Petals Alabaster Table Lamp
VKT08-2656-03
- In stock, ready to ship
Petralis Alabaster Table Lamp
A pebble of cream alabaster sits on the desk; a slim black steel arm rises from its right side, bends across the top, and carries a small alabaster dome above the base — light pointed downward. The whole composition fits inside a 33 cm square footprint at 34 cm tall, reading as a single small sculpture rather than a piece of equipment.
When the bulb is on, the dome shade glows softly through its translucent stone wall and casts a warm circle of light directly onto the desk surface below — sized for a book, a notebook, or a corner of a console.
Carved Alabaster Pebble
Hand-shaped from a solid block — an irregular pebble form that makes every piece a unique desk sculpture.
Down-Cast Dome
Focused light aimed directly at the tabletop, with a soft translucent glow through the stone shade wall.
Steel Cantilever
A slim, matte-black powder-coated steel arm that provides an architectural contrast to the soft stone.
Each lamp is one of a kind
Alabaster is a natural stone. Vein patterns and tonal shifts vary block by block, and each pebble base is hand-shaped rather than machine-turned. Your piece will be uniquely yours.
Plug-in — no electrician required
Ships with a ~1.8 m (6 ft) cord and an inline switch. Plug into any standard wall outlet and switch on instantly.
Size
W 33 cm × H 34 cm (13" × 13.4")
A compact, near-square footprint designed for executive desks, bedside nightstands, or foyer console corners. The cantilever arm allows the shade to clear books and tech equipment.
Light
3000K Warm White · Integrated LED
The integrated LED is calibrated at 3000K to ensure the stone's natural cream and grey tones read correctly. The down-cast direction minimizes glare while providing effective task lighting.
Specifications
| Material | Natural Alabaster (base + shade) · Powder-coated Steel |
| Dimensions | W 33 cm × H 34 cm / W 13" × H 13.4" |
| Arm Finish | Matte Black Powder Coat |
| Light Source | Integrated LED (3000K Warm White) |
| Wattage | 8W LED (Integrated) |
| Wiring | Plug-in · 1.8 m (6 ft) Cord |
| Switch | Inline Rocker Switch |
| Light Direction | Down-cast / Direct Surface Illumination |
| Voltage | 110–240 V (Universal) |
| Certification | ETL Listed · North America & EU Compatible |
| Environment | Indoor, dry locations only |
Installation
- Plug-and-play setup. Connect to any standard 110–120 V wall outlet.
- No assembly required; the integrated LED is factory-set and ready for use.
- For dimming, use a plug-in dimmer module or pair with a smart-controlled outlet.
- The alabaster base is heavy; always lift from the stone base, not the steel arm.
Downloads
Frequently asked
Will my lamp look exactly like the photo?
Is this a reading lamp or an ambient lamp?
What happens if the LED burns out?
How do I clean the alabaster?
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size desk or surface does this lamp fit best?+
At W 13″ × H 13.4″, it occupies a compact 13″ square footprint. The cantilever arm clears books and equipment. Designed for executive desks, bedside nightstands, and foyer console corners where focused task light and sculptural presence are both valued.
Is the alabaster base different on every lamp?+
Yes. Each base is hand-shaped from a solid alabaster block. Vein patterns, color tone, and pebble form vary naturally. Your piece will be uniquely yours—no two are identical.
Can I dim this lamp?+
The integrated LED is factory-set at full brightness. For dimming control, use a plug-in dimmer module or pair it with a smart-controlled outlet for variable light levels.
How do I care for the alabaster?+
Use a dry, soft microfiber cloth to dust. Alabaster is a natural stone; avoid prolonged moisture exposure. The base is heavy—always lift from the stone, not the steel arm.
Does it require installation or an electrician?+
No. Plug-and-play setup—just connect the 6 ft cord to any standard wall outlet and flip the inline switch. Integrated LED is factory-ready; no assembly required.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
