White Feather Art Deco Customize Chandelier
VKC2-25826-02
- In stock, ready to ship
White Feather Art Deco Chandelier — wing glass cascade, white & gold, made to order.
Dozens of individually suspended wing-like glass elements — in soft gloss white and glistening gold — cascade from fine steel cables in a graceful inverted arc. Each piece mimics the delicate curve of a feather, the entire composition suggesting a flock caught mid-flight. Suspended in space with no visible structure, the Feather Chandelier exists as pure light and form. A non-standard, made-to-order installation piece for spaces that can accommodate it.
Important — please read before ordering
This chandelier is a non-standard, made-to-order installation piece. It has no canopy — the individual steel cables are designed to pass directly through the ceiling surface. This requires:
- A plasterboard (drywall/gypsum board) ceiling where individual cable holes can be drilled cleanly, or a concrete ceiling with a suitable suspended ceiling system.
- Sufficient ceiling void space above the ceiling surface to route and terminate the electrical cables — typically a minimum of 15–20 cm above finished ceiling is needed.
- If your ceiling does not have suitable void space or structural conditions, a custom stainless steel canopy version can be manufactured — at a different price. Contact us before ordering to discuss your ceiling conditions.
Made-to-order — confirm your ceiling before purchasing
Because of the no-canopy installation design, we strongly recommend contacting our support team before placing your order. Share your ceiling type (drywall, concrete, suspended), available void depth, and preferred configuration, and we will confirm compatibility or quote a custom canopy version if required.
Wing Glass Elements
Each feather-shaped glass piece individually suspended — white gloss and gold, layered in arc formation.
No Visible Structure
Fine steel cables only — no canopy, no frame. The composition floats in space as pure form.
3 Models, 5 Configurations
Round (A & B) and linear (C) options — suited to round tables, square rooms, or long dining formats.
All models: integrated LED, white & gold finish, 59″ adjustable cable. Contact us to confirm ceiling suitability for any configuration.
| Model | Dimensions | Form |
|---|---|---|
| A‑S | ∅ 60 cm × H 150 cm∅ 23.6″ × H 59.1″ | Round — standard drop |
| A‑L | ∅ 60 cm × H 200 cm∅ 23.6″ × H 78.7″ | Round — deep drop (stairwells / voids) |
| B‑S | ∅ 60 cm × H 150 cm∅ 23.6″ × H 59.1″ | Round — denser arrangement |
| B‑L | ∅ 80 cm × H 150 cm∅ 31.5″ × H 59.1″ | Round — wider, grander scale |
| C | L 120 × W 40 × H 200 cmL 47.2″ × W 15.7″ × H 78.7″ | Linear — long dining / gallery format |
Select at time of order. Integrated LED fixed at manufacture.
Warm Light 3000K Default
Warm amber tone deepens the gold glass and gives the white glass a pearl-warm quality — the most flattering choice for this chandelier.
Need a different colour temperature?
Neutral White (4000K) and Cool White (6000K) are available as custom orders. Contact our support team and we will reply within 24 hours.
| Materials | Metal (steel cables), Glass (wing elements) |
| Models | A‑S / A‑L / B‑S / B‑L / C — see configuration table above |
| Canopy | None — no-canopy design. Cables pass directly through ceiling. Custom stainless steel canopy available on request at additional cost. |
| Ceiling requirement | Plasterboard ceiling with void space — confirm suitability before ordering |
| Light source | Integrated LED |
| Colour temperature | Warm Light 3000K (default) · Other temps on request |
| Voltage | AC 110–240V |
| Cable | 59″ adjustable — extendable on request |
| Control | Standard wall switch (not included) |
| Wiring | Hardwired |
| Mounting | Ceiling — direct cable penetration (no canopy) |
| Environment | Indoor only |
| Body & shade finish | White & Gold |
| Order type | Made to order — non-standard / custom product |
| Certification | North America · EU · AU · Saudi Arabia |
Why is there no canopy on this chandelier?
The no-canopy design is an intentional aesthetic choice — it allows the steel cables to disappear cleanly into the ceiling surface with no visible hardware, creating the visual effect of the glass elements floating in space without any structural anchor visible. A conventional canopy would interrupt this effect. The cables are designed to penetrate directly through a plasterboard ceiling into the ceiling void above where they are connected and terminated.
What type of ceiling does this require?
The ideal installation is a plasterboard (drywall or gypsum board) suspended ceiling with at least 15–20 cm of void space above the finished ceiling level. Each cable needs a clean small hole drilled through the board, and the electrical connections are made above the ceiling in the void. Concrete ceilings with a suspended plasterboard ceiling below also work. Direct bare concrete ceilings are generally not suitable without adding a suspended layer — contact us to discuss your specific situation.
What if I cannot install the no-canopy version?
If your ceiling does not have suitable void space or structural conditions for the no-canopy version, we can manufacture a custom stainless steel canopy version. This collects all the cables at a single visible canopy plate, which is surface-mounted to the ceiling — similar to a conventional chandelier. The custom canopy version is priced separately. Contact our support team before ordering and we will advise on the right solution and provide a quote.
Is this a standard product or a custom order?
The White Feather Chandelier is a non-standard, made-to-order product. Each unit is produced specifically for the customer’s order and cannot be returned or exchanged on the basis of an ordering error or change of mind. Please confirm your ceiling suitability, preferred model, and configuration with our support team before placing your order.
Is professional installation required?
Yes, professional installation by a licensed electrician is strongly recommended for this product. The installation requires drilling precise cable penetration holes through the ceiling board, routing cables into the ceiling void, and making electrical connections in a confined space. The no-canopy design also requires careful spacing and positioning of the individual cable holes during installation to achieve the correct arc composition.
Is the White Feather Chandelier certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
Which model works best for a double-height foyer or stairwell?+
Model A‑L (∅ 23.6″ × H 78.7″) or Model C linear (L 47.2″ × W 15.7″ × H 78.7″) suit tall voids. Model A‑L's deep drop is ideal for stairwells. Contact us to confirm your ceiling height and void depth before ordering.
What ceiling conditions does this chandelier require?+
Requires plasterboard ceiling with 15–20 cm void space above to route electrical cables. Steel cables pass directly through drilled holes—no canopy. Concrete or unsuitable ceilings need a custom stainless steel canopy version; contact us first.
What size should I choose for my dining table?+
Model B‑S (∅ 23.6″) suits standard tables; B‑L (∅ 31.5″) works for larger or square dining rooms. Model C linear (L 47.2″) fits long rectangular formats. All drop 59.1″ standard, adjustable to 78.7″.
Can I customize the color temperature or other specs?+
Default is 3000K warm white. Neutral (4000K) and cool white (6000K) are custom orders. We also offer custom stainless steel canopies, alternate drops, and bespoke configurations in our atelier—contact support to discuss.
How do I clean the glass wing elements?+
Soft cloth with mild soap and water works for white and gold glass. Each feather-shaped piece is individually suspended, so access is straightforward. Avoid harsh chemicals that may affect the gold finish.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
