Carved Wood Cordless Table Lamp
VKT7-2610-01
BLACK FRIDAY
Every light, sitewide
Ends Dec 5 · 11:59 PM ET
- In stock, ready to ship
A small cordless table lamp carved from solid wood — a stacked sequence of organic, twisting curves rising to a compact mushroom-style shade at the top, seated on a perforated wood disc base. Built around a 6000 mAh USB-C rechargeable battery with touch-dimmer control: up to 24 hours of warm light at the brightest setting, or 72 hours on low. No cord, no outlet to plan around — set it on a bedside, side table, dining surface, study desk, or anywhere a soft glow belongs. Available in three finishes: Dark Wood, Light Wood, or Matte Black.
Hand-carved wood
A stacked sequence of organic curves carved from solid wood — each piece hand-finished, with grain and small marks of the carver's tools.
Cordless USB-C
6000 mAh internal battery, USB-C charging — up to 24 hr on high, 72 hr on low. No cord trailing across the table.
Touch dimmer
Tap once to power on; tap again to cycle through three brightness levels and off. Integrated 5W warm-white 3000K LED.
Each piece is carved by hand from solid wood, so grain pattern, exact tone, and the small marks of carving vary subtly between units. Dark Wood and Light Wood show visible grain; Matte Black is opaque over the grain. Swatches are digital approximations.
The lamp ships partially charged; give it a full USB-C charge before first use. A typical evening of 4–5 hours on medium runs a week or more between charges.
| Material | Solid hardwood, hand-carved, finished in stain or paint |
| Finishes | Dark Wood · Light Wood · Matte Black |
| Light source | Integrated 5W LED · Warm white 3000K · not user-replaceable |
| Battery | 6000 mAh Li-Po, sealed internal |
| Charging | USB-C · 5V / 2A input · ~8 hours for a full charge |
| Runtime | 24 hr on high · 72 hr on low |
| Control | Touch · 3-level dimming (high · medium · low · off) |
| Placement | Free-standing · Indoor dry locations only |
| Certifications | CE (EU) · SAA/RCM (Australia & NZ) · CSA (Canada) · FCC tested (US) — see certificates |
- Charge fully before first use (about 8 hours) with any USB-C cable and a 5V/2A adapter, computer USB port, or power bank.
- Place on a flat, stable surface; on textured surfaces such as linen or rough wood, a small felt or cork pad keeps it from rocking.
- Indoor dry locations only — keep away from bathrooms, steam, heat sources, and direct sunlight.
- Dust with a soft, dry cloth along the grain. Never use water or solvents; clean the perforated base with a soft dry brush.
- If stored unused, top up the charge every 2–3 months to keep the battery healthy.
How long does the battery last, and how long does it take to charge?
On a full charge you get about 24 hours of light at the brightest setting, or 72 hours at the lowest — a typical evening of 4–5 hours on medium runs a week or more between charges. A full charge takes approximately 8 hours over USB-C at 5V/2A, best done overnight. Any standard USB-C cable with a 5V/2A adapter, a computer USB port, or a power bank will work; USB-PD fast-charging is not required.
How does the touch dimmer work?
Tap the wood body once to turn it on at full brightness. Tap again to step down to medium, again to low, and a fourth tap turns it off. The sensor responds to bare skin — gloves or very wet hands may not register, so try a firmer tap with a dry finger if it doesn't respond.
Will the carved wood look exactly like the photos?
Each lamp is carved by hand from solid wood, so the silhouette, depth of curves, grain pattern, and small tool marks vary subtly between pieces — no two are identical. Dark Wood and Light Wood show visible grain; Matte Black is opaque over the grain.
Is the battery replaceable, and what is the warranty?
The 6000 mAh Li-Po battery is sealed inside and isn't user-replaceable; like all lithium batteries it gradually loses capacity over 300–500 charge cycles. The lamp carries a 2-year warranty against manufacturing defects in the battery, LED module, touch sensor, charging port, and carved body. Email info@vakkerlighting.com with your order number if anything fails in normal use. Natural wood variation is not covered as a defect.
Downloads
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers. Read the full Return & Refund Policy; if your order arrives damaged, see what to do when you receive a damaged item (report within 72 hours) and our shipping & tracking guide.
Design with confidence: Vakkerlight 3D Lighting Design Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, our 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized solutions: custom arrangements tailored to your exact space.
- True-to-life 3D: see how your fixtures will look before installation.
- Expert support: 1-on-1 guidance from our design specialists.
Resources & support: visit the 3D Lighting Design Service page to learn more. Need 3D Max files or detailed product parameters? Email info@vakkerlight.com and our team will be happy to assist you.
Product cut sheets (Google Drive) →
Welcome to Vakkerlight’s 3D Services. We pride ourselves on offering comprehensive design support to meet all your lighting needs. If you require 3D drawings, CAD plans or space design services, our experienced support team is here to help — email info@vakkerlight.com.
