Carved Wood Cordless Table Lamp
VKT7-2610-01
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In magazzino, pronto per la spedizione
A small cordless table lamp carved from solid wood — a stacked sequence of organic, twisting curves rising to a compact mushroom-style shade at the top, seated on a perforated wood disc base. Built around a 6000 mAh USB-C rechargeable battery with touch-dimmer control: up to 24 hours of warm light at the brightest setting, or 72 hours on low. No cord, no outlet to plan around — set it on a bedside, side table, dining surface, study desk, or anywhere a soft glow belongs. Available in three finishes: Dark Wood, Light Wood, or Matte Black.
Hand-carved wood
A stacked sequence of organic curves carved from solid wood — each piece hand-finished, with grain and small marks of the carver's tools.
Cordless USB-C
6000 mAh internal battery, USB-C charging — up to 24 hr on high, 72 hr on low. No cord trailing across the table.
Touch dimmer
Tap once to power on; tap again to cycle through three brightness levels and off. Integrated 5W warm-white 3000K LED.
Each piece is carved from solid wood, so grain pattern, exact tone, and the small marks of carving vary subtly between units. Swatches above are digital approximations.
Charge it first — then enjoy up to 3 days of light per charge
The lamp ships with the internal battery partially charged, but a full Type-C charge before first use is recommended. Plug into any standard USB-C cable (a 5V/2A adapter is typical — the lamp does not require USB-PD fast-charging); full charge takes approximately 8 hours, best done overnight. On a full charge, expect about 24 hours of light at the brightest setting or 72 hours at the lowest — a typical use pattern (4–5 hours per evening on medium) runs a week or more between charges.
Three-level dimming, no buttons or switches
A capacitive touch sensor on the lamp body recognizes a light tap. Tap once to power on at the brightest setting; tap again to step down to medium, again to low, and again to power off. The touch is sensitive to bare skin — gloves or very wet hands may not register. For accidental touches by curious pets, place the lamp where casual brushing-against doesn't reach the body.
Integrated 5W warm-white LED
A 5W warm-white LED at 3000K is built into the head, hidden behind the small mushroom shade so it grazes downward across the carved trunk. The LED is sealed inside and is not user-replaceable — if the module fails, return for service under warranty. No separate bulb to buy or worry about.
Solid wood, hand-carved, three finishes
Each lamp is carved by hand from a single piece of solid wood, then finished in one of three tones — a warm Dark Wood, a pale Light Wood, or an ebonized Matte Black. The Light and Dark finishes preserve visible wood grain; the Matte Black is fully opaque over the grain. Because each piece is hand-carved, the exact silhouette, depth of curves, and grain pattern shift subtly between units — small variation is part of how the material is made. For project quantities or a custom-finish enquiry, email us before ordering.
Official dimension sheet. All three finishes share the same dimensions. Click to enlarge.
Click to view full size ↗
| Dimensions | ~ 5.6″ × H ~ 14.5″ (~ 14.2 × H ~ 36.8 cm) |
| Weight | 0.7 kg (1.5 lb) |
| Material | Solid hardwood, hand-carved, finished in stain or paint |
| Finishes | Dark Wood · Light Wood · Matte Black (3 SKUs) |
| Light source | Integrated 5W LED · warm-white 3000K · not user-replaceable |
| Battery | 6000 mAh internal Li-Po (sealed, not user-replaceable) |
| Charging | USB-C · 5V / 2A input · ~ 8 hours for full charge |
| Runtime | 24 hr on high · 72 hr on low |
| Control | Touch · 3-level dimming (high · medium · low · off) |
| Placement | Free-standing, indoor dry locations only |
| Suitable spaces | Bedside, side table, dining surface, study, reading nook, hotel/restaurant table |
| Certification | CE · FCC · RoHS (for the integrated Li-Po battery and LED module) |
- Charge the lamp before first use — a full Type-C charge takes approximately 8 hours. The lamp ships partially charged so you can test it on arrival, but a full charge maximises battery life from the start.
- Use a standard USB-C cable plugged into any 5V/2A USB power adapter, a computer USB port, or a USB power bank. The lamp does not require USB-PD fast-charging.
- Place on a flat, stable surface. The carved wood base sits well on smooth surfaces; for textured surfaces (linen tablecloths, rough wood), a small felt or cork pad keeps the lamp from rocking.
- Tap the lamp body to operate: one tap turns on at full brightness; subsequent taps step down to medium, low, then off. The touch sensor recognises bare skin — gloves or very wet hands may not register reliably.
- Indoor dry locations only — wood and a Li-Po battery do not belong in bathrooms, kitchens with steam exposure, covered porches, or outdoor settings. Keep away from heat sources and direct sunlight.
- Dust the carved wood with a soft, dry cloth, following the grain. Never use water or solvents on the wood — finished wood absorbs moisture, which can warp the body, dull the finish, or seep into the battery compartment. The perforated disc base can be cleaned with a soft dry brush.
- If you store the lamp unused for a long time, top up the charge every 2–3 months to keep the Li-Po battery healthy. Storing at 0% for months can permanently reduce battery capacity.
How long does the battery last? How long to charge?
On a full charge: about 24 hours of light at the brightest setting, or 72 hours at the lowest. A typical evening of medium brightness (4–5 hours per night) runs a week or more between charges. A full charge takes approximately 8 hours via USB-C at 5V/2A — best done overnight. The lamp does not require USB-PD fast-charging; any standard USB-C cable and a 5V/2A adapter (or a USB port, or a power bank) will work.
How does the touch dimmer work?
Tap the wood body once to power on at full brightness. Tap again to step down to medium, again to low, and a fourth tap turns it off. The sensor is capacitive — bare skin works best; thick gloves or very wet hands may not register. If a tap doesn't respond, try a slightly firmer tap with a dry finger.
Will the carved wood look exactly like the photos?
Each lamp is carved by hand from a single piece of solid wood, so the exact silhouette, depth of curves, grain pattern, and small marks of the carving tools shift subtly between pieces. Every unit sits in the same design family, but no two are identical. The photos are representative. The Light and Dark finishes show visible grain; the Matte Black finish is opaque over the grain.
What about the perforated base — is it for incense or aroma?
The perforated wood disc at the base is a decorative pattern as part of the carving — it isn't sold as an incense burner or essential-oil diffuser, and there's no separate cavity inside designed for those uses. Some buyers do set unlit incense sticks or a small wax sachet in the holes as a personal touch, but we don't recommend burning incense in or near the lamp because heat and smoke can damage the wood finish and the electronics inside.
Is the battery or the LED replaceable? What's the warranty?
The 6000 mAh Li-Po battery is internal and sealed — it isn't user-replaceable. Lithium batteries typically lose capacity gradually over 300–500 charge cycles, after which run-time will be shorter. The integrated 5W LED is also sealed and not user-replaceable. The lamp carries a 2-year warranty against manufacturing defects in the battery, LED module, touch sensor, charging port, and carved wood body. Email support with your order number if anything fails in normal use. Natural wood variation (grain, tone, carving marks) is part of the material and not covered as a defect.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
