Pivot Hardwired Swing-Arm Wall Lamp
VKW7-26831-01
- Standardversand in die Vereinigten Staaten
- Garantieabdeckung verfügbar
- 60-Tage-Rückgabe für berechtigte Artikel
- Kundenunterstützung per E-Mail und Telefon
- Personalisierte Anpassung verfügbar
- Mehrere Versandoptionen verfügbar
- Sichere und geschützte Zahlungen
- Verfügbar in regionsspezifischen Elektrooptionen
- Auf Lager
The Pivot Hardwired Swing-Arm Wall Lamp is a double-jointed articulated task light in baked-enamel aviation aluminum, with smooth, electroplated pivot joints and a switch built right into the lamp head. This version wires directly into a wall junction box rather than plugging into an outlet, for a clean, cord-free installation.
Double-jointed swing arm
An articulated, double-jointed arm lets you angle and extend the lamp head to where you need it.
Aviation aluminum, baked enamel
Cast in aviation-grade aluminum with a baked-enamel finish on the shade, and smooth, electroplated joints.
Built-in switch, hardwired
The switch is built into the lamp head, and the fixture wires directly into a wall junction box.
Standard Arm
Upper arm 34 cm, lower arm 25 cm; overall reach approx. 25–31 cm tall when extended. Shown in our Red and Yellow reference photos.
Extended Arm
Upper arm 45 cm, lower arm 36 cm; overall reach approx. 36–42 cm tall when extended. Shown in our Blue reference photo.
The source material shows a "Standard Arm" dimension diagram for the Red and Yellow photos, and a separate, larger "Extended Arm" diagram for the Blue photo — but doesn't explicitly confirm whether both arm lengths are offered in all three colors, or whether each color ships in only the size shown. Please confirm the actual size/color combinations available with your supplier before publishing.
Add product dimension image here.
| Standard Arm | |
| Upper Arm | 34 cm / 13.4″ |
| Lower Arm | 25 cm / 9.8″ |
| Height Range | 25–31 cm / 9.8″–12.2″ |
| Extended Arm | |
| Upper Arm | 45 cm / 17.7″ |
| Lower Arm | 36 cm / 14.2″ |
| Height Range | 36–42 cm / 14.2″–16.5″ |
| Shared | |
| Shade Width | 20 cm / 7.9″ |
| Wall Plate | Φ12 cm / Φ4.7″ |
| Product Name | Pivot Hardwired Swing-Arm Wall Lamp |
| Product Type | Wall Lamp (Articulated, Hardwired) |
| Material | Aviation-Grade Aluminum, Baked Enamel Finish |
| Color Options | Blue, Yellow, Red |
| Size Options | Standard Arm, Extended Arm — see note above on color/size combinations |
| Bulb Socket | E27 |
| Wattage | 12W (bulb inclusion not confirmed — see caveat below) |
| Switch | Built into the lamp head |
| Wiring | Hardwired |
| Mounting | Wall Mounted, articulated swing arm |
| Suitable Spaces | Bedside, study |
| Environment | Indoor |
This hardwired version was requested as a variant of our plug-in Pivot Swing-Arm Wall Lamp — the original supplier photos and dimension diagrams only showed a plug-in cord and plug, with no hardwired configuration pictured or confirmed. Please verify with your supplier that a genuine hardwired version exists (including its wiring/junction-box requirements and any certification) before publishing this page. The source listing also gives bulb socket (E27) and wattage (12W) but doesn't state whether a bulb is included, nor does it give a color temperature. These have been left out rather than guessed.
- Requires a wall junction box; wire directly into your home's electrical system per local electrical code.
- This fixture must be installed by a licensed electrician.
- Mount to a secure wall surface using hardware suitable for the fixture weight.
- Wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth; avoid abrasive scrubbers or harsh chemical cleaners.
- Allow the bulb to cool before handling, and switch off power at the breaker before cleaning or relamping.
- Intended for indoor, dry use.
What colors and sizes are available?
Three colors — Blue, Yellow, and Red — and two arm lengths, Standard and Extended. Please contact us to confirm which arm lengths are available in which colors.
Does it come with a bulb, and what socket does it use?
It uses a standard E27 socket rated for a 12W bulb. Bulb inclusion wasn't confirmed in the listing we received — please contact us before ordering.
Is it hardwired or plug-in?
It's hardwired — the fixture wires directly into a wall junction box rather than plugging into an outlet, and the switch is built into the lamp head. Installation should be done by a licensed electrician.
How is it mounted?
It mounts to the wall via a round base plate, with a double-jointed articulated arm that swings and extends. We recommend secure wall-anchor hardware suited to the fixture weight.
How do I clean it?
Switch off power at the breaker first, then wipe the enamel-finished shade and aluminum arm with a soft, dry or slightly damp cloth. Avoid abrasive scrubbers or harsh chemical cleaners.
Bei Produktqualitätsmängeln oder Transportschäden bieten wir kostenlosen Umtausch und Austausch an und gewährleisten so ein reibungsloses Erlebnis für unsere Kunden.
PRODUKTDATENBLATT
Gestalten Sie mit Vertrauen: Vakkerlight 3D-Lighting-Service
Nehmen Sie die Unsicherheit aus der Beleuchtungsplanung. Ob für Wohnräume oder gewerbliche Räume – der innovative 3D-Lighting-Design-Service von Vakkerlight ermöglicht es Ihnen, Leuchten in einer realistischen 3D-Umgebung zu visualisieren und anzupassen, bevor Sie kaufen.
- Maßgeschneiderte Lösungen: Benutzerdefinierte Anordnungen, die genau auf Ihren Raum abgestimmt sind.
- Authentische 3D-Visualisierung: Sehen Sie, wie Ihre Leuchten vor der Installation aussehen werden.
- Fachmännische Unterstützung: Erhalten Sie 1-zu-1-Beratung von unseren Designspezialisten.
Ressourcen und Unterstützung:
Besuchen Sie unsere [3D-Lighting-Design-Service-Seite], um mehr zu erfahren. Benötigen Sie 3D-Max-Dateien oder detaillierte Produktparameter? Schreiben Sie uns an info@vakkerlight.com und unser Team hilft Ihnen gerne weiter.
