Trellis Rose Pendant Lamp
VKP1-26613-01
- In stock, ready to ship
A small decorative pendant with four pink porcelain roses climbing a slim brass stem — like a rose trellis ending in a hand-blown amber glass petal shade. The amber glass catches warm light and casts it through eight scalloped glass petals onto the surface below. 9.8″ × 14.2″ (25 × 36 cm). For bedside, bar tops, kitchen islands, entry foyers, or above a small dining table.
Porcelain rose trellis
Four hand-shaped pink porcelain roses with brass leaves and vines climb the stem.
Hand-blown petal shade
Mouth-blown amber glass with a scalloped petal rim — bubbles and texture are part of the craft.
Warm amber glow
The tea-color glass turns a warm-white bulb into a soft amber wash on the surface below.
| Material | Brass, Ceramic, Glass |
| Shade | Hand-blown amber glass, scalloped petal rim |
| Roses | Four hand-shaped pink porcelain roses with brass leaves |
| Light source | One E27 medium-base bulb · max 40W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Size (D × H) | 9.8″ × 14.2″ (25 × 36 cm) |
| Power | AC 110–240V; hardwired over a standard ceiling junction box |
| Use | IP20 indoor and dry locations only |
🔍 Tap to enlarge
Hand-finished — each piece is one of a kind
The porcelain roses are hand-shaped and the amber glass is mouth-blown. Petal shape, glass thickness, small bubbles or seeds in the glass, and slight color variation between the roses are part of the craft — not defects. Email us for photos of in-stock pieces before ordering, especially if matching to existing decor.
Use an LED bulb only — glass and ceramic are heat-sensitive
Both the amber glass and the porcelain roses sit close to the bulb. Use only an LED bulb up to 40W — incandescent and halogen run hot enough to crack hand-blown glass under thermal stress and yellow the porcelain over time. Do not exceed the wattage on the socket label.
- Hardwired ceiling install over a standard junction box — a licensed electrician is recommended.
- Use one E27 medium-base bulb, max 40W (LED equivalent). LED only — never incandescent or halogen on this fixture. Bulb not included.
- For a dining table or kitchen island, hang so the bottom of the shade sits 30–36″ above the surface. The stem length can be confirmed during install; email us if you need a custom drop length set in advance.
- Unpack carefully. The porcelain roses sit on the stem and can chip if knocked; the glass shade is hand-blown and fragile at the petal edges. Lift by the ceiling canopy, not by a rose or the glass rim.
- Indoor and dry locations only (IP20). Not for bathrooms with shower spray, kitchens with steam, or outdoor exposure.
- Dust the brass stem, roses, and glass with a soft, dry cloth or soft brush. Avoid solvents and abrasives — both the brass finish and the porcelain glaze scratch.
Are the roses real porcelain?
Yes — each rose is hand-shaped from real porcelain and painted, then fired. Slight variation in petal shape, glaze depth, and pink tone between the four roses is part of the handwork. The brass leaves and vines are attached to the stem; the roses thread onto the brass armature.
Is the glass really hand-blown?
Yes — the amber petal shade is mouth-blown by hand, so glass thickness, small bubbles or seeds inside the glass, and petal-rim shape vary between pieces. Each shade is one of a kind. If you're matching to an existing fixture, email us for photos of in-stock pieces before ordering.
Where does it fit best?
Bedside (single or twin pendants), a bar top, a kitchen island (often two or three in a row), an entry foyer, or above a small dining table. The amber glass casts a warm pool of light below — best as accent and ambient light, not as a primary room light.
How fragile is it during install?
Both the porcelain roses and the hand-blown glass are fragile. Roses can chip if knocked against the stem during install; the glass petal rim can crack if pressed at the edge. Unpack on a soft surface, lift by the ceiling canopy, and let the electrician handle the wiring without touching the decorative elements.
What's the warranty?
2-year warranty on wiring, socket, and brass armature. Hand-shaped porcelain and hand-blown-glass variation are not defects; chips, cracks, or scorch marks from over-spec bulbs, drops, or knocks during install or use are not covered. Email support with photos within 7 days of delivery for any transit damage.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size space or table is this pendant best for?+
At 9.8″ wide × 14.2″ tall, this works over small dining tables, kitchen islands, bar tops, and entry foyers. Hang the shade bottom 30–36″ above the surface. A licensed electrician can confirm stem length during install.
Are the porcelain roses and amber glass really handmade?+
Yes. Each of the four porcelain roses is hand-shaped and fired. The amber glass shade is mouth-blown by hand, so variation in thickness, bubbles, petal shape, and color between pieces is part of the craft.
What bulb should I use, and can I dim it?+
Use one E27 medium-base LED bulb only, maximum 40W. Never use incandescent or halogen—they run too hot and will crack the hand-blown glass and yellow the porcelain. Dimming is available as a build-to-order option.
Can you customize the stem length or other details?+
Yes. Our atelier builds each pendant to order. Email us before ordering if you need a custom drop length set in advance, or send photos of in-stock pieces if matching to existing decor.
How do I clean and care for this pendant?+
Dust the brass stem, roses, and glass with a soft dry cloth or brush. Avoid solvents and abrasives—both scratch the brass finish and porcelain glaze. Keep it indoors and dry; not for bathrooms with steam or outdoor use.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
