Fabric Cone Black Fringe Pendant Lamp
VKP9-2676-01
- In stock, ready to ship
A faceted fabric cone topped with structured off-white panels, finished at the base with a generous ring of black fringe. The fabric top is cut into multiple flat facets that meet at folded seams — the seam lines create a geometric, almost origami-like profile when viewed from the side. The black fringe below is in direct tonal contrast to the off-white fabric above — the two-tone combination gives this pendant a stronger graphic presence than most natural-fiber shades. Black cord and canopy keep the hardware recessive. Three sizes, one 3000K E27 bulb included.
1 × E27 3000K LED bulb included
A 3000K warm white E27 LED bulb ships with every pendant. The E27 socket accepts any standard medium screw base replacement. For dimming, swap in a Triac-dimmable E27 LED and a compatible dimmer switch.
Hardwired ceiling install · adjustable cord
Hardwires to a ceiling junction box — not plug-in. Cord length is adjustable at the canopy during installation. A licensed electrician is recommended. Turn off power at the breaker before installation.
Faceted fabric cone
Multiple flat fabric panels joined at folded seams — the faceted geometry creates a structured, angular cone profile that reads more contemporary than a smooth curved shade.
Black fringe contrast
A dense ring of black fringe at the base edge — in direct tonal contrast to the off-white fabric cone above. The black-and-white combination gives this pendant a stronger graphic statement than single-tone fiber shades.
Black hardware · 3 sizes
Black cord and canopy — recessive against most ceiling colors. Three sizes: Ø40×H20 cm, Ø50×H25 cm, Ø60×H30 cm, each maintaining the same cone-to-fringe proportion.
Small — Ø40 × H20 cm
Diameter: 40 cm (15.7″) · Height: 20 cm (7.9″) · Cord: adjustable · Black canopy
Suits: 10–13 m² · bedside · reading nook · 2-seat dining. Pairs well as a duo.
| Size | Diameter × Height | Room | Best for |
|---|---|---|---|
| Small | Ø40 × H20 cm 15.7″ × 7.9″ |
~10–13 m² | Bedside, reading nook, 2-seat dining, pair |
| Medium | Ø50 × H25 cm 19.7″ × 9.8″ |
~13–16 m² | 2–4 seat dining, bedroom, living room |
| Large | Ø60 × H30 cm 23.6″ × 11.8″ |
~16–18 m² | 4–6 seat dining, open-plan living, statement |
All three sizes share the same faceted cone + black fringe proportion. Height grows with diameter. Cord length is adjustable at the black canopy. For dining, hang bottom of shade 70–80 cm above the table surface.
Ø40×H20 · Ø50×H25 · Ø60×H30 cm
🔍 Tap to enlarge
| Light source | E27 medium screw base · 1 × 3000K LED bulb included · replaceable |
| Sizes | Ø40×H20 cm · Ø50×H25 cm · Ø60×H30 cm |
| Canopy | Black finish · confirm diameter with supplier |
| Cord | Black · adjustable at canopy · confirm max length with supplier |
| Color | Off-white structured fabric (cone) + black fringe (base) — single colorway |
| Material | Structured fabric (cone) · fringe (base) · metal hardware |
| Room coverage | 10–18 m² — varies by size |
| Mounting | Hardwired ceiling pendant |
| IP rating | IP20 — indoor, dry locations only |
| Dimmable | Yes — with Triac-dimmable E27 LED and compatible dimmer |
| Best for | Dining room · bedroom · living room · Contemporary · Eclectic · Maximalist · Dark-palette · Transitional interiors |
Default configuration
Select size at checkout. One 3000K E27 LED bulb included. Single colorway: off-white + black. Email us for trade pricing.
- Turn off power at the breaker. A licensed electrician is recommended for hardwired ceiling connections. Adjust cord at the black canopy to set drop height — for dining, bottom of shade 70–80 cm above the table surface.
- Screw the included 3000K E27 bulb into the socket. Do not exceed the socket's rated wattage. Replace with any E27 medium base bulb of your choice.
- For dimming: the included bulb may not be dimmable — check packaging. Replace with a Triac-dimmable E27 LED and pair with a compatible dimmer switch.
- Fabric cone: dust with a soft brush or low-suction vacuum. Do not wet-clean or steam — moisture can warp the structured fabric facets. Keep away from cooking steam and high-humidity zones.
- Black fringe: lint roller or soft brush to remove dust. Do not wet-clean. Separate tangled strands by hand. Fringe will sway gently in airflow — normal. Keep away from direct fan drafts if a static hang is preferred.
- Black canopy and cord: dry cloth only.
Does a bulb come included?
Yes — one 3000K warm white E27 LED bulb ships in the box, ready to install. The E27 socket accepts any standard medium screw base replacement when needed.
Which size should I choose?
The Small (Ø40 cm) suits a bedside, reading nook, or 2-seat table — it pairs well as a duo. The Medium (Ø50 cm) anchors a 2–4 seat dining table or bedroom. The Large (Ø60 cm) is the statement size for a 4–6 seat dining room or open-plan living area. All three maintain the same cone-to-fringe proportion, so the graphic black-and-white contrast reads consistently across sizes.
What is the "faceted" fabric cone?
The cone shade is made from multiple flat fabric panels joined at folded seams — rather than a smooth curved cone, the surface is made up of flat facets with visible seam lines between them. From the side, this gives the shade a geometric, origami-like profile. From below, it reads as a structured cone with the seam pattern visible when lit from inside. The faceted construction also means the shade holds its shape more rigidly than a draped fabric shade.
Is it dimmable?
The included bulb may not be dimmable — check its packaging. For reliable dimming, replace with a Triac-dimmable E27 LED and a compatible leading- or trailing-edge dimmer switch.
What interior styles does this suit?
The black-and-white two-tone combination is more graphic than most natural-fiber pendants — it suits contemporary, eclectic, maximalist, and dark-palette interiors where a strong visual statement is wanted. The off-white fabric cone also reads in transitional and French-country rooms when paired with other black accent elements. It does not suit purely warm-natural, Japandi-minimalist, or all-neutral rooms where the black fringe contrast would read as too bold.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size should I choose for a dining table?+
Small (15.7″ diameter) suits 2-seat dining; Medium (19.7″) works for 2–4 seats; Large (23.6″) fits 4–6 seat tables. Hang the shade 70–80 cm above the table surface.
Can I use this pendant in a bedroom or reading nook?+
Yes. The Small size (15.7″ × 7.9″) is ideal for bedside and reading nooks. All three sizes work in bedrooms and living rooms up to 18 m².
Is this pendant dimmable?+
The pendant accepts any E27 bulb. For dimming, use a Triac-dimmable E27 LED paired with a compatible dimmer switch—a build-to-order option from our atelier.
How do I install this pendant?+
It hardwires to a ceiling junction box with an adjustable black cord. A licensed electrician is recommended. Turn off power at the breaker before installation.
Can the cord length be adjusted?+
Yes. Cord length is adjustable at the black canopy during installation, allowing you to customize the drop height for your space.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
