Arched Linear Led Chandelier
VKC5-2665-01
- In stock, ready to ship
A refined modernist chandelier built from two geometric elements — a slim semicircular metal arch and a horizontal frosted glass tube holding an integrated LED. Long thin suspension cables drop from a small ceiling canopy, holding the arch in air. Single-head spans 39.4″ (1000 mm); double-head links two arches side by side for 78.7″ (2000 mm). Choose brushed gold or matte black to fit a dining table, kitchen island, console, or hallway.
Semicircular metal arch
Slim iron arch in brushed gold or matte black — a clean half-circle drawn against the wall or ceiling.
Linear LED tube
A horizontal frosted glass tube hides the integrated LED — soft, even glow across the full length.
Adjustable long drop
Suspension cable adjusts from 50–210 cm — works in standard rooms, lofts, or above stairwells.
Integrated LED, no bulb to install
The LED is built into the glass tube — 3W per arch (3W total for Single-Head, 6W total for Double-Head). Warm-white tone matches typical residential interiors. it is replaceable only at authorized service. If you need a specific color temperature for a project,email us before ordering and we can confirm the exact Kelvin rating with the maker.
Brushed gold or matte black
Brushed gold reads warm and subtle against light walls — pairs well with wood, stone, and warm-toned interiors. Matte black draws a graphic line against light walls — strongest in contemporary and minimalist rooms. Both finishes share the same arch geometry and LED tube. For project quantities or a custom finish, email us before ordering.
Dimension sheets for each size. Click to enlarge.
Click either diagram to view full size ↗
| Dimensions | Single-Head: W 39.4″ x H 17.7″ (W 1000 x H 450 mm) Double-Head: W 78.7″ x H 17.7″ (W 2000 x H 450 mm) |
| Canopy | ∅ 2.4″ x H 7.9″ (∅ 62 x H 200 mm) |
| Suspension cable | 19.7″ – 82.7″ (500–2100 mm) adjustable on install |
| Material | Iron (arch, canopy, cable), Glass (LED tube cover) |
| Color | Brushed Gold or Matte Black (choose above) |
| Light source | Integrated LED · 3W (Single-Head) or 6W (Double-Head) · warm-white tone at home |
| Voltage | 120V (AC 110–240V global) |
| Mount | Hardwired ceiling junction box, indoor dry locations |
| Ceiling drops | Single-Head: 2 visible cable drops · Double-Head: 3 visible cable drops |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard ceiling junction box; we recommend a licensed electrician.
- The chandelier hangs from multiple visible cables — Single-Head uses 2, Double-Head uses 3. The main electrical junction box sits at the center; the remaining drops are cosmetic supports. Plan ceiling layout accordingly.
- Adjust each cable length between 500–2100 mm before final installation to set your drop height. Cables should be evenly cut for a level arch.
- Unpack the arch and glass tube carefully — both are thin and can bend or chip if knocked against the box edge.
- Center over a dining table, hung roughly 30–36″ above the surface. Above a kitchen island, 30–36″ above the counter. In open areas, keep at least 7 ft of clearance to the floor.
- Indoor dry locations only — not rated for bathrooms, covered porches, or outdoor use.
- Dust the metal and glass with a dry, soft microfiber cloth. For brushed gold, wipe in the direction of the brush grain. Avoid abrasive cleaners or polishes that can dull either finish.
Single-Head or Double-Head — which fits my room?
Single-Head at 39.4″ wide works above a 4–6 seat dining table, a small kitchen island, a hallway console, or above a desk. Double-Head at 78.7″ wide is intended for an 8–10 seat dining table, a long kitchen island, a wide foyer, or above a sofa. As a rough rule, keep the chandelier roughly half to two-thirds the width of the surface below it.
What does the light look like? Is it dimmable?
The integrated LED is warm-white, diffused through a frosted glass tube — you see an even soft line of light rather than visible LED dots. Total output is moderate (3W Single, 6W Double) suited to accent and ambient layers; for primary task light over a large dining table, layer with overhead or recessed lighting. The lamp is compatible with most TRIAC wall dimmers; we can confirm specific dimmer compatibility on request — email us before ordering if dimming is required.
Brushed Gold vs Matte Black — how do they read in a room?
Brushed gold reads warm and softly reflective — best in rooms with wood floors, stone, cream walls, or other warm tones. The brushed texture catches light without being mirror-like. Matte black reads as a sharp graphic line — best in contemporary, monochrome, or minimalist interiors, and against light walls where the line of the arch reads cleanly. Both finishes share the same arch geometry and LED tube.
How high should the ceiling be?
We recommend at least an 8 ft ceiling for Single-Head and 9 ft or taller for Double-Head — the long suspension cables look best with room to breathe. Hang 30–36″ above a dining table or kitchen island, and keep at least 7 ft of clearance from the floor to the lowest edge of the arch in open areas. The cable adjusts from 50–210 cm, so most ceiling heights work.
What is the warranty?
The chandelier carries a 2-year warranty against manufacturing defects, covering the wiring, LED driver, and cable hardware. Email support with your order number if anything arrives damaged or fails in normal use. Cosmetic scratches from installation are not covered.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size should I choose for my dining table?+
Single-Head (39.4″ wide) fits tables up to 4 feet; Double-Head (78.7″ wide) suits 5–6 foot tables. Hang 30–36″ above the table surface. For custom sizing beyond these, email us to discuss options with our atelier.
How low can I hang it, and what's the minimum ceiling height?+
Suspension cables adjust from 19.7″ to 82.7″ drop. Hang 30–36″ above dining tables or kitchen counters. In open areas, maintain 7 ft clearance to the floor. Plan your ceiling layout before installation.
Which finish—brushed gold or matte black—should I choose?+
Brushed gold reads warm and pairs with wood and stone interiors. Matte black draws a graphic line—strongest in contemporary and minimalist rooms. Both finishes share the same arch geometry and LED output.
Is this chandelier made to order, and can I request a custom finish?+
Yes, all Vakkerlight chandeliers are hand-built in our atelier. For custom finishes or project quantities, email us before ordering to confirm availability and details with our makers.
What does installation require?+
Hardwired to a standard ceiling junction box; a licensed electrician is recommended. Single-Head has 2 visible cable drops; Double-Head has 3. Cables adjust before final installation to set drop height evenly.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
