Square Frame LED Sconce
VKW9-26522-01
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- إرجاع لمدة 60 يومًا على العناصر المؤهلة
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- مدفوعات آمنة ومأمونة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- في المخزون، وعلى استعداد للشحن
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
Finish & diffuser
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.
Click to enlarge ↗
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Moisture rating | IP20 — indoor, dry locations only |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
What is the center disc made of — is it glass?
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?
The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?
Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?
It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?
On a dry wall away from the shower, yes — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support for help — we reply within one business day.
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
