Alabaster Avalon Halo Chandelier
VKC6-240807-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Return and Exchange Policy
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Available in Region-Specific Electrical Options
- Em estoque
Alabaster Avalon Halo Chandelier
The Avalon Halo Chandelier rings a brushed brass drum with chunky fluted blocks of natural Spanish alabaster — 100% imported from Spain — each block lit from within so the whole halo glows like a crown of veined stone. The brass inner band bounces warm light back through the alabaster, deepening the honey tones after dark. Choose a single ring in Ø 60 or Ø 80 cm for dining tables and living rooms, or the two-tier Ø 60 + 80 cm cascade for staircases, double-height foyers, and great rooms — with both a standard warm 3000K version and a Triac-dimmable version offered.
Spanish Alabaster Blocks
Fluted stone segments, 100% imported from Spain — each veined differently.
Brass Halo Drum
The brushed inner ring reflects warm light back through the stone.
Single or Two-Tier
Ø 60, Ø 80, or a stacked Ø 60 + 80 cascade for tall spaces.
Natural Spanish Stone — Each Piece Is Unique
Every block is carved from natural alabaster quarried in Spain. Veining and tone vary from piece to piece — around the halo, no two blocks match. Your chandelier will differ from the photos shown; this variation is the character of genuine stone, not a defect.
Default — Warm 3000K
Fixed warm light with a common on/off wall switch. Not dimmable.
Triac Dimmable — Warm 3000K
Dims smoothly from full brightness to a low glow with a Triac wall dimmer.
For the dimmable version, pair with a Triac dimmer switch (shop on Amazon ↗) for the best results. Dimmer not included.
| Configuration | Dimensions | Weight |
|---|---|---|
| Single — Ø 60 | Ø 60 × H 8 cm / Ø 23.6″ × H 3.1″ | ~14 kg / 30.9 lbs |
| Single — Ø 80 | Ø 80 × H 8 cm / Ø 31.5″ × H 3.1″ | ~16 kg / 35.3 lbs |
| Two-Tier — Ø 60 + 80 | Ø 60 + 80 × H 64 cm / Ø 23.6″ + 31.5″ × H 25.2″ | ~30 kg / 66.1 lbs |
Single Ø 60
Single Ø 80
Two-Tier
🔍 Tap any diagram to enlarge
Staircase & Double-Height Projects
The two-tier cascade is scaled for stairwells, foyers, and great rooms with 3 m+ ceilings. Send us your ceiling height and room dimensions, and we will confirm the right configuration and drop lengths within 24 hours.
| Configurations | Single Ø 60 or Ø 80 · Two-tier Ø 60 + 80 (H 64 cm) |
| Weight | ~14 kg (Ø 60) · ~16 kg (Ø 80) · ~30 kg (two-tier) |
| Material | Natural Spanish alabaster (100% imported from Spain), brass, metal |
| Light source | Integrated LED — replaceable; if the LED is ever damaged, contact us for a replacement module |
| Color temperature | Warm light 3000K — choose the Triac-dimmable version for dimming |
| Voltage | AC 110–240V |
| Mounting | Ceiling, hardwired — multi-cable suspension, hangs level |
| Hanging cables | 59″ adjustable, can be extended upon request |
| Body finishes | Brass or black |
| Shade finish | White alabaster |
| Control | Common wall switch (default) or Triac dimmer (dimmable version) — not included |
| Environment | Indoor use |
- Hardwired ceiling installation — a licensed electrician is recommended, and professional installation is strongly advised for the two-tier version.
- Real stone weight: ~14 kg (Ø 60), ~16 kg (Ø 80), and ~30 kg for the two-tier — anchor the canopy to a junction box or ceiling structure rated well above that load, never drywall alone.
- Cables adjust independently so each ring hangs level; they can be extended upon request before shipping for tall ceilings.
- Integrated LED — no bulb installation needed. If the LED module is ever damaged, contact us for a replacement.
- For the dimmable version, install a compatible Triac wall dimmer (not included).
- Handle the alabaster blocks with care and avoid impact — natural stone can chip.
- For indoor use only. Not suitable for bathrooms or damp locations.
Where does the alabaster come from?
Every block is carved from natural alabaster that is 100% imported from Spain — the same Spanish stone prized in fine lighting for its warm tone and translucency. It is genuine quarried stone, not resin or faux-alabaster glass.
Which configuration should I choose?
Over a table, the ring should be roughly half to two-thirds of the table's width: the Ø 60 suits round tables for 4–6 and living rooms with standard ceilings; the Ø 80 carries dining tables for 6–8 and larger living rooms. The two-tier Ø 60 + 80 (H 64 cm) is scaled for stairwells, foyers, and great rooms with 3 m+ ceilings. Send us your dimensions and we will recommend within 24 hours.
Is the Avalon dimmable?
Two versions are offered. The default is a fixed warm 3000K light on a common on/off wall switch. The Triac-dimmable version dims smoothly when paired with a compatible Triac wall dimmer — see the dimmer link above. Choose the version at checkout; contact us if unsure and we will reply within 24 hours.
Can I replace the LED?
Yes — the LED module is replaceable. Nothing needs changing in normal use, since quality LEDs of this type are rated for tens of thousands of hours; and if the LED is ever damaged, contact us and we will arrange a replacement module — we reply within 24 hours.
Does the Avalon need special ceiling support?
Yes — the rings carry real stone weight: ~14 kg for the Ø 60, ~16 kg for the Ø 80, and ~30 kg for the two-tier. The canopy must be anchored to a junction box or ceiling structure rated well above that load, never drywall alone. For the two-tier we strongly recommend professional installation.
Why does my chandelier look different from the product photos?
The blocks are natural Spanish stone, so veining and tone vary from piece to piece — around the halo, each block carries its own pattern by design. No two Avalon chandeliers are exactly alike; this is the character of real alabaster, not a defect.
Is the Avalon certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
