Stretch Fabric Petal Flush Mount
VKC7-2673-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
A flush mount ceiling light with a pleated stretch-fabric shade shaped into overlapping petal segments — the fabric pulls and gathers at the center, creating natural tension folds across the surface that catch light differently at different angles. The center cap is turned solid walnut with a brass-tone hardware fastener — a small material detail visible from below that keeps the fixture grounded in warm, furniture-grade materials rather than anonymous white plastic. At H15 cm the profile sits close to the ceiling and works in standard 2.4 m (8 ft) rooms without any drop. Integrated LED panel included — no bulb required. Three diameters: Ø40, Ø50, Ø60 cm.
Integrated LED panel — no bulb required or replaceable
The LED light source is an SMD panel built into the fixture. It ships pre-installed — no separate bulb purchase is needed. Because the LED is integrated, it cannot be replaced by the user when it reaches end of life. Rated LED lifespan is typically 25,000+ hours under normal use conditions.
Hardwired ceiling install — flush mount
This fixture hardwires directly to the ceiling junction box. It is not plug-in. A licensed electrician is recommended. Turn off power at the breaker before installation. Confirm your ceiling box is positioned at the correct location — flush mount fixtures cannot be repositioned after hardwiring.
Pleated stretch fabric
Stretch fabric pulled into overlapping petal segments — the material gathers at the center and fans outward, creating natural tension folds that shift in appearance under different light angles and times of day.
Integrated LED · no bulb
SMD LED panel ships pre-installed in the fixture — no bulb to source, install, or replace. Plug in power at the breaker after installation and it is ready.
Solid walnut center · H15 cm
A turned walnut cap with a brass-tone fastener closes the center of the shade — visible from below as a warm material detail. At H15 cm, the profile stays close to the ceiling and suits standard room heights.
Small — Ø40 × H15 cm
Diameter: 40 cm (15.7″) · Height: 15 cm (5.9″) · Flush mount — no drop
Light source: integrated LED panel (included) · wattage: confirm with supplier
Suits: 10–13 m² rooms · bedroom · study · hallway · bathroom (confirm IP rating).
| Size | Diameter × Height | Room coverage | Best for |
|---|---|---|---|
| Small | Ø40 × H15 cm 15.7″ × 5.9″ |
~10–13 m² 108–140 sq ft |
Bedroom, study, hallway, compact living room |
| Medium | Ø50 × H15 cm 19.7″ × 5.9″ |
~13–16 m² 140–172 sq ft |
Bedroom, dining area, living room, open study |
| Large | Ø60 × H15 cm 23.6″ × 5.9″ |
~16–18 m² 172–194 sq ft |
Living room, dining room, primary bedroom, open-plan space |
Stretch fabric shade · solid walnut center cap · brass-tone hardware · metal frame
The shade is constructed from stretch fabric pulled over a metal petal-segment frame. Each segment fans outward from the center, and the tension in the fabric creates natural gather lines across the surface — not printed or embossed, but physically formed by how the fabric sits under tension. The center convergence point is capped with a solid walnut turned disc, finished with a small brass-tone fastener that closes the assembly from below. The overall color — off-white stretch fabric against walnut brown — stays within the warm neutral register without introducing any contrast color. The metal hardware frame mounts flush to the ceiling junction box.
Integrated SMD LED panel · included · non-replaceable · color temperature: confirm
An SMD (surface-mount device) LED panel is pre-installed inside the fixture and ships ready to use. The panel diffuses light evenly across the stretch fabric from behind, illuminating the gather folds from within. Because the LED is integrated into the fixture body, there is no socket and no user-replaceable bulb — the panel cannot be swapped out at end of life. Wattage and exact color temperature should be confirmed with the specification sheet; the LED driver specification determines whether dimming is supported.
🔍 Dimensions — tap to enlarge
| Light source | Integrated SMD LED panel · pre-installed · non-replaceable · no bulb required |
| Color temperature | CONFIRM BEFORE PUBLISHING — confirm with supplier spec sheet |
| Wattage | CONFIRM BEFORE PUBLISHING — confirm per size with supplier |
| Sizes | Small: Ø40 × H15 cm (15.7″ × 5.9″) Medium: Ø50 × H15 cm (19.7″ × 5.9″) Large: Ø60 × H15 cm (23.6″ × 5.9″) |
| Color / finish | Off-white stretch fabric · solid walnut center cap · brass-tone hardware (single colorway) |
| Material | Stretch fabric shade · solid wood (walnut) center cap · metal hardware frame |
| Room coverage | 10–18 m² (108–194 sq ft) — varies by size |
| Mounting | Flush mount · hardwired to ceiling junction box · H15 cm (no drop) |
| Input voltage | CONFIRM BEFORE PUBLISHING — confirm 110–240V or 220–240V |
| IP rating | IP20 — indoor, dry locations only (confirm with supplier) |
| Dimmable | CONFIRM BEFORE PUBLISHING — depends on LED driver specification |
| LED lifespan | ~25,000+ hours (confirm with supplier) |
| Best for | Bedroom · living room · dining area · study · hallway · Japandi · organic modern · transitional · warm-neutral interiors with standard ceiling heights |
Default configuration
Select size at checkout. Integrated LED panel included — no separate light source required. Single colorway: walnut + off-white fabric. Email us for trade or bulk pricing.
- Turn off power at the breaker before installation. A licensed electrician is recommended for all hardwired ceiling connections. Flush mount fixtures install directly to the junction box — confirm the box position suits the room layout before hardwiring, as the fixture cannot be repositioned afterward.
- The integrated LED panel is pre-installed — no bulb assembly is required. After installation, restore power at the breaker and the fixture is ready to use.
- If the fixture is dimmable (confirm with spec sheet): use a compatible leading- or trailing-edge LED dimmer switch. Connecting a non-dimmable driver to a dimmer circuit may cause flickering or driver damage.
- Stretch fabric shade: dust with a soft brush or low-suction vacuum brush attachment. Do not wet-clean, iron, or steam — heat and moisture can distort the tension folds and alter the way the fabric sits across the frame. Avoid installing in high-humidity zones unless IP rating is confirmed.
- Solid walnut center cap: wipe with a dry cloth only. Avoid water and oil-based polish, which can darken or strip the wood finish. Brass-tone hardware fastener: dry cloth only.
- Metal frame: dry microfiber cloth. Avoid liquid cleaners and abrasive pads.
Does it need a bulb?
No. An integrated SMD LED panel ships pre-installed inside the fixture — there is no socket and no separate bulb to purchase or install. Hardwire to the ceiling junction box and restore power at the breaker; the light is ready immediately. The LED panel is non-replaceable by the user; rated lifespan is typically 25,000+ hours under normal use conditions, which at 6 hours daily use is approximately 11+ years.
Which size should I choose?
The Small (Ø40 cm) suits a bedroom, study, or hallway in a 10–13 m² space — it provides centered overhead light without visually dominating a smaller room. The Medium (Ø50 cm) works as the primary ceiling light in a 13–16 m² bedroom or dining area. The Large (Ø60 cm) anchors a 16–18 m² living room, primary bedroom, or open dining space. All three sizes share the same H15 cm profile, so the visual depth in the room is consistent regardless of size; only the spread of light and the decorative footprint change.
Is it dimmable?
Dimming depends on the internal LED driver specification. Confirm dimmability with the supplier spec sheet before connecting to a wall dimmer switch. If the driver supports Triac (leading-edge) or trailing-edge dimming, use a compatible LED dimmer — do not use a standard incandescent dimmer. Connecting a non-dimmable driver to a dimmer circuit can cause flickering, buzzing, or driver damage over time.
What does the "stretch fabric" look like in person?
The fabric is an off-white stretch material pulled over a segmented petal frame. When installed and unlit, it looks like a softly pleated dome with natural gather lines radiating from the walnut center cap outward — similar in texture to gathered linen or a stretched canvas, with variation in how the folds catch ambient light. When lit from behind by the LED panel, the fabric glows evenly from within, and the fold lines appear as gentle shadows across the lit surface. It does not have a printed pattern — the texture comes entirely from the physical tension and gather of the material.
Will this work in a standard 8-foot ceiling room?
Yes. At H15 cm (5.9″) the fixture sits flush against the ceiling with no pendant drop, making it well-suited for standard 2.4 m (8 ft) residential ceilings. The bottom of the fixture will sit at ceiling height minus 15 cm — in a room with a 2.4 m ceiling and a typical dining table at 75 cm height, there is ample clearance beneath the fixture for all three sizes.
What interior styles does this suit?
The off-white fabric, solid walnut center, and brass-tone detail work naturally in Japandi, organic modern, and transitional interiors that use warm neutrals, natural wood furniture, and soft textile surfaces. The petal silhouette has enough visual character to be a design element in a room, rather than just a functional overhead light. It does not suit industrial, high-gloss contemporary, or cool-palette interiors where the warm fabric and walnut would read as out of place.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
