Beveled Wood Linear Pendant Lamp
VKP06-26524-001
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In stock, ready to ship
A beveled wood linear LED pendant light in a warm walnut-color finish, with an angled open channel cut along the top face and the integrated LED set into the bevel. Light grazes out of the channel for a soft, directional wash rather than a bare strip. Three lengths — 47″, 59″, and 71″ — suit dining tables, kitchen islands, and hallways, hung on an adjustable black cable at a warm 2700K.
Beveled channel
An angled groove runs the length of the bar, seating the LED in a clean recessed line.
Directional wash
The angled face aims a soft wash of light along the table, easing glare from a bare strip.
Warm 2700K light
Integrated LED runs warm white at 2700K — easy, relaxed light for dining and task work.
Three set lengths
47″ · 59″ · 71″. The beveled bar stays 4.7″ wide × 1.6″ thick at every length.
Cable drop
The black suspension cable adjusts on-site for tables and islands. Shorten excess at the canopy.
Default configuration
Pictured: 59″ bar in a walnut-color finish on a black cable, 2700K integrated LED. Other lengths made to order.
Sizing help & custom lengths
Pick a bar about 12″ shorter than your table so it clears each end. Unsure which length fits, or need a custom size? Email us your table dimensions for a free recommendation.
| Length | Profile (W × H) | Metric (L × W × H) | Best for |
|---|---|---|---|
| 47″ | 4.7″ × 1.6″ | 120 × 12 × 4 cm | 4–6 seat tables, breakfast nooks |
| 59″ | 4.7″ × 1.6″ | 150 × 12 × 4 cm | 6–8 seat tables, kitchen islands |
| 71″ | 4.7″ × 1.6″ | 180 × 12 × 4 cm | 8+ seat tables, long islands, hallways |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Wood, Metal |
| Body finish | Walnut color |
| Shade finish | Walnut-color beveled bar with frosted LED diffuser strip |
| Light source | Integrated LED · 2700K warm white |
| Lengths | 47″ / 59″ / 71″ (120 / 150 / 180 cm) |
| Profile | 4.7″ W × 1.6″ H (12 × 4 cm), beveled channel |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired ceiling mount, adjustable black cable |
| Moisture rating | IP20 — indoor, dry/damp locations only |
| LED life | Rated L70 ≥ 30,000 hours; replaceable at authorized service |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Hardwired ceiling install — a licensed electrician is recommended.
- Hang the bar 30–36″ above a dining table; raise it for kitchen islands or walkways.
- The black cable adjusts at the canopy; feed excess cable into the ceiling box to level the bar.
- Orient the beveled channel toward the seating side if you want the wash aimed across the table.
- Choose a bar about 12″ shorter than the table length so it clears diners at both ends.
- Real wood grain, tone, and figure vary by piece; the photograph shows a representative sample, not the exact bar shipped.
Is the beveled wood linear LED pendant bright enough to light a dining table?
Yes. The integrated LED runs the full length of the channel, so light spreads evenly down the table with no dark gaps. At 2700K it gives a warm, relaxed dining light over the whole surface.
What length should I choose for my table or kitchen island?
Pick a bar about 12″ shorter than the surface so it clears both ends. 47″ suits 4–6 seat tables, 59″ fits most 6–8 seat tables and islands, and 71″ covers 8+ seat tables and long hallways.
What does the beveled channel do for the light?
The LED sits inside an angled groove rather than flush on the underside, so the light reads as a soft directional wash instead of a bright exposed line. You see the glow and the wood, not the diode, which cuts glare at the table.
Can this mount on a sloped or vaulted ceiling?
The standard canopy handles flat ceilings and pitches up to 15°. For steeper slopes we include a sloped-ceiling adapter free of charge — send us the pitch angle when you place the order.
What is the warranty, and what happens at the end of the LED's life?
2-year warranty on the fixture and wiring. The LED is rated for L70 ≥ 30,000 hours and is replaceable at authorized service if it ever needs it. Email support replies within one business day.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
