Disc Base Dome Wall Sconce
VKW7-2612-02
- الشحن القياسي إلى الولايات المتحدة
- تغطية الضمان متاحة
- إرجاع لمدة 60 يومًا على العناصر المؤهلة
- دعم العملاء عبر البريد الإلكتروني & الهاتف
- التخصيص الشخصي متاح
- تتوفر خيارات شحن متعددة
- مدفوعات آمنة ومأمونة
- متوفر بخيارات كهربائية خاصة بالمنطقة
- In stock, ready to ship
A minimalist wall sconce built around three quiet elements: a flat circular disc baseplate, a slim arm projecting outward, and a small half-dome head with an integrated warm-white LED beneath. A small push-button sits on the baseplate for direct on/off, with or without a wall switch wired upstream. Available in three sizes — Compact (disc + arm + dome only), Standard (with an arched arm), and Tall (with an extra vertical rod and a decorative sphere finial above) — and two matte finishes, White or Graphite. Six SKUs in all.
Half-dome head
Small dome with an integrated warm-white LED beneath — soft directional glow downward, no hotspot, no glare.
Push-button on baseplate
A small button on the disc baseplate switches the light on and off directly — handy where the install has no convenient wall-switch wiring.
Three sizes, two finishes
Compact for narrow spaces, Standard for general use, Tall as a statement piece — each in matte White or Graphite.
Powder-coated finish across the disc, arm, and dome — uniform tone, fingerprint-resistant. Swatches above are digital approximations; actual matte finish may shift slightly with lighting and your screen.
| Size | Dimensions | Configuration | Best for |
|---|---|---|---|
| Compact | ∅ 5.9″ × H 4.3″ (∅ 15 × H 11 cm) | Disc + short arm + dome | Bedside, alcove, narrow corridor, picture light |
| Standard | ∅ 11″ × H 15.4″ (∅ 28 × H 39 cm) | Disc + arched arm + dome | Living room, hallway, beside an armchair, general wall sconce |
| Tall | ∅ 11.8″ × H 27.6″ (∅ 30 × H 70 cm) | Disc + vertical rod with sphere finial above + arm + dome | Statement wall sconce, large wall, entryway, foyer, hotel guest room |
6 SKUs total — 3 sizes in each of 2 finishes. The Tall measures 70 cm overall from the bottom of the baseplate to the top of the sphere finial; the arm sits roughly two-thirds up the rod. The Compact is the smallest of the three by a wide margin — about the footprint of a paperback book.
Integrated warm-white LED
The dome houses a sealed warm-white LED module — approximately 5W, around 2700–3000K color temperature. The module is built into the head and is not user-replaceable; if it fails, return for service under warranty. No separate bulb to buy, fit, or worry about. The dome shape concentrates the light downward, so the sconce reads more as a soft directional task light than as ambient room-fill.
Push-button on the baseplate
A small push-button sits on the front face of the disc baseplate. A short press turns the light on; another press turns it off. The button operates the LED directly, independently of any wall switch wired upstream — useful when the sconce mounts in a location without convenient wall-switch wiring (a guest bedroom, a hallway alcove, a reading nook). If you do have a wall switch on the same circuit, both controls work in series: either the wall switch or the baseplate button can turn the light off, whichever you reach for first.
Powder-coated metal, matte uniform
The disc, arm, and dome are powder-coated in either matte White or matte Graphite. The finish is durable in normal use, easy to wipe, and shows fewer fingerprints than gloss or polished metal. The Tall version's sphere finial is decorative — it's not load-bearing, and it isn't meant to be unscrewed or removed. For project quantities, custom colors, or alternative configurations (single sphere finial replacement, etc.), email us before ordering.
Official dimension sheets for all three sizes. Click to enlarge.
| Dimensions — Compact | ∅ 5.9″ × H 4.3″ (∅ 15 × H 11 cm) |
| Dimensions — Standard | ∅ 11″ × H 15.4″ (∅ 28 × H 39 cm) |
| Dimensions — Tall | ∅ 11.8″ × H 27.6″ (∅ 30 × H 70 cm) including sphere finial |
| Finishes | Matte White · Matte Graphite (2 colors) |
| Material | Powder-coated metal (disc baseplate, arm, dome head; rod and sphere on Tall) |
| Light source | Integrated LED · approximately 5W · warm-white 2700–3000K · not user-replaceable |
| Switch | Push-button on baseplate (operates independently of any wall switch) |
| Voltage | 120V (AC 110–240V global) |
| Mount | Hardwired to a standard wall junction box, indoor dry locations |
| Suitable spaces | Bedside (Compact), living room and hallway (Standard), entryway and foyer (Tall) — indoor dry only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired to a standard wall junction box behind the disc baseplate — we recommend a licensed electrician for installation.
- Plan mount height by size. Compact: 130–150 cm from the floor for bedside or reading-nook use. Standard: 150–170 cm typical wall sconce height. Tall: position so the sphere finial reaches eye level or above (typically baseplate at 110–130 cm so the sphere sits at 180–200 cm).
- For the Tall size: the 70 cm vertical rod and sphere finial extend well above the baseplate. Confirm the wall has enough vertical clearance (at least 80 cm above the baseplate) and that the wall behind the rod is flat — the rod presses lightly against the wall and looks best on plaster, painted drywall, or smooth masonry.
- The arm of the Standard and Tall sizes projects out from the wall — leave clear space ahead of the sconce: 25 cm clearance for the Standard, 25 cm for the Tall.
- Unpack carefully — the matte powder-coat finish is durable but can scuff if dragged across a hard surface. Lift the sconce by the disc baseplate, not by the dome or the arm.
- Wire the sconce to your home circuit per local electrical code. If you have a wall switch on the same circuit, both the wall switch and the baseplate push-button can turn the light off. The push-button operates the LED directly, so the sconce can be used even without a wall switch in the circuit.
- Indoor dry locations only — not rated for bathrooms, kitchens with steam exposure, covered porches, or outdoor use.
- Wipe the powder-coat finish with a soft, dry cloth as needed. For occasional smudges, a slightly damp cloth followed by a dry cloth is fine. Avoid solvents, abrasive pads, or polishes — they can dull or strip the matte finish.
Which size fits my space?
The Compact at ∅ 15 × H 11 cm is the smallest — about the footprint of a paperback book — and works as a discreet bedside reader, an alcove light, or a picture-style accent. The Standard at ∅ 28 × H 39 cm is a general-purpose wall sconce sized for living rooms, hallways, and beside an armchair. The Tall at ∅ 30 × H 70 cm (with the decorative sphere finial above the arm) is a statement piece for an entryway, foyer, hotel guest room, or large wall where a vertical line draws the eye upward. If you're not sure, the Standard suits the most common residential uses.
How does the push-button switch work alongside a wall switch?
The push-button on the baseplate operates the LED module directly. If you have a wall switch on the same circuit, both controls work together: turning the wall switch off cuts power and the lamp is off; turning the wall switch on lets the baseplate button control the lamp from there. If the wall switch is on and the baseplate button has the lamp off, a press of the button turns it on. The sconce can also be installed without a wall switch at all — the baseplate button alone handles on/off. Useful in retrofits where adding new wall-switch wiring isn't practical.
Is the LED replaceable? What if it fails?
No. The LED is a sealed module built into the dome head. Lifetime is rated at roughly 25,000 hours of normal use, after which output gradually drops. If the LED fails within the warranty window, return for service or replacement. Outside warranty, the whole head module would need to be replaced — email us for service options.
White or Graphite — which works better?
Both finishes are matte powder coat and fingerprint-resistant. White reads as a soft off-white that blends into pale walls and reflects ambient room light back into the space — it looks especially clean on plaster, painted drywall, or light marble walls. Graphite reads as a deep matte gray that holds its own against busy or dark walls and pairs well with leather, dark wood, brass, and oxidized hardware. The Graphite is dark enough to read as "almost black" in low light but with a softer character.
What is the warranty?
The sconce carries a 2-year warranty against manufacturing defects in the LED module, wiring, push-button switch, joints, and powder-coat finish under normal indoor use. Email support with your order number if anything arrives damaged or fails in normal use. Minor lot-to-lot variation in matte tone, small scuffs from impact, and damage from outdoor or wet-area installation are not covered.
في حالة وجود مشكلة في جودة المنتج أو تلف أثناء النقل، سنقدم خدمات الإرجاع والاستبدال المجانية، مما يضمن تجربة خالية من المتاعب لعملائنا.
ورقة بيانات المنتج
صمم بثقة: خدمة إضاءة ثلاثية الأبعاد من فاكرلايت
تخلص من التخمين في تصميم الإضاءة. سواءً للمساحات السكنية أو التجارية، تتيح لك خدمة تصميم الإضاءة ثلاثية الأبعاد المبتكرة من Vakkerlight تصور وتخصيص وحدات الإضاءة في بيئة ثلاثية الأبعاد واقعية قبل الشراء.
- حلول مُخصصة: ترتيبات مخصصة مصممة خصيصًا لمساحتك.
- تقنية ثلاثية الأبعاد واقعية: تعرّف على شكل تجهيزاتك قبل تركيبها.
- الدعم الفني المتخصص: احصل على إرشادات فردية من متخصصي التصميم لدينا.
موارد & يدعم:
تفضل بزيارة صفحة [خدمة تصميم الإضاءة ثلاثية الأبعاد] لمعرفة المزيد. هل تحتاج إلى مساعدة؟ ملفات 3D Max هل تحتاج إلى معلومات تفصيلية عن المنتج؟ راسلنا عبر البريد الإلكتروني على: info@vakkerlight.com وسيسعد فريقنا بمساعدتك.
