Ø 65 | Ø 65 cm / 25.6″ · drop H 150 cm | 14 × G9 | — |
| Round — Ø 80 | Ø 80 cm / 31.5″ · drop H 150 cm | 18 × G9 | ~34 kg / 75 lbs |
| Round — Ø 95 | Ø 95 cm / 37.4″ · drop H 150 cm | 24 × G9 | — |
| Round — Ø 100 | Ø 100 cm / 39.4″ · drop H 150 cm | 24 × G9 | ~45 kg / 99.2 lbs |
| Round — Ø 120 | Ø 120 cm / 47.2″ · drop H 150 cm | 32 × G9 | ~56 kg / 123.5 lbs |
| Linear — L 106 | L 106 × W 26 cm / 41.7″ × 10.2″ · drop H 150 cm | 24 × G9 | — |
Ø 57
Ø 80–120
Ø 65
Ø 95
Linear L 106
🔍 Tap any diagram to enlarge
Large Rooms & Project Orders
The Ø 100 and Ø 120 drums are scaled for great rooms, hotel lobbies, and grand entries. Send us your room dimensions and ceiling height, and we will confirm the right configuration — and the ceiling support it needs — within 24 hours.
| Configurations | Round Ø 57 / 65 / 80 / 95 / 100 / 120 · Linear L 106 × W 26 |
| Overall drop | H 150 cm / 59″ — adjustable cables, can be lengthened as required |
| Weight | ~16 kg (Ø 57) · ~34 kg (Ø 80) · ~45 kg (Ø 100) · ~56 kg (Ø 120) |
| Material | Natural Spanish alabaster (100% imported from Spain), brass |
| Bulb base | G9 × 12–32 by configuration — LED or Edison bulbs, not included |
| Voltage | AC 110–240V |
| Mounting | Ceiling, hardwired — multi-cable suspension from a brass canopy |
| Finish | Brass pins, connectors, and canopy; white alabaster panels |
| Control | Compatible with common wall switches (not included) |
| Environment | Indoor use |
- Hardwired ceiling installation — a licensed electrician is recommended, and professional installation is strongly advised for the Ø 100 and Ø 120 sizes.
- Real stone weight runs from ~16 kg (Ø 57) up to ~56 kg (Ø 120) — the canopy must be anchored to a junction box or ceiling structure rated well above that load, never drywall alone. For the largest sizes, have the mounting point verified and reinforced.
- Cables adjust independently so the tiers hang level; they can be lengthened as required before shipping.
- Install the G9 bulbs (not included); warm white LEDs of 2700–3000K are recommended.
- Handle the alabaster panels individually and avoid impact — natural stone can chip.
- For indoor use only. Not suitable for bathrooms or damp locations.
Where does the alabaster come from?
Every panel is cut from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass.
Which configuration should I choose?
Over a table, the drum should be roughly half to two-thirds of the table's width: Ø 57–65 suit round tables for 4–6 and bedrooms; Ø 80–95 carry dining tables for 6–8 and living rooms; Ø 100–120 are scaled for great rooms, lobbies, and grand entries. The linear L 106 runs over long tables and kitchen islands. Send us your dimensions and we will recommend within 24 hours.
What bulbs does the Cascade use?
Compact G9 base bulbs — from 12 (Ø 57) up to 32 (Ø 120), not included. Warm white G9 LEDs (2700–3000K) bring out the honey tones as light falls through the tiers, stay cool behind the stone, and rarely need changing.
Does the Cascade need special ceiling support?
Yes — the tiers hang dozens of real stone panels: ~16 kg for the Ø 57, rising to ~56 kg for the Ø 120. The canopy must be anchored to a junction box or ceiling structure rated well above that load, never drywall alone. For the Ø 100 and Ø 120 we strongly recommend professional installation with a verified mounting point.
Can I use it in a bathroom?
No — this fixture is designed for dry indoor locations only and should not be installed in bathrooms, above sinks, or in covered outdoor areas where it could be exposed to moisture.
Why does my chandelier look different from the product photos?
The panels are natural Spanish stone with raw-cut lower edges, so veining, tone, and edge shape vary from slat to slat — around the tiers, no two match, by design. No two Cascade chandeliers are exactly alike; this is the character of real alabaster, not a defect.
Is the Cascade certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
