Microcement Swag Pendant Lamp
VKSP-26626-01
- In stock, ready to ship
Microcement Pendant Lamp — raw texture, four silhouettes, gold fitting.
Microcement formed around a mould, air-dried, and demoulded — the surface left deliberately rough: pores, tool marks, faint ridges at the edges where the mould released. A gold brass E14 fitting connects the shade to a braided cord above. The result is a lamp that reads as archaeological, as though it predates the building it hangs in — raw material, warm light, complete restraint. Available in four distinct silhouettes: a wide fluted dome, a wide flat disc, a slim tall cylinder, and a compact bowl.
Microcement — rough expansion, pores, and demould marks are intentional
Microcement shades are cast in moulds and air-dried rather than fired. During drying, natural pores form throughout the surface. Where the mould releases, faint edge marks may remain. These characteristics — the grain, the pores, the slight irregularity at the rim — are deliberate expressions of the material's nature. They are what give each shade its raw, hand-crafted presence. They are not defects.
Tap to enlarge — microcement pore and surface texture. Each piece will differ slightly.
Cast Microcement
Mould-cast and air-dried — porous, raw surface texture, each piece naturally unique.
Gold Brass Fitting
Warm gold E14 holder and canopy — the only polished element against the raw cement.
4 Silhouettes
Fluted dome / wide disc / slim cylinder / compact bowl — cluster or hang individually.
Each model is a distinct silhouette. All share the same cement grey finish and gold E14 fitting. Can be ordered individually or clustered.
Dia 16 × H 20 cm
Dia 25 × H 15 cm
Dia 6 × H 31 cm
Dia 15 × H 16 cm
Cluster A + B + C at different drop heights
Models A, B, and C installed in a cluster above a dining table — the wide disc (B) highest, the dome (A) mid-drop, the slim cylinder (C) lowest — creates a sculptural composition that works especially well in spaces with exposed ceilings or wabi-sabi interiors.
E14 (small screw) — bulb not included
Compatible with E14 LED and Edison filament candle or globe bulbs. A warm-white E14 LED at 2700–3000 K is recommended — the warm amber tone complements the raw cement grey and the gold brass fitting, producing a soft pool of light that enhances the shadow texture of the cement surface. A 4–6W E14 LED is appropriate for the compact scale of all four models. An E14 Edison filament candle or globe bulb works particularly well in Model C (slim cylinder) where the exposed bulb is partially visible at the open base.
| Materials | Cement, Metal, Iron |
| Models & sizes | A (Fluted Dome): ∅ 16 × H 20 cm B (Wide Disc): ∅ 25 × H 15 cm C (Slim Cylinder): ∅ 6 × H 31 cm D (Compact Bowl): ∅ 15 × H 16 cm |
| Bulb base | E14 (small screw) |
| Light source | LED or Edison filament bulb (not included) |
| Voltage | AC 110–240V |
| Cable | 59″ braided cord — adjustable, extendable on request |
| Control | Standard wall switch (not included) |
| Wiring | Plug-in cord with inline switch |
| Mounting | Ceiling pendant |
| Environment | Indoor only |
| Body finish | Gold (brass fitting & canopy) |
| Shade finish | Cement Grey — raw texture, pores and demould marks normal |
| Certification | North America · EU · AU · Saudi Arabia |
There are pores and edge marks on my lamp shade. Is something wrong?
No — these are defining characteristics of microcement, not defects. Microcement is formed in a mould and air-dried rather than fired in a kiln. During the drying process, gases escaping from the material form natural pores throughout the surface. Where the mould releases, faint marks may remain at the rim or edges. Both of these — the porous texture and the demould marks — are inherent to the production process and contribute to the raw, artisanal quality of the shade. They cannot and should not be repaired.
Which model is best for a dining table?
Model B (Wide Disc, ∅ 25 cm) provides the broadest spread of downward light and works well as a solo pendant over a small round or 2-seat dining table. For a 4–6 seat dining table, clustering 3 pendants — such as A + B + C at different drop heights — creates a composed, sculptural installation that covers the full table length and adds visual depth. Model A (Fluted Dome) is the most versatile single pendant for a kitchen island or café-style counter.
Can I clean the cement shade?
Dust with a soft dry brush or use low-pressure compressed air. Do not use wet cloths, water, or any cleaning solution on the cement surface — microcement can absorb liquids and stain permanently. The gold brass fitting can be wiped with a dry microfibre cloth. Avoid all abrasive contact with the cement, which will damage the surface texture. The shade is not waterproof and should not be installed in bathrooms or kitchens where steam or water contact is likely.
Is the Microcement Pendant certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
How do I install the plug-in cord version?
The plug-in version requires no electrician — the braided cord terminates in a standard plug and includes an inline switch on the cord. Attach the ceiling canopy to an existing hook or swag hook in the ceiling, route the cord along the ceiling and wall as desired using cord clips, and plug into a standard outlet. The inline switch allows on/off control without a wall switch. Cord clips and swag hooks are available at most hardware stores and are not included.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
Which model works best over a dining table?+
Model B (Wide Disc, ∅ 9.8″ × H 5.9″) is ideal for dining tables. Models A, B, and C clustered at different drop heights create a sculptural composition, with B highest, A mid-drop, and C lowest—especially striking in exposed-ceiling or wabi-sabi spaces.
What bulb and light source do you recommend?+
Use E14 LED or Edison filament bulbs (not included). A warm-white E14 LED at 2700–3000 K is recommended; 4–6W is appropriate for all four models. Edison filament works particularly well in Model C where the bulb is partially visible.
Can I order different models together or cluster them?+
Yes. All four models—A (Fluted Dome), B (Wide Disc), C (Slim Cylinder), and D (Compact Bowl)—share the same cement grey finish and gold E14 fitting. They can be ordered individually or clustered at different heights.
What are the pores and marks on the shade?+
Pores, tool marks, and faint edge marks are intentional. Shades are cast in moulds and air-dried—natural pores form throughout. Demould marks at the rim are deliberate expressions of the material's raw, hand-crafted nature, not defects.
Can the cord length be adjusted?+
Yes. The braided cord is 59″ and adjustable. Custom cord extension is available on request. Contact us to arrange a longer or shorter drop for your space.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
