Magic Circus Chandelier
V202007092101
- In stock, ready to ship
Complete the collection
$275.00
$136.00
A starburst chandelier — gold-finished brass rods radiate outward from a central hub, terminating alternately in opal white glass globes and solid brass spheres. Mid-century modern Sputnik form, scaled for high-ceiling rooms. Three sizes from 23.6″ to 39.3″ diameter, with 11, 12, or 18 lit globes per fixture. Electrophoretic gold finish on the brass; matte white opal glass globes.
⚠ Statement-scale chandelier — verify ceiling height before ordering
The fixture diameter ranges 23.6″ to 39.3″, with a 19.7″ suspension rod above (extensible on request). Add 4–6″ for the bottom-globe drop. Recommended minimum ceiling: 11 ft for the 23.6″ size, 12 ft for the 31.5″, and 13+ ft for the 39.3″. Glass globes and brass rods are individually replaceable in transit — inspect on arrival.
Radial Sputnik form
Brass rods radiate symmetrically from a central hub — the classic mid-century starburst, scaled for grand interiors.
Globes + brass spheres alternate
Opal glass globes (lit) alternate with solid brass spheres (unlit) — light + mass play visually against each other.
3 sizes
11-globe (23.6″), 12-globe (31.5″), and 18-globe (39.3″) — match the fixture diameter to your room scale.
| Variant | Diameter | Lit globes | Min ceiling |
|---|---|---|---|
| Small | Ø23.6″ (60 cm) | 11 × G4 | 11 ft |
| Medium | Ø31.5″ (80 cm) | 12 × G4 | 12 ft |
| Large | Ø39.3″ (100 cm) | 18 × G4 | 13+ ft |
Each size includes a 19.7″ (50 cm) suspension rod above the fixture body, extensible on request. Add 4–6″ for the bottom-globe drop when calculating final ceiling-to-globe height.
Single finish combination — the electrophoretic gold + opal white pairing is the design language. Alternate finishes are not stocked.
Where it works
Best in mid-century modern, Hollywood Regency, or transitional interiors with neutral walls (white, cream, light grey) that let the gold spread without competing. Pairs naturally with walnut or oak furniture, marble surfaces, and warm-white-painted walls. Avoid placing in front of patterned wallpaper — the radial rods compete visually with patterns. For Art Deco interiors, the symmetrical form lends itself well as the focal point above a round dining or foyer table.
| Material | Electrophoretic-gold-finished brass rods and spheres · hand-blown opal white glass globes |
| Light source | G4 bi-pin base — LED bulb only, ≤2.5W per socket (20–25W halogen equivalent), sold separately |
| Number of sockets | 11 / 12 / 18 G4 sockets matching the chosen size |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired ceiling mount via 19.7″ rigid brass suspension rod |
| Finish | Electrophoretic gold (brass) · matte opal white (glass) — single combination, fixed |
| Suspension rod | 19.7″ (50 cm) standard; extensions on request |
| Control | Compatible with TRIAC dimmers and standard wall switches (not included) |
| Certification | Certified for North America, EU, Australia, and Saudi Arabia |
| Warranty | 2 years on frame, finishes, and wiring; broken glass globes replaced free on arrival |
- Licensed electrician required. The 31.5″ and 39.3″ sizes need a structurally rated junction box; verify with your electrician before ordering. Multi-person installation strongly recommended for the 18-globe size.
- The central hub and suspension rod mount first; individual rods, brass spheres, and glass globes attach on-site after the body is wired and secured. Two-person handling makes globe placement faster — one positions, one tightens.
- G4 LED bulbs sold separately. Recommended: 2700K warm-white G4 LED, ≤2.5W per bulb (20–25W halogen equivalent). G4 is a small bi-pin base — purchase explicitly labeled "G4 LED" (not "G9", a different base size). Avoid halogen G4 — heat builds inside the opal glass globe and can yellow it over time.
- Indoor dry locations only. Not for bathrooms, kitchens above stovetops, or covered outdoor areas — humidity damages the electrophoretic gold coating.
Which size should I order?
Small (Ø23.6″, 11 globes) — for 4–6 ft dining tables, breakfast nooks, or smaller foyers (11+ ft ceilings). Medium (Ø31.5″, 12 globes) — for 6–8 ft dining tables, kitchen islands, or great rooms (12+ ft ceilings). Large (Ø39.3″, 18 globes) — for grand foyers, two-story dining rooms, or as a single statement piece in a 14+ ft tall space. As a rule of thumb, the diameter should be roughly 1/3 to 1/2 of your dining table or foyer width.
What is G4? Where do I find G4 LED bulbs?
G4 is a very small bi-pin LED base (4 mm pin spacing) — smaller than G9 (9 mm spacing), much smaller than E26. The advantage: G4 LEDs fit inside the small opal globes without showing through. The disadvantage: less common at general hardware stores. Find them at Amazon (search "G4 LED 2700K dimmable"), Home Depot online, or specialty lighting retailers like Bulbs.com. Choose 2.5W maximum, 2700K color temperature, dimmable if you want dimming.
Why are some spheres lit and others solid brass?
The radial rods alternate between two sphere types: opal white glass globes (housing a G4 LED bulb that lights up) and solid brass spheres (decorative, unlit). The visual rhythm of light + mass alternating around the hub is the design intent — it adds dimension that an all-lit chandelier lacks. On the 11-globe model, this means 11 lit + ~11 solid brass; on the 18-globe, 18 lit + ~18 solid brass for a denser starburst.
Is it dimmable?
Yes — compatible with standard TRIAC (forward-phase) wall dimmers like Lutron Caséta or Leviton, paired with dimmable G4 LED bulbs. All globes dim together. Dimming is recommended — with 11 to 18 bulbs at full brightness, the chandelier is bright; dimmed to 30–40%, the globes glow as discrete warm points around the radial mass, which is the most evocative setting.
What's the warranty?
2-year warranty on the brass frame, electrophoretic gold finish, sockets, and wiring. Hand-blown glass globes that arrive broken in transit are replaced free with photos emailed within 7 days. After warranty, replacement globes and brass spheres are available as paid-service parts (kept in stock for 3 years after your order). G4 LED bulbs are standard replaceable parts.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
