Tiered Alabaster Wall Sconce
VKW4-26612-01
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- سياسة الإرجاع والاستبدال لمدة 60 يومًا
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- In stock, ready to ship
A sculptural wall sconce — five horizontal alabaster panels, staggered like a slow geometric ladder, lit from within by a warm-white LED bulb. The natural stone glows softly between the stainless-steel supports; the form reads as a quiet wall sculpture, lit or unlit. 10.2″ × 13.8″ × 8.7″ projection (26 × 35 × 22 cm). For foyers, gallery walls, stairwells, and statement bedrooms.
Five tiered panels
Hand-shaped horizontal alabaster panels stagger out from the wall in a quiet geometric rhythm.
Natural stone glow
A warm-white LED bulb behind the panels lights the natural alabaster on both faces.
Stainless-steel support
Slim stainless-steel armature holds the panels in place; the support disappears against the glow.
| Material | Alabaster, Stainless Steel |
| Panels | Five hand-shaped horizontal alabaster panels, staggered |
| Support | Stainless-steel armature |
| Light source | One E27 medium-base bulb · max 40W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Size (W × H × Proj.) | 10.2″ × 13.8″ × 8.7″ (26 × 35 × 22 cm) |
| Power | AC 110–240V; hardwired over a standard junction box |
| Control | Wall switch on/off |
| Use | IP20 indoor and dry locations only |
Click the diagram to enlarge.
W10.2″ × H13.8″ × Proj.8.7″ 26 × 35 × 22 cm
🔍 Click to open full size in a new tab
Natural alabaster — each piece is one of a kind
Each panel is hand-shaped from natural alabaster, with its own veining, color shifts, and small inclusions. No two sconces will look identical — variation from photos is expected, not a defect. Email us for photos of in-stock pieces before ordering.
Deep projection — measure before ordering
This sconce projects 8.7″ (22 cm) from the wall, which is deeper than a typical sconce. Plan for clearance in hallways, beside doorways, and around traffic paths — install where it can sit unobstructed.
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended.
- Use one E27 medium-base bulb, max 40W (or LED equivalent). Use LED only — incandescent and halogen bulbs run hot enough to discolor natural alabaster over time. Bulb not included.
- Controlled by a standard wall switch (on/off). Not designed for external dimmer compatibility — pair with a standard switched circuit.
- Indoor and dry locations only (IP20). Safe in damp vanity areas away from shower spray; not rated for wet zones. Confirm your local code before bathroom installation.
- Handle the alabaster panels gently during install — natural stone can chip if knocked. Once mounted, the sconce is stable; the risk is during unpacking and hanging.
- Dust the panels with a soft, dry cloth. No water or solvents on the stone; the stainless-steel armature can be wiped with a barely-damp microfiber.
Is the alabaster real natural stone?
Yes — each panel is hand-shaped from a single piece of natural alabaster. The stone's translucency lets a warm-white LED bulb glow through both faces. Veining, color, and small inclusions are unique to each piece.
Where does it fit best?
Foyers, gallery walls, stairwells, statement bedrooms, dining-room accents. Best on a flat unbroken wall where the staggered panels read against open background. The 8.7″ projection means it isn't a low-profile sconce — give it space.
What bulb does it take, and how bright is it?
One E27 medium-base bulb, max 40W (or LED equivalent), not included. Use a warm-white LED only — incandescent and halogen run hot enough to discolor natural alabaster over time. The light is soft and ambient through the stone — accent and mood light, not whole-room lighting. Pair with ceiling or table lights for general illumination.
Is it dimmable?
The sconce is controlled by a standard wall switch (on/off). It's not designed for external dimmer compatibility — using a dimmer on the wall circuit may cause flicker or shorten the LED life. Use a standard switched circuit.
What's the warranty?
2-year warranty on wiring, socket, and finish. Natural stone veining and inclusions are not defects; chips from drops or knocks during install or use, and alabaster discoloration from using an over-spec or non-LED bulb, are not covered. Email support with photos within 7 days of delivery for any transit damage.
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
