Frilla Ceramic Table Lamp
VKT5-26525-04
- Standard Shipping to the United States
- Warranty Coverage Available
- 60-Day Returns on Eligible Items
- Customer Support by Email & Phone
- Personalized Customization Available
- Multiple Shipping Options Available
- Safe and Secure Payments
- Available in Region-Specific Electrical Options
- En stock
The Frilla is a sculptural ceramic table lamp with a hand-built body of layered, ruffled petals in a white glaze, edged with natural raw clay that warms toward the base. A brass-tone stem lifts a tailored off-white fabric drum shade above it. At 15″ wide and 23.6″ tall, it reads as a piece of art as much as a light — a quiet, organic accent for a console, a nightstand, or a living-room side table.
Ruffled ceramic body
A hand-built body of layered, petal-like ruffles; the glaze and clay edges vary on every piece.
Off-white drum shade
A tailored fabric drum shade softens the light into a warm, even glow with no harsh glare.
Single E27 light
One E27 socket — set the brightness and color with the bulb you choose.
Sculptural ceramic base
15″ wide × 23.6″ tall. White-glazed ruffles with raw clay edges; each piece varies.
Fabric drum shade
Off-white drum shade on a brass-tone stem, balancing the organic base with a clean, simple top.
Default configuration
Pictured: white-glaze ceramic body with natural raw-clay edges, brass-tone stem, off-white fabric drum shade. Takes one E27 bulb.
Bulb base
This lamp uses one E27 (large Edison screw) socket on 110–240V. US E26 bulbs thread into E27 and work on 120V, so standard US bulbs fit. Warm white (2700K) suits the soft, organic look. Questions? Email us.
| Model | Width × Height | Body | Light |
|---|---|---|---|
| Frilla ceramic lamp | 15″ × 23.6″ | White glaze, raw clay edges | 1 × E27 · LED-ready |
Click any diagram to enlarge.
Click to enlarge ↗
| Material | Ceramic, Fabric |
| Body finish | White glaze with natural raw-clay edges |
| Shade finish | Off-white fabric drum shade |
| Light source | One E27 socket (large Edison screw) · LED-ready |
| Size | 15″ W × 23.6″ H (38 × 60 cm) |
| Voltage | AC 110–240V (universal) |
| Power | Table lamp with inline cord switch; plug-in |
| Suggested bulb | E27/E26 LED, warm white (2700K) recommended |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Plug-in table lamp — no hardwiring needed; seat the shade and plug it in.
- Place it on a level, stable surface; the ceramic base is weighty, so support it from the bottom when moving.
- Use an E27 or E26 bulb rated for 110–240V; warm white (2700K) suits the soft look.
- Use an LED bulb so the fabric shade and ceramic body stay cool in use.
- Wipe with a soft dry cloth; the raw-clay edges are unglazed, so avoid soaking them.
- Each ceramic body is hand-built, so ruffles, glaze, and clay tone vary piece to piece; the photograph shows a representative sample.
What bulb does the Frilla use, and will US bulbs fit?
It takes one E27 bulb — the large Edison screw. US E26 bulbs thread into E27 and run on 120V, so standard US bulbs work fine. A warm-white (2700K) LED suits the soft, organic look of the ceramic base.
Will my lamp look exactly like the photo?
Close, but not identical. The body is hand-built ceramic, so the ruffles, white glaze, and raw-clay edges vary slightly from piece to piece. That variation is part of the handmade character — the photograph shows a representative sample.
How big is it, and where does it fit?
It's 15″ wide and 23.6″ tall — a substantial table lamp. It suits a console, a wide nightstand, or a living-room side table where the sculptural base has room to be seen.
How do I clean the ceramic base?
Wipe the glazed surfaces with a soft, dry or barely damp cloth. The raw-clay edges are unglazed and more porous, so keep them dry and avoid soaking or harsh cleaners. No abrasive pads.
What is the warranty and support?
2-year warranty on the wiring and fittings; the hand-built ceramic is covered against manufacturing defects, with natural variation excluded. Bulbs are consumable and not covered, but they're inexpensive E27/E26 replacements. Email support replies within one business day.
If it is a product quality problem or transportation damage, we will provide free return and exchange services, ensuring a hassle-free experience for our customers.
PRODUCT CUT SHEET
Design with Confidence: Vakkerlight 3D Lighting Service
Take the guesswork out of lighting design. Whether for residential or commercial spaces, Vakkerlight’s innovative 3D Lighting Design Service lets you visualize and customize fixtures in a realistic 3D environment before you buy.
- Personalized Solutions: Custom arrangements tailored to your exact space.
- True-to-Life 3D: See how your fixtures will look before installation.
- Expert Support: Get 1-on-1 guidance from our design specialists.
Resources & Support:
Visit our [3D Lighting Design Service page] to learn more. Need 3D Max files or detailed product parameters? Email us at info@vakkerlight.com and our team will be happy to assist you.
