Vertex Faceted Alabaster Drop Chandelier
VKC5-26923-02
- In stock, ready to ship
The Vertex Faceted Alabaster Drop Chandelier pairs a solid metal cone cap with a tapered, faceted alabaster point below it, meeting at their widest point so light exits through the narrowing stone tip as a concentrated, warm spill rather than a broad wash. It's offered as a single drop, or gathered into a 3-, 5-, 7-, 9-, or 12-light cluster, each cone hung on its own cord from a shared ceiling canopy — trim the cords to different lengths at installation to hold the cluster close and level, spread it wider across the ceiling, or let it fall in a diagonal cascade down a stairwell. Available in Black or Brass hardware.
Faceted cone-and-point shade
A solid metal cone cap meets a tapered, faceted alabaster point at their widest edge, narrowing to a single tip below where the light glows out in a concentrated, warm spill.
Staggered cords, shared canopy
Each cone hangs on its own cord from a shared ceiling canopy. Trimming each cord to a different length at installation lets you gather the cluster close, spread it wider, or cascade it on a diagonal.
Six sizes, two finishes
Available as a 1-, 3-, 5-, 7-, 9-, or 12-light configuration, in Black or Brass hardware, to suit spaces of different scale.
Add product dimension image here.
| 1 Light | Shade Φ11 × H30 cm / Φ4.3″ × H11.8″, on a fixed 50 cm / 19.7″ cord |
| 3 Lights | Canopy Φ15 cm / Φ5.9″, cords 150 cm / 59″ each before trimming |
| 5 Lights | Canopy Φ20 cm / Φ7.9″, cords 150 cm / 59″ each before trimming |
| 7 Lights | Canopy Φ30 cm / Φ11.8″, cords 150 cm / 59″ each before trimming |
| 9 Lights | Canopy Φ35 cm / Φ13.8″, cords 150 cm / 59″ each before trimming |
| 12 Lights | Canopy Φ40 cm / Φ15.7″, cords 150 cm / 59″ each before trimming |
| Lights | 1 × G9 socket per cone |
| Product Name | Vertex Faceted Alabaster Drop Chandelier |
| Product Type | Multi-Drop Alabaster Cone-and-Point Chandelier, Staggered Cords, 6 light-count options |
| Material | Natural Alabaster (tapered, faceted point, hand-cut and hand-polished), Metal (cone cap and canopy, electroplated finish) |
| Finish Options | Black or Brass; alabaster color and veining vary randomly per piece and cannot be specified |
| Size Options | 1, 3, 5, 7, 9, or 12 lights (see Dimensions for canopy size per configuration) |
| Cord Length | 150 cm / 59″ per cone (3- through 12-light clusters), trimmable on site to different lengths; single-light version on a fixed 50 cm / 19.7″ cord |
| Light Source | G9 bulb (small two-pin capsule, not a screw base) — LED recommended over halogen since the bulb sits enclosed with little airflow |
| Color Temperature | Not specified in the source; depends on the G9 bulb fitted |
| Power | Max 40W per socket |
| Voltage | AC 110–240V |
| Control | Wall switch; dimmable only if every socket is fitted with a dimmable G9 bulb and paired with a compatible dimmer switch — standard bulbs do not dim |
| Included Bulb | G9 bulbs are user-replaceable; whether bulbs are included with the fixture wasn't specified in the source |
| Mounting | Ceiling, hardwired to a standard junction box; cords exit from fixed points on the canopy |
| Environment | Indoor only |
| Suitable Spaces | Stairwell, multi-story foyer or atrium, dining table, kitchen island, bedside |
- Mount to a secure ceiling junction box using hardware suitable for the fixture weight; installation is hardwired and should follow local electrical requirements.
- On multi-light clusters, hang all cords at full length first, then shorten one at a time to set the final gathered, spread, or cascading pattern — cords exit from fixed points on the canopy and can't be repositioned.
- Never lift a cone by its cord — it is not load-bearing, and tension on it can strain the socket wiring over time.
- Always support each alabaster cone directly when moving or installing; for the larger, multi-light configurations, two people are strongly recommended.
- Dust with a soft, dry cloth. Avoid water, solvents, and abrasives, which will dull the polished surface irreversibly.
- Do not exceed the fixture's rated 40W per socket. LED G9 bulbs are recommended over halogen, since each bulb sits enclosed inside the stone point with little airflow and LED runs far cooler.
- Natural alabaster will show variation in color and veining between units — this is expected and not a defect.
- Disconnect power before changing a bulb or servicing the fixture.
- Intended for indoor, dry use only.
What is the Vertex Chandelier made from?
A solid metal cone cap paired with a tapered, faceted natural alabaster point, meeting at their widest edge. Each cone hangs on its own cord from a shared canopy. Alabaster veining and color are unique to each piece and can't be specified in advance.
Can I gather, spread, or cascade the cluster?
Yes. On the 3- through 12-light versions, every cord ships at the same 150 cm / 59″ length; trimming each to a different length at installation lets you hold the cluster close and level, spread it wider, or let it fall on a diagonal, since the cords exit from fixed points on the shared canopy.
What sizes and finishes are available?
Six configurations by light count — 1, 3, 5, 7, 9, or 12 — in Black or Brass hardware, chosen independently of size.
Can I choose the alabaster color or pattern?
No — natural alabaster veining and color vary randomly from piece to piece, and a specific pattern or color cannot be requested.
What bulb does it use, and is it dimmable?
Each socket takes a G9 bulb — a small two-pin capsule, not a screw base — user-replaceable, max 40W. LED is recommended over halogen since the bulb sits enclosed with little airflow. It's dimmable only if every socket is fitted with a dimmable G9 bulb and paired with a compatible dimmer; standard bulbs won't dim.
What's the voltage rating?
The fixture is rated AC 110–240V, hardwired to a standard ceiling junction box, indoor use only.
How should I care for it?
Dust with a soft, dry cloth only — avoid water, solvents, and abrasives. Never lift a cone by its cord, and always support each alabaster cone directly when moving or installing it; two people are recommended for the larger, multi-light configurations. Intended for indoor, dry use only.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
