Verella Cast Resin Wall Sconce
VKW7-2657-01
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- إرجاع لمدة 60 يومًا على العناصر المؤهلة
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- مدفوعات آمنة ومأمونة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- في المخزون، وعلى استعداد للشحن
Verella Cast Resin Wall Sconce
A solid block of cast resin — recessed at the center to a thinner panel where the integrated LED can shine through, rounded at the edges into a smooth pillow form that holds the texture of the casting mold. Two slim metal clips secure it to the wall, top and bottom, leaving the resin floating between them. When the LED is on, the recessed center glows from within: a vertical column of warm light pushing through the textured surface, diffused but unmistakable. The 20.5 × 31.5 cm scale fits either side of a mirror, a single statement wall, or a sequence along a hallway. Available in six colorways — two resin tones paired with brushed nickel, two with gunmetal, and two with brushed brass.
Cast Resin Plaque
Solid hand-cast block — ~5 kg of resin per piece, surface texture left as it came out of the mold.
Lit Inner Field
The center is recessed and translucent — the integrated LED glows through a softer, thinner section of the resin.
Six Colorways
Six resin tones — blue, green, gray, orange, tea, amber — each paired with one of three metal finishes.
Cast resin — not natural stone or glass
The plaque is solid hand-cast resin. The textured surface, color depth, and translucency are all engineered into the casting process. This is the correct material for the look — natural alabaster cannot be tinted into colors like blue or green, and glass cannot be cast with this kind of raw textured face. It is heavier and warmer-feeling than acrylic, but it is resin, not stone.
Lamp Body: Available in Matte Sand Gold, Black Antique Bronze, Natural Copper, and Satin Nickel.
Hardwired — connects to standard junction box
The Verella mounts to a standard US wall junction box and wires into your home's 110–240V supply. We recommend a licensed electrician for installation; estimate 20–30 minutes per fixture for an experienced installer.
Six colorways
Blue
Cool blue resin with warm brass hardware — the highest-contrast pairing of the six.
Green
Translucent green resin with darker gunmetal hardware — the most architectural of the six.
Gray
Neutral gray resin with gunmetal hardware — reads as a single dark object during the day.
Orange
Saturated orange resin with warm brass hardware — the boldest of the six, best as a single statement piece.
Tea
Smoky tea-brown resin with cool nickel hardware — warm resin against cool metal, balanced and easy to place.
Amber
Warm amber resin with cool nickel hardware — the most classic combination, suits transitional and modern rooms.
Light
3000K Warm White · 14W Integrated LED
The LED is built in behind the recessed center field and is not user-replaceable. 14W of warm white at 3000K — calibrated to flatter the warm resin tones (orange, tea, amber) and to keep the cooler tones (blue, green, gray) from going clinical.
Dimensions
Specifications
| Plaque material | Hand-cast solid resin (textured face) |
| Hardware material | Iron — brushed nickel, gunmetal, or brushed brass finish |
| Dimensions | W 20.5 × H 31.5 cm / W 8.1″ × H 12.4″ |
| Backplate | W 9 × H 31.5 cm / W 3.5″ × H 12.4″ |
| Wall projection | 9 cm / 3.5″ |
| Weight | 5.35 kg / 11.8 lb |
| Light source | Integrated LED, 14 W, 3000K warm white |
| Bulb replaceable | No — integrated LED |
| Coverage | 3–5 m² / 32–54 sq ft (accent / wall lighting) |
| Wiring | Hardwired — connects to standard US junction box |
| Voltage | 110–240 V (universal) |
| Certification | ETL listed — compatible with North America |
| Colorways | 6 — blue / green / gray / orange / tea / amber |
| Use environment | Indoor, dry locations only |
Installation
- Hardwired install. Mounts to a standard US wall junction box; licensed electrician recommended.
- Turn off power at the breaker before opening the existing junction box. Verify with a voltage tester.
- Connect black to black (line), white to white (neutral), and ground to the green or bare copper wire from the box.
- The fixture weighs 5.35 kg / 11.8 lb. Use the supplied hardware into a junction box anchored to a stud or rated for fixture weight; do not mount into drywall alone.
- For indoor use only. Not suitable for bathrooms, outdoor, or other damp locations.
Downloads
Frequently asked
Is the plaque resin or natural stone?
What happens if the LED burns out?
Do I need an electrician to install it?
How do I choose between the six colorways?
How do I clean the textured resin face?
Is the Verella certified for North America and Europe?
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
