Arcadia Luxe Floor Lamp
BEIJIAN2303051613-1
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- In magazzino, pronto per la spedizione
Arc Floor Lamp — white marble base, stainless steel arc arm, polished dome.
A rectangular white marble block — beveled at the corners, with a finger-hole through its face for repositioning — anchors the base. From it a stainless steel arm rises vertically and then curves in a long arc overhead, extending several feet out from the base before descending to the polished dome shade. The arm and dome are brushed stainless steel; the dome directs warm light downward. Plug-in, three sizes, and available in round or square section arm. The marble base provides sufficient weight to counterbalance the arc without wall attachment.
Heavy freight — marble base ships by truck only
The genuine marble base is extremely heavy. This product cannot be shipped by standard parcel courier — it requires truck freight delivery to your address. Delivery times and rates differ from standard shipping. A liftgate or ground-level delivery point is recommended. If you live in an upper-floor apartment without elevator access, please contact us before ordering to confirm delivery feasibility.
Genuine marble — veining and pattern vary between pieces
The base is cut from genuine white marble. The grey veining, mineral inclusions, and tonal variation of each block are determined by where it was cut from the stone slab — no two bases are identical. Product photographs show representative examples. Your lamp’s base will have its own vein pattern.
Plug-in — no installation required
Runs on a 59″ cord with a push-button switch. Place anywhere, plug in. No hardwiring or electrician required.
Marble Base
Genuine white marble with beveled corners and a carry-hole — heavy enough to counterbalance the arc.
Stainless Arc Arm
Brushed stainless steel — round or square section. Extends overhead, positions the shade over a sofa or chair.
Polished Dome Shade
Brushed stainless steel dome directs warm light downward — reading, dining, or ambient.
Select arm style at time of order. Both share the same marble base, dome shade, and three available sizes. Tap to enlarge.
Right: Square tube arm — rectangular cross-section, more angular and architectural.
Circular section arm — the classic arc floor lamp profile. Slightly softer visual line.
Square TubeRectangular section arm — harder edge, more contemporary and architectural feel.
Specify in order notes or contact us if unsure which to choose.
W = horizontal reach of the arc. H = total height from floor to arc peak. Tap each diagram to enlarge.
E26 (US/CA) or E27 (EU/AU) — max 40W, bulb not included
Compatible with LED and Edison filament bulbs up to 40W total. A warm-white LED at 2700–3000 K at 8–15W provides comfortable reading and ambient light from the downward dome position. The polished interior of the dome reflects and concentrates light downward — a globe or standard A-shape E26/E27 LED distributes well within the dome. A large Edison filament globe (G25 or G30 shape) is visible from the side through the dome opening and adds visible filament character if that is your preference. Do not exceed 40W total to avoid overheating the dome shade.
Guide to E26 and E27 bulb selection →
| Materials | Genuine White Marble, Stainless Steel |
| Sizes | Small: W 165 × H 190 cm / W 64.9″ × H 74.8″ Medium: W 180 × H 210 cm / W 70.9″ × H 82.6″ Large: W 210 × H 230 cm / W 82.7″ × H 90.6″ |
| Arm style options | Round Pipe · Square Tube — select at order |
| Bulb base | E26 (US/CA) or E27 (EU/AU) |
| Max power | 40W |
| Light source | LED or Edison filament bulb (not included) |
| Voltage | AC 110–240V |
| Cord | 59″ with push-button on/off switch |
| Power supply | Plug-in — no hardwiring required |
| Mounting | Freestanding floor lamp |
| Environment | Indoor only |
| Base finish | White Marble (genuine — vein pattern varies per piece) |
| Arm & shade finish | Brushed Stainless Steel (Silver) |
| Shipping | ⚠ Truck freight only — marble base is too heavy for parcel courier |
| Certification | North America · EU · AU · Saudi Arabia |
Will the lamp tip over if I position it over a sofa?
The marble base is specifically sized and weighted to counterbalance the arm at its full horizontal extension without wall attachment or tipping. The marble block’s mass anchors the base while the arm extends overhead. Do not lean on the arm or apply lateral force to the shade — this shifts the center of mass and can destabilize the base. Position the base on a flat, level floor surface. Do not place on rugs with thick pile that can allow the base to shift. For homes with children or pets, position the base in a corner or against a wall as additional security.
How do I move the lamp after delivery given the heavy base?
The marble base has a finger-hole through its face specifically for repositioning — use the hole with two hands to lift and carry the base short distances. For moving the assembled lamp across a room, it is easier to separate the arm from the base (following the installation guide), move the base and arm separately, then reassemble in the new position. Two people are strongly recommended for moving the lamp. The base is very heavy — use proper lifting posture and footwear.
Which size should I choose for my ceiling height?
The H dimension is the total height from floor to the peak of the arc (not the shade position). At H 190 cm, the lamp works under a standard 240 cm ceiling with reasonable clearance. At H 210 cm, it is suited for ceilings of 270 cm or higher. At H 230 cm, a ceiling of at least 280–300 cm is recommended to avoid the arm touching the ceiling at its peak. Measure your ceiling height before selecting — the arc rises to its peak before descending to the shade, so the peak height is the critical clearance dimension.
Is the Arc Floor Lamp certified for North America and Europe?
Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
