Slender Alabaster Column Chandelier
VKC7-26518-01
- In stock, ready to ship
A slender alabaster column pendant collection — 1, 2, 3, 6, 10, 12, and 15-light arrangements for bedside, dining, kitchen islands, foyers, and two-story stairwells. Each 2.4″ × 11.8″ column is hand-carved from natural alabaster on solid brass hardware with 8W integrated LED.
Slender 1:5 alabaster columns
2.4″ × 11.8″ columns hand-carved from natural alabaster. Veining and translucency vary by piece.
1 to 15 lights · 7 sizes
From bedside single to two-story stairwell cluster configurations.
Integrated LED · dimmable
8W per column · 2700K warm white, dimmable on a compatible wall switch. AC 110–240V universal.
Light count
1, 2, 3, 6, 10, 12, or 15 columns (8W per light, 8W–120W total).
Drop length
39″ to 138″; shortenable on-site, longer on request.
Default configuration
Pictured: 15-column spiral, polished brass hardware, 138″ drop.
Custom finish & drop
Hardware finishes: polished brass (default), matte brass, brushed nickel, satin gold. Email us your ceiling height and room area for a free sizing recommendation.
| Lights | Wattage | Canopy Ø | Max drop |
|---|---|---|---|
| 1-light | 8W | 3.9″ | 59″ |
| 2-light | 16W | 5.9″ | 59″ |
| 3-light | 24W | 11.8″ | 59″ |
| 6-light | 48W | 15.7″ | 79″ |
| 10-light | 80W | 15.7″ | 118″ |
| 12-light | 96W | 19.7″ | 126″ |
| 15-light | 120W | 19.7″ | 138″ |
Click any diagram to enlarge.
| Material | Natural alabaster · solid brass cap and canopy |
| Shade dimension | 2.4″ × 11.8″ (Ø 6 × H 30 cm) per column |
| Light source | Integrated LED · 8W per light (8W–120W total) · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired, round brass canopy |
| Moisture rating | IP20 — indoor, dry/damp locations only |
| Hardware finish | Polished brass (default); matte brass, brushed nickel, satin gold on request |
| Shade finish | Natural white alabaster, hand-carved (veining varies) |
| Control | Compatible with common dimmers (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired ceiling install — a licensed electrician is recommended.
- Cable shortens on-site; for drops beyond the standard max, request extended cable when ordering.
- Sloped ceiling compatible up to 15°; steeper pitches ship with a free sloped-ceiling adapter — send pitch angle when ordering.
- For two-story stairwells, the 10, 12, or 15-light is sized to fall through the well so columns read at both floors.
- Each column integrates an 8W LED engine; rated lifespan over 30,000 hours. End-of-life replacement at authorized service — contact us with your order number.
- Alabaster is a natural stone — small surface variations and color veining are inherent and not defects.
Which size fits my space? How do I choose the right light count?
Quick guide: bedside or reading nook → 1 or 2-light; dining table or kitchen island → 3 or 6-light; foyer or open stairwell → 10, 12, or 15-light. Email us your space dimensions for a personalized recommendation.
Can I use this over a kitchen island or dining table?
Yes. The 1 or 2-light works over a single counter spot or breakfast nook. For a standard 6–8 ft island or 6-seat dining table, the 3 or 6-light hangs cleanly above the work surface. Mount the bottom of the columns 30–36″ above the table or counter.
What's the LED lifespan, and what happens when it eventually fails?
The integrated LED engine is rated over 30,000 hours — roughly 25 years at 3 hours of daily use. If a column fails within the warranty period or after, contact authorized service with your order number for a replacement LED module.
How do I install this on a sloped or vaulted ceiling?
Standard canopies fit flat ceilings or pitches up to 15°. For steeper slopes — common over open stairwells — a sloped-ceiling adapter ships free. Send the pitch angle at order.
Is it dimmable, and what dimmers work?
Yes — dimmable from roughly 10% to 100% on common leading-edge or trailing-edge wall dimmers. A 0–10V or DALI dimmer is also compatible on the 10, 12, and 15-light. Dimmer not included.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size do I need for my dining table or kitchen island?+
For a standard 6–8 ft dining table or island, choose the 3 or 6-light. The 3-light spans 11.8″ wide; the 6-light, 15.7″. Email your exact dimensions for a personalized sizing recommendation.
Can I shorten the drop or extend it for a two-story stairwell?+
Yes. Standard drops range 59″ to 138″ and shorten on-site. For longer drops, request extended cable when ordering. The 10, 12, or 15-light spans two stories; email your ceiling height for sizing.
What finishes are available, and can I customize the hardware?+
Polished brass is standard. Matte brass, brushed nickel, and satin gold are available on request. The 2.4″ × 11.8″ alabaster columns are hand-carved natural stone—veining and color vary by piece.
Is the LED dimmable and replaceable?+
Yes. Each column integrates an 8W LED (2700K warm white), dimmable on any compatible wall dimmer switch. LED is replaceable at authorized service—contact Vakkerlight with your order number when needed.
What ceiling height do I need, and is installation hardwired?+
Hardwired installation by licensed electrician is recommended. Works on slopes up to 15°; steeper pitches receive a free adapter. Email your ceiling height and room area for a free sizing recommendation.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
