Tiered Glass Ceiling Light
VKC4-2657-01
- In stock, ready to ship
A flush-mount ceiling light built around a three-tiered glass shade — the stepped silhouette draws on the wedding-cake forms of early-20th-century Art Deco lighting, finished with a polished chrome ring and a small chrome finial at the center. Light passes through the layered glass and softens at each step, casting an even, diffused glow downward.
At ⌀15.7″ × H6.3″, Tiered Glass sits low and clean against the ceiling — well-suited to entryways, hallways, walk-in closets, powder rooms (dry zones), and small bedrooms. Hardwired install, integrated LED, available in two glass colorways.
Three-Tier Stepped Glass
Art Deco-inspired wedding-cake silhouette — three glass tiers diffuse light through layered curves.
Polished Chrome Ring
High-gloss chrome trim ring frames the glass and reflects ambient light from across the room.
Integrated 17W LED
Built-in LED · 2700K warm white · roughly 100W incandescent equivalent · ~50,000-hour rated life.
White Glass + Chrome
Cool, clean palette — pairs with white walls, modern minimalist interiors, and contemporary architecture.
Beige Glass + Chrome
Warmer, vintage-modern palette — pairs with cream walls, Art Deco interiors, and warm-wood furniture.
Layered glass softens the light
Light passes through three glass tiers and is rounded off at each curve, producing a smooth even wash beneath the fixture rather than a single hard pool. Designed for general ambient ceiling light — not a focused spot.
About the polished chrome ring
The trim ring is chrome-finished metal — high-gloss and reflective. Wipe gently with a dry soft cloth for routine cleaning. Avoid abrasive cleaners and scouring pads, which can scratch the surface. Keep the fixture in dry indoor conditions to preserve the finish.
Indoor dry locations only
Tiered Glass is rated IP20 — suitable for living areas, hallways, bedrooms, closets, and powder rooms. Not rated for showers or wet locations. For powder rooms, install away from direct splash zones.
Integrated LED — long lifespan & ongoing light source service
The integrated LED is rated for roughly 50,000 hours of normal use. For peace of mind, we offer an ongoing light source support service — should the LED ever fail, we will always be able to provide a compatible replacement. If you have any questions, please contact our customer support team.
| Materials | Glass · Polished Chrome Metal |
| Light source | Integrated LED · 2700K warm white · 17W |
| Bulb equivalent | ~100W incandescent |
| Rated LED life | ~50,000 hours |
| Dimensions | ⌀15.7″ × H6.3″ ⌀40 × 16 cm |
| Voltage | AC 110–240V |
| Wiring | Hardwired · standard ceiling junction box |
| Control | Standard wall switch (not included) Not dimmable |
| Mounting | Flush mount · flat ceiling |
| Ceiling height | 8 ft+ recommended |
| IP rating | IP20 · Indoor dry locations only · Not waterproof |
| Certification | North America · EU · AU · Saudi Arabia |
| Colorways | White Glass + Chrome Beige Glass + Chrome |
| Best for | Entryway · Hallway · Walk-in closet · Powder room (dry zone) · Small bedroom · Stairwell landing |
- Hardwired ceiling installation — a licensed electrician is recommended.
- Connects to a standard ceiling junction box.
- Controlled by an external wall switch — the integrated LED is not dimmable, so a standard on/off switch is sufficient.
- Designed for flat ceilings. Not for sloped or vaulted ceilings.
- For indoor dry locations only. Not suitable for showers or wet locations.
What's the difference between the two colorways?
Only the glass color. The chrome trim ring, the form, and the LED are identical between the two — White Glass reads cleaner and more modern; Beige Glass reads warmer and more vintage-modern.
Is it bright enough as a primary ceiling light?
Yes, for small to medium rooms. The 17W integrated LED puts out roughly the equivalent of a 100W incandescent — comfortable as the primary ceiling fixture in entryways, hallways, closets, powder rooms, and small bedrooms. For larger living spaces, consider pairing with additional lamps.
Is the lamp dimmable?
No. The integrated LED is not dimmable. Use a standard on/off wall switch — a dimmer switch will not work and may cause flicker or damage the LED driver.
Can I install it in a bathroom?
Only in dry zones. The fixture is rated IP20 — safe for powder rooms and bathroom areas away from direct water exposure, but not above a shower or anywhere subject to splash.
Can the LED be replaced?
It's rated for ~50,000 hours of normal use — and we offer ongoing light source support, so we will always be able to provide a compatible replacement should it ever fail.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What ceiling height do I need for this light?+
Tiered Glass is a low-profile flush mount designed for ceilings 8 ft and higher. It mounts flat against the ceiling and is ideal for compact spaces like hallways, powder rooms, and walk-in closets.
Should I choose white glass or beige glass?+
White Glass + Chrome offers a clean, modern look for minimalist interiors. Beige Glass + Chrome complements Art Deco design, cream walls, and warm-wood furnishings for a vintage-modern palette.
How do I clean the polished chrome ring?+
Wipe gently with a dry soft cloth. Avoid abrasive cleaners and scouring pads, which can scratch the polished surface. Keep the fixture in dry indoor conditions to preserve the chrome finish.
How long does the integrated LED last?+
The integrated LED is rated for roughly 50,000 hours of normal use. Vakkerlight offers ongoing light source support—if the LED ever fails, we provide a compatible replacement.
Is this a hardwired fixture, and can I install it myself?+
Yes, Tiered Glass is hardwired to a standard ceiling junction box. A licensed electrician is recommended for installation. It's controlled by an external wall switch (not included).
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
